Re: [PATCH 09/10] ARM: mvebu: add Device Tree files for Armada 39x SoC and board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Feb 06, 2015 at 04:57:55PM +0100, Thomas Petazzoni wrote:
> This commit adds the Device Tree files for the Armada 39x family of
> processors, as well as one Armada 398 Development Board.
> 
> Like for other Marvell EBU families, a common armada-39x.dtsi contains
> the description of the common features of all Armada 39x SoCs, while
> armada-390.dtsi and armada-398.dtsi respectively describe the
> specificities of those SoCs.
> 
> Finally, an armada-398-db.dts file is added to describe the Armada 398
> Development Board itself.
> 
> So far, the following features are supported:
> 
>  * SMP: dual Cortex-A9
>  * Basic ARM IPs: SCU, timer, GIC
>  * Basic Marvell IPs: pin-muxing, clocks, system controller, MBus
>    controller, MPIC interrupt controller, timer, CPU reset for SMP,
>    PMSU.
>  * I2C
>  * UART
>  * PCIe
> 
> Additional features will be supported in the future.
> 
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/Makefile          |   2 +
>  arch/arm/boot/dts/armada-390.dtsi   |  57 ++++++
>  arch/arm/boot/dts/armada-398-db.dts | 116 +++++++++++
>  arch/arm/boot/dts/armada-398.dtsi   |  60 ++++++
>  arch/arm/boot/dts/armada-39x.dtsi   | 372 ++++++++++++++++++++++++++++++++++++
>  5 files changed, 607 insertions(+)
>  create mode 100644 arch/arm/boot/dts/armada-390.dtsi
>  create mode 100644 arch/arm/boot/dts/armada-398-db.dts
>  create mode 100644 arch/arm/boot/dts/armada-398.dtsi
>  create mode 100644 arch/arm/boot/dts/armada-39x.dtsi
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 968bc7a..64886fb 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -540,6 +540,8 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
>  	armada-388-db.dtb \
>  	armada-388-gp.dtb \
>  	armada-388-rd.dtb
> +dtb-$(CONFIG_MACH_ARMADA_39X) += \
> +	armada-398-db.dtb
>  dtb-$(CONFIG_MACH_ARMADA_XP) += \
>  	armada-xp-axpwifiap.dtb \
>  	armada-xp-db.dtb \
> diff --git a/arch/arm/boot/dts/armada-390.dtsi b/arch/arm/boot/dts/armada-390.dtsi
> new file mode 100644
> index 0000000..094e39c
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-390.dtsi
> @@ -0,0 +1,57 @@
> +/*
> + * Device Tree Include file for Marvell Armada 390 SoC.
> + *
> + * Copyright (C) 2015 Marvell
> + *
> + * Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include "armada-39x.dtsi"
> +
> +/ {
> +	soc {
> +		internal-regs {
> +			pinctrl@18000 {
> +				compatible = "marvell,mv88f6920-pinctrl";
> +				reg = <0x18000 0x20>;
> +			};
> +		};
> +};
> diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts
> new file mode 100644
> index 0000000..b889864
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-398-db.dts
> @@ -0,0 +1,116 @@
> +/*
> + * Device Tree Include file for Marvell Armada 398 Development Board
> + *
> + * Copyright (C) 2015 Marvell
> + *
> + * Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "armada-398.dtsi"
> +
> +/ {
> +	model = "Marvell Armada 398 Development Board";
> +	compatible = "marvell,a398-db", "marvell,armada398", "marvell,armada390";
> +
> +	chosen {
> +		bootargs = "console=ttyS0,115200 earlyprintk";
> +	};
> +

Arnd has been encouraging people not use earlyprintk here.  Also a
stdout-path would be nice. We also seem to be missing aliases for the
serial ports.

