On Thu, Feb 12, 2015 at 11:45 AM, Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx> wrote: > This patch adds clocksource support for ARMv7-M's System timer, > also known as SysTick. > > Signed-off-by: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx> > --- > .../devicetree/bindings/arm/system_timer.txt | 15 +++++ Please include v7M in the name. System timer sounds very generic. This is the only timer architecturally defined IIRC, so perhaps just "armv7m_systick". > drivers/clocksource/Kconfig | 7 ++ > drivers/clocksource/Makefile | 1 + > drivers/clocksource/arm_system_timer.c | 74 ++++++++++++++++++++++ Same here. > 4 files changed, 97 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/system_timer.txt > create mode 100644 drivers/clocksource/arm_system_timer.c > > diff --git a/Documentation/devicetree/bindings/arm/system_timer.txt b/Documentation/devicetree/bindings/arm/system_timer.txt > new file mode 100644 > index 0000000..35268b7 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/system_timer.txt > @@ -0,0 +1,15 @@ > +* ARM System Timer > + > +ARMv7-M includes a system timer, known as SysTick. Current driver only > +implements the clocksource feature. > + > +Required properties: > +- compatible : Should be "arm,armv7m-systick" > +- reg : The address range of the timer > +- clocks : The input clock of the timer You may want to consider supporting "clock-frequency" here too. In more simple chips you may just have fixed clocks and may want to run a kernel with COMMON_CLK disabled for size savings. > + > +systick: system-timer { This should be "systick: timer@e000e010". Same for your dts file. > + compatible = "arm,armv7m-systick"; > + reg = <0xe000e010 0x10>; > + clocks = <&clk_systick>; > +}; > diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig > index fc01ec2..f9fe4ac 100644 > --- a/drivers/clocksource/Kconfig > +++ b/drivers/clocksource/Kconfig > @@ -124,6 +124,13 @@ config CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK > help > Use ARM global timer clock source as sched_clock > > +config ARM_SYSTEM_TIMER > + bool > + select CLKSRC_OF if OF > + select CLKSRC_MMIO > + help > + This options enables support for the ARM system timer unit > + > config ATMEL_PIT > select CLKSRC_OF if OF > def_bool SOC_AT91SAM9 || SOC_SAMA5 > diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile > index 94d90b2..194400b 100644 > --- a/drivers/clocksource/Makefile > +++ b/drivers/clocksource/Makefile > @@ -42,6 +42,7 @@ obj-$(CONFIG_MTK_TIMER) += mtk_timer.o > > obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o > obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o > +obj-$(CONFIG_ARM_SYSTEM_TIMER) += arm_system_timer.o > obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o > obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST) += dummy_timer.o > obj-$(CONFIG_ARCH_KEYSTONE) += timer-keystone.o > diff --git a/drivers/clocksource/arm_system_timer.c b/drivers/clocksource/arm_system_timer.c > new file mode 100644 > index 0000000..69e6ef9 > --- /dev/null > +++ b/drivers/clocksource/arm_system_timer.c > @@ -0,0 +1,74 @@ > +/* > + * Copyright (C) Maxime Coquelin 2015 > + * Author: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx> > + * License terms: GNU General Public License (GPL), version 2 > + */ > + > +#include <linux/kernel.h> > +#include <linux/clocksource.h> > +#include <linux/clockchips.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <linux/clk.h> > +#include <linux/bitops.h> > + > +#define SYST_CSR 0x00 > +#define SYST_RVR 0x04 > +#define SYST_CVR 0x08 > +#define SYST_CALIB 0x0c > + > +#define SYST_CSR_ENABLE BIT(0) > + > +#define SYSTICK_LOAD_RELOAD_MASK 0x00FFFFFF > + > +static void __init system_timer_of_register(struct device_node *np) > +{ > + struct clk *clk; > + void __iomem *base; > + unsigned long rate; > + int ret; > + > + base = of_iomap(np, 0); > + if (!base) { > + pr_warn("system-timer: invalid base address\n"); > + return; > + } > + > + clk = of_clk_get(np, 0); > + if (IS_ERR(clk)) { > + pr_warn("system-timer: clk not found\n"); > + ret = PTR_ERR(clk); > + goto out_unmap; > + } > + > + ret = clk_prepare_enable(clk); > + if (ret) > + goto out_clk_put; > + > + rate = clk_get_rate(clk); > + > + writel_relaxed(SYSTICK_LOAD_RELOAD_MASK, base + SYST_RVR); > + writel_relaxed(SYST_CSR_ENABLE, base + SYST_CSR); > + > + ret = clocksource_mmio_init(base + SYST_CVR, "arm_system_timer", rate, > + 200, 24, clocksource_mmio_readl_down); > + if (ret) { > + pr_err("failed to init clocksource (%d)\n", ret); > + goto out_clk_disable; > + } > + > + pr_info("ARM System timer initialized as clocksource\n"); > + > + return; > + > +out_clk_disable: > + clk_disable_unprepare(clk); > +out_clk_put: > + clk_put(clk); > +out_unmap: > + iounmap(base); > + WARN(ret, "ARM System timer register failed (%d)\n", ret); > +} > + > +CLOCKSOURCE_OF_DECLARE(arm_systick, "arm,armv7m-systick", > + system_timer_of_register); > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html