> +	memory {
> +		device_type = "memory";
> +		reg = <0x00000000 0x80000000>; /* 2 GB */
> +	};
> +
> +	soc {
> +		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
> +			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
> +
> +		internal-regs {
> +                        i2c@11000 {
> +				pinctrl-0 = <&i2c0_pins>;
> +				pinctrl-names = "default";
> +                                status = "okay";
> +                                clock-frequency = <100000>;
> +                        };
> +
> +			serial@12000 {
> +				pinctrl-0 = <&uart0_pins>;
> +				pinctrl-names = "default";
> +				status = "okay";
> +			};
> +

Tab vs space issue here somewhere? Probably the i2c node.

> +			serial@12100 {
> +				pinctrl-0 = <&uart1_pins>;
> +				pinctrl-names = "default";
> +				status = "okay";
> +			};
> +
> +			pinctrl@18000 {
> +				uart0_pins: uart0-pins {
> +					marvell,pins = "mpp0", "mpp1";
> +					marvell,function = "ua0";
> +				};
> +
> +				uart1_pins: uart1-pins {
> +					marvell,pins = "mpp19", "mpp20";
> +					marvell,function = "ua1";
> +				};

Does it make sense to put there in the .dtsi file? I know there are
other choices, but generally board manufacturers tend to follow the
reference design.

	  Andrew

> +			};
> +		};
> +
> +		pcie-controller {
> +			status = "okay";
> +
> +			pcie@1,0 {
> +				status = "okay";
> +			};
> +
> +			pcie@2,0 {
> +				status = "okay";
> +			};
> +
> +			pcie@3,0 {
> +				status = "okay";
> +			};
> +		};
> +	};
> +};
> diff --git a/arch/arm/boot/dts/armada-398.dtsi b/arch/arm/boot/dts/armada-398.dtsi
> new file mode 100644
> index 0000000..fdc2591
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-398.dtsi
> @@ -0,0 +1,60 @@
> +/*
> + * Device Tree Include file for Marvell Armada 398 SoC.
> + *
> + * Copyright (C) 2015 Marvell
> + *
> + * Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include "armada-39x.dtsi"
> +
> +/ {
> +	compatible = "marvell,armada398", "marvell,armada390";
> +
> +	soc {
> +		internal-regs {
> +			pinctrl@18000 {
> +				compatible = "marvell,mv88f6928-pinctrl";
> +				reg = <0x18000 0x20>;
> +			};
> +		};
> +	};
> +};
> diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
> new file mode 100644
> index 0000000..e248332
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-39x.dtsi
> @@ -0,0 +1,372 @@
> +/*
> + * Device Tree Include file for Marvell Armada 39x family of SoCs.
> + *
> + * Copyright (C) 2015 Marvell
> + *
> + * Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include "skeleton.dtsi"
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
> +
> +/ {
> +	model = "Marvell Armada 39x family SoC";
> +	compatible = "marvell,armada390";
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		enable-method = "marvell,armada-390-smp";
> +
> +		cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a9";
> +			reg = <0>;
> +		};
> +		cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a9";
> +			reg = <1>;
> +		};
> +	};
> +
> +	soc {
> +		compatible = "marvell,armada390-mbus", "marvell,armadaxp-mbus",
> +			     "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <1>;
> +		controller = <&mbusc>;
> +		interrupt-parent = <&gic>;
> +		pcie-mem-aperture = <0xe0000000 0x8000000>;
> +		pcie-io-aperture  = <0xe8000000 0x100000>;
> +
> +		bootrom {
> +			compatible = "marvell,bootrom";
> +			reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
> +		};
> +
> +		internal-regs {
> +			compatible = "simple-bus";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
> +
> +			scu@c000 {
> +				compatible = "arm,cortex-a9-scu";
> +				reg = <0xc000 0x100>;
> +			};
> +
> +			timer@c600 {
> +				compatible = "arm,cortex-a9-twd-timer";
> +				reg = <0xc600 0x20>;
> +				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
> +				clocks = <&coreclk 2>;
> +			};
> +
> +			gic: interrupt-controller@d000 {
> +				compatible = "arm,cortex-a9-gic";
> +				#interrupt-cells = <3>;
> +				#size-cells = <0>;
> +				interrupt-controller;
> +				reg = <0xd000 0x1000>,
> +				      <0xc100 0x100>;
> +			};
> +
> +			i2c0: i2c@11000 {
> +				compatible = "marvell,mv64xxx-i2c";
> +				reg = <0x11000 0x20>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> +				timeout-ms = <1000>;
> +				clocks = <&coreclk 0>;
> +				status = "disabled";
> +			};
> +
> +			i2c1: i2c@11100 {
> +				compatible = "marvell,mv64xxx-i2c";
> +				reg = <0x11100 0x20>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> +				timeout-ms = <1000>;
> +				clocks = <&coreclk 0>;
> +				status = "disabled";
> +			};
> +
> +			i2c2: i2c@11200 {
> +				compatible = "marvell,mv64xxx-i2c";
> +				reg = <0x11200 0x20>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> +				timeout-ms = <1000>;
> +				clocks = <&coreclk 0>;
> +				status = "disabled";
> +			};
> +
> +			i2c3: i2c@11300 {
> +				compatible = "marvell,mv64xxx-i2c";
> +				reg = <0x11300 0x20>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> +				timeout-ms = <1000>;
> +				clocks = <&coreclk 0>;
> +				status = "disabled";
> +			};
> +
> +			serial@12000 {
> +				compatible = "snps,dw-apb-uart";
> +				reg = <0x12000 0x100>;
> +				reg-shift = <2>;
> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> +				reg-io-width = <1>;
> +				clocks = <&coreclk 0>;
> +				status = "disabled";
> +			};
> +
> +			serial@12100 {
> +				compatible = "snps,dw-apb-uart";
> +				reg = <0x12100 0x100>;
> +				reg-shift = <2>;
> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> +				reg-io-width = <1>;
> +				clocks = <&coreclk 0>;
> +				status = "disabled";
> +			};
> +
> +			serial@12200 {
> +				compatible = "snps,dw-apb-uart";
> +				reg = <0x12200 0x100>;
> +				reg-shift = <2>;
> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> +				reg-io-width = <1>;
> +				clocks = <&coreclk 0>;
> +				status = "disabled";
> +			};
> +
> +			serial@12300 {
> +				compatible = "snps,dw-apb-uart";
> +				reg = <0x12300 0x100>;
> +				reg-shift = <2>;
> +				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> +				reg-io-width = <1>;
> +				clocks = <&coreclk 0>;
> +				status = "disabled";
> +			};
> +
> +			pinctrl@18000 {
> +				i2c0_pins: i2c0-pins {
> +					marvell,pins = "mpp2", "mpp3";
> +					marvell,function = "i2c0";
> +				};
> +			};
> +
> +			system-controller@18200 {
> +				compatible = "marvell,armada-390-system-controller",
> +					     "marvell,armada-370-xp-system-controller";
> +				reg = <0x18200 0x100>;
> +			};
> +
> +			gateclk: clock-gating-control@18220 {
> +				compatible = "marvell,armada-390-gating-clock";
> +				reg = <0x18220 0x4>;
> +				clocks = <&coreclk 0>;
> +				#clock-cells = <1>;
> +			};
> +
> +			coreclk: mvebu-sar@18600 {
> +				compatible = "marvell,armada-390-core-clock";
> +				reg = <0x18600 0x04>;
> +				#clock-cells = <1>;
> +			};
> +
> +			mbusc: mbus-controller@20000 {
> +				compatible = "marvell,mbus-controller";
> +				reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
> +			};
> +
> +			mpic: interrupt-controller@20000 {
> +				compatible = "marvell,mpic";
> +				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
> +				#interrupt-cells = <1>;
> +				#size-cells = <1>;
> +				interrupt-controller;
> +				msi-controller;
> +				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
> +			};
> +
> +			timer@20300 {
> +				compatible = "marvell,armada-380-timer",
> +					     "marvell,armada-xp-timer";
> +				reg = <0x20300 0x30>, <0x21040 0x30>;
> +				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
> +						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
> +						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
> +						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
> +						      <&mpic 5>,
> +						      <&mpic 6>;
> +				clocks = <&coreclk 2>, <&coreclk 5>;
> +				clock-names = "nbclk", "fixed";
> +			};
> +
> +			cpurst@20800 {
> +				compatible = "marvell,armada-370-cpu-reset";
> +				reg = <0x20800 0x10>;
> +			};
> +
> +			pmsu@22000 {
> +				compatible = "marvell,armada-390-pmsu",
> +					     "marvell,armada-380-pmsu";
> +				reg = <0x22000 0x1000>;
> +			};
> +		};
> +
> +		pcie-controller {
> +			compatible = "marvell,armada-370-pcie";
> +			status = "disabled";
> +			device_type = "pci";
> +
> +			#address-cells = <3>;
> +			#size-cells = <2>;
> +
> +			msi-parent = <&mpic>;
> +			bus-range = <0x00 0xff>;
> +
> +			ranges =
> +			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
> +				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
> +				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
> +				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
> +				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
> +				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
> +				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
> +				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
> +				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
> +				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */
> +				0x82000000 0x4 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
> +				0x81000000 0x4 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO  */>;
> +
> +			/*
> +			 * This port can be either x4 or x1. When
> +			 * configured in x4 by the bootloader, then
> +			 * pcie@4,0 is not available.
> +			 */
> +			pcie@1,0 {
> +				device_type = "pci";
> +				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
> +				reg = <0x0800 0 0 0 0>;
> +				#address-cells = <3>;
> +				#size-cells = <2>;
> +				#interrupt-cells = <1>;
> +				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
> +					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
> +				interrupt-map-mask = <0 0 0 0>;
> +				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> +				marvell,pcie-port = <0>;
> +				marvell,pcie-lane = <0>;
> +				clocks = <&gateclk 8>;
> +				status = "disabled";
> +			};
> +
> +			/* x1 port */
> +			pcie@2,0 {
> +				device_type = "pci";
> +				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
> +				reg = <0x1000 0 0 0 0>;
> +				#address-cells = <3>;
> +				#size-cells = <2>;
> +				#interrupt-cells = <1>;
> +				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
> +					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
> +				interrupt-map-mask = <0 0 0 0>;
> +				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> +				marvell,pcie-port = <1>;
> +				marvell,pcie-lane = <0>;
> +				clocks = <&gateclk 5>;
> +				status = "disabled";
> +			};
> +
> +			/* x1 port */
> +			pcie@3,0 {
> +				device_type = "pci";
> +				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
> +				reg = <0x1800 0 0 0 0>;
> +				#address-cells = <3>;
> +				#size-cells = <2>;
> +				#interrupt-cells = <1>;
> +				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
> +					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
> +				interrupt-map-mask = <0 0 0 0>;
> +				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> +				marvell,pcie-port = <2>;
> +				marvell,pcie-lane = <0>;
> +				clocks = <&gateclk 6>;
> +				status = "disabled";
> +			};
> +
> +			/*
> +			 * x1 port only available when pcie@1,0 is
> +			 * configured as a x1 port
> +			 */
> +			pcie@4,0 {
> +				device_type = "pci";
> +				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
> +				reg = <0x2000 0 0 0 0>;
> +				#address-cells = <3>;
> +				#size-cells = <2>;
> +				#interrupt-cells = <1>;
> +				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
> +					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
> +				interrupt-map-mask = <0 0 0 0>;
> +				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
> +				marvell,pcie-port = <3>;
> +				marvell,pcie-lane = <0>;
> +				clocks = <&gateclk 7>;
> +				status = "disabled";
> +			};
> +		};
> +	};
> +};
> -- 
> 2.1.0
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux