Re: [PATCH v3 3/4] pinctrl: cygnus: add initial IOMUX driver support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ray,

On Mon, Feb 02, 2015 at 06:01:33PM -0800, Ray Jui wrote:
> This adds the initial driver support for the Broadcom Cygnus IOMUX
> controller. The Cygnus IOMUX controller supports group based mux
> configuration but allows certain pins to be muxed to GPIO individually
> 
> Signed-off-by: Ray Jui <rjui@xxxxxxxxxxxx>
> Reviewed-by: Scott Branden <sbranden@xxxxxxxxxxxx>

Just a few random nits/comments...

> ---
>  drivers/pinctrl/bcm/Kconfig              |   13 +
>  drivers/pinctrl/bcm/Makefile             |    5 +-
>  drivers/pinctrl/bcm/pinctrl-cygnus-mux.c | 1087 ++++++++++++++++++++++++++++++
>  3 files changed, 1103 insertions(+), 2 deletions(-)
>  create mode 100644 drivers/pinctrl/bcm/pinctrl-cygnus-mux.c
> 
> diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
> index bc6d048..eb13201 100644
> --- a/drivers/pinctrl/bcm/Kconfig
> +++ b/drivers/pinctrl/bcm/Kconfig
> @@ -19,3 +19,16 @@ config PINCTRL_BCM2835
>  	bool
>  	select PINMUX
>  	select PINCONF
> +
> +config PINCTRL_CYGNUS_MUX
> +	bool "Broadcom Cygnus IOMUX driver"
> +	depends on (ARCH_BCM_CYGNUS || COMPILE_TEST)
> +	select PINMUX
> +	select GENERIC_PINCONF
> +	default ARCH_BCM_CYGNUS
> +	help
> +	  Say yes here to enable the Broadcom Cygnus IOMUX driver.
> +
> +	  The Broadcom Cygnus IOMUX driver supports group based IOMUX
> +	  configuration, with the exception that certain individual pins
> +	  can be overrided to GPIO function
> diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
> index 7ba80a3..bb6beb6 100644
> --- a/drivers/pinctrl/bcm/Makefile
> +++ b/drivers/pinctrl/bcm/Makefile
> @@ -1,4 +1,5 @@
>  # Broadcom pinctrl support
>  
> -obj-$(CONFIG_PINCTRL_BCM281XX)	+= pinctrl-bcm281xx.o
> -obj-$(CONFIG_PINCTRL_BCM2835)	+= pinctrl-bcm2835.o
> +obj-$(CONFIG_PINCTRL_BCM281XX)		+= pinctrl-bcm281xx.o
> +obj-$(CONFIG_PINCTRL_BCM2835)		+= pinctrl-bcm2835.o
> +obj-$(CONFIG_PINCTRL_CYGNUS_MUX)	+= pinctrl-cygnus-mux.o
> diff --git a/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c b/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c
> new file mode 100644
> index 0000000..33565b4
> --- /dev/null
> +++ b/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c
> @@ -0,0 +1,1087 @@
> +/* Copyright (C) 2014-2015 Broadcom Corporation
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * This file contains the Cygnus IOMUX driver that supports group based PINMUX
> + * configuration. Although PINMUX configuration is mainly group based, the
> + * Cygnus IOMUX controller allows certain pins to be individually muxed to GPIO
> + * function, and therefore be controlled by the Cygnus ASIU GPIO controller
> + */
> +
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/slab.h>
> +#include <linux/platform_device.h>
> +#include <linux/pinctrl/pinctrl.h>
> +#include <linux/pinctrl/pinmux.h>
> +#include <linux/pinctrl/pinconf.h>
> +#include <linux/pinctrl/pinconf-generic.h>
> +#include "../core.h"
> +#include "../pinctrl-utils.h"
> +
> +#define CYGNUS_NUM_IOMUX_REGS     8
> +#define CYGNUS_NUM_MUX_PER_REG    8
> +#define CYGNUS_NUM_IOMUX          (CYGNUS_NUM_IOMUX_REGS * \
> +				   CYGNUS_NUM_MUX_PER_REG)
> +
> +/*
> + * Cygnus IOMUX register description
> + *
> + * @offset: register offset for mux configuration of a group
> + * @shift: bit shift for mux configuration of a group
> + * @alt: alternate function to set to
> + */
> +struct cygnus_mux {
> +	unsigned int offset;
> +	unsigned int shift;
> +	unsigned int alt;
> +};
> +
> +/*
> + * Keep track of Cygnus IOMUX configuration and prevent double configuration
> + *
> + * @cygnus_mux: Cygnus IOMUX register description
> + * @is_configured: flag to indicate whether a mux setting has already been
> + * configured
> + */
> +struct cygnus_mux_log {
> +	struct cygnus_mux mux;
> +	bool is_configured;
> +};
> +
> +/*
> + * Group based IOMUX configuration
> + *
> + * @name: name of the group
> + * @pins: array of pins used by this group
> + * @num_pins: total number of pins used by this group
> + * @mux: Cygnus group based IOMUX configuration
> + */
> +struct cygnus_pin_group {
> +	const char *name;
> +	const unsigned *pins;
> +	const unsigned num_pins;
> +	const struct cygnus_mux mux;

Not: the last 2 consts are quite weird - if you want to make an instance
of cygnus_pin_group immutable you declare it as a const (and I see you
are already doing that below). With the structure as it laid out
currently you can only do static initializers.

> +};
> +
> +/*
> + * Cygnus mux function and supported pin groups
> + *
> + * @name: name of the function
> + * @groups: array of groups that can be supported by this function
> + * @num_groups: total number of groups that can be supported by this function
> + */
> +struct cygnus_pin_function {
> +	const char *name;
> +	const char * const *groups;
> +	const unsigned num_groups;

Here as well.

...

> +
> +/*
> + * List of pins in Cygnus
> + */
> +static struct cygnus_pin cygnus_pins[] = {

const?

> +	CYGNUS_PIN_DESC(0, "ext_device_reset_n", 0, 0, 0),
> +	CYGNUS_PIN_DESC(1, "chip_mode0", 0, 0, 0),

...

> +#define CYGNUS_PIN_GROUP(group_name, off, sh, al)	\
> +{							\
> +	.name = #group_name"""_grp",			\

Why do we need extra pair of quotes? BTW we can also do

	.name = __stringify(group_name) "_grp",

> +	.pins = group_name ## _pins,			\
> +	.num_pins = ARRAY_SIZE(group_name ## _pins),	\
> +	.mux = {					\
> +		.offset = off,				\
> +		.shift = sh,				\
> +		.alt = al,				\
> +	}						\
> +}

...

> +
> +static struct pinctrl_ops cygnus_pinctrl_ops = {

const?

> +	.get_groups_count = cygnus_get_groups_count,
> +	.get_group_name = cygnus_get_group_name,
> +	.get_group_pins = cygnus_get_group_pins,
> +	.pin_dbg_show = cygnus_pin_dbg_show,
> +	.dt_node_to_map = cygnus_dt_node_to_map,
> +	.dt_free_map = pinctrl_utils_dt_free_map,
> +};
> +
> +static int cygnus_get_functions_count(struct pinctrl_dev *pctrl_dev)
> +{
> +	struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
> +
> +	return pinctrl->num_functions;
> +}
> +
> +static const char *cygnus_get_function_name(struct pinctrl_dev *pctrl_dev,
> +					    unsigned selector)
> +{
> +	struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
> +
> +	return pinctrl->functions[selector].name;
> +}
> +
> +static int cygnus_get_function_groups(struct pinctrl_dev *pctrl_dev,
> +				      unsigned selector,
> +				      const char * const **groups,
> +				      unsigned * const num_groups)
> +{
> +	struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
> +
> +	*groups = pinctrl->functions[selector].groups;
> +	*num_groups = pinctrl->functions[selector].num_groups;
> +
> +	return 0;
> +}
> +
> +static int cygnus_pinmux_set(struct cygnus_pinctrl *pinctrl,
> +			     const struct cygnus_pin_function *func,
> +			     const struct cygnus_pin_group *grp,
> +			     struct cygnus_mux_log *mux_log)
> +{
> +	const struct cygnus_mux *mux = &grp->mux;
> +	int i;
> +	u32 val, mask = 0x7;
> +	unsigned long flags;
> +
> +	for (i = 0; i < CYGNUS_NUM_IOMUX; i++) {
> +		if (mux->offset != mux_log[i].mux.offset ||
> +		    mux->shift != mux_log[i].mux.shift)
> +			continue;
> +
> +		/* match found if we reach here */
> +
> +		/* if this is a new configuration, just do it! */
> +		if (!mux_log[i].is_configured)
> +			break;
> +
> +		/*
> +		 * IOMUX has been configured previously and one is trying to
> +		 * configure it to a different function
> +		 */
> +		if (mux_log[i].mux.alt != mux->alt) {
> +			dev_err(pinctrl->dev,
> +				"double configuration error detected!\n");
> +			dev_err(pinctrl->dev, "func:%s grp:%s\n",
> +				func->name, grp->name);
> +			return -EINVAL;
> +		} else {
> +			/*
> +			 * One tries to configure it to the same function.
> +			 * Just quit and don't bother
> +			 */
> +			return 0;
> +		}
> +	}
> +
> +	mux_log[i].mux.alt = mux->alt;
> +	mux_log[i].is_configured = true;
> +
> +	spin_lock_irqsave(&pinctrl->lock, flags);
> +
> +	val = readl(pinctrl->base0 + grp->mux.offset);
> +	val &= ~(mask << grp->mux.shift);
> +	val |= grp->mux.alt << grp->mux.shift;
> +	writel(val, pinctrl->base0 + grp->mux.offset);
> +
> +	spin_unlock_irqrestore(&pinctrl->lock, flags);
> +
> +	return 0;
> +}
> +
> +static int cygnus_pinmux_set_mux(struct pinctrl_dev *pctrl_dev,
> +				 unsigned func_select, unsigned grp_select)
> +{
> +	struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
> +	const struct cygnus_pin_function *func =
> +		&pinctrl->functions[func_select];
> +	const struct cygnus_pin_group *grp = &pinctrl->groups[grp_select];
> +
> +	dev_dbg(pctrl_dev->dev, "func:%u name:%s grp:%u name:%s\n",
> +		func_select, func->name, grp_select, grp->name);
> +
> +	dev_dbg(pctrl_dev->dev, "offset:0x%08x shift:%u alt:%u\n",
> +		grp->mux.offset, grp->mux.shift, grp->mux.alt);
> +
> +	return cygnus_pinmux_set(pinctrl, func, grp, pinctrl->mux_log);
> +}
> +
> +static int cygnus_gpio_request_enable(struct pinctrl_dev *pctrl_dev,
> +				      struct pinctrl_gpio_range *range,
> +				      unsigned pin)
> +{
> +	struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
> +	struct cygnus_gpio_mux *mux = pctrl_dev->desc->pins[pin].drv_data;

const?

> +	u32 val;
> +	unsigned long flags;
> +
> +	/* not all pins support GPIO pinmux override */
> +	if (!mux->is_supported)
> +		return -ENOTSUPP;
> +
> +	spin_lock_irqsave(&pinctrl->lock, flags);
> +
> +	val = readl(pinctrl->base1 + mux->offset);
> +	val |= 0x3 << mux->shift;
> +	writel(val, pinctrl->base1 + mux->offset);
> +
> +	spin_unlock_irqrestore(&pinctrl->lock, flags);
> +
> +	dev_dbg(pctrl_dev->dev,
> +		"gpio request enable pin=%u offset=0x%x shift=%u\n",
> +		pin, mux->offset, mux->shift);
> +
> +	return 0;
> +}
> +
> +static void cygnus_gpio_disable_free(struct pinctrl_dev *pctrl_dev,
> +				     struct pinctrl_gpio_range *range,
> +				     unsigned pin)
> +{
> +	struct cygnus_pinctrl *pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
> +	struct cygnus_gpio_mux *mux = pctrl_dev->desc->pins[pin].drv_data;
> +	u32 val;
> +	unsigned long flags;
> +
> +	if (!mux->is_supported)
> +		return;
> +
> +	spin_lock_irqsave(&pinctrl->lock, flags);
> +
> +	val = readl(pinctrl->base1 + mux->offset);
> +	val &= ~(0x3 << mux->shift);
> +	writel(val, pinctrl->base1 + mux->offset);
> +
> +	spin_unlock_irqrestore(&pinctrl->lock, flags);
> +
> +	dev_err(pctrl_dev->dev,
> +		"gpio disable free pin=%u offset=0x%x shift=%u\n",
> +		pin, mux->offset, mux->shift);
> +}
> +
> +static struct pinmux_ops cygnus_pinmux_ops = {

const?

> +	.get_functions_count = cygnus_get_functions_count,
> +	.get_function_name = cygnus_get_function_name,
> +	.get_function_groups = cygnus_get_function_groups,
> +	.set_mux = cygnus_pinmux_set_mux,
> +	.gpio_request_enable = cygnus_gpio_request_enable,
> +	.gpio_disable_free = cygnus_gpio_disable_free,
> +};
> +
> +static struct pinctrl_desc cygnus_pinctrl_desc = {
> +	.name = "cygnus-pinmux",
> +	.pctlops = &cygnus_pinctrl_ops,
> +	.pmxops = &cygnus_pinmux_ops,
> +};
> +
> +static int cygnus_mux_log_init(struct cygnus_pinctrl *pinctrl)
> +{
> +	struct cygnus_mux_log *log;
> +	unsigned int i, j;
> +
> +	pinctrl->mux_log = devm_kcalloc(pinctrl->dev, CYGNUS_NUM_IOMUX,
> +					sizeof(struct cygnus_mux_log),
> +					GFP_KERNEL);
> +	if (!pinctrl->mux_log)
> +		return -ENOMEM;
> +
> +	log = pinctrl->mux_log;
> +	for (i = 0; i < CYGNUS_NUM_IOMUX_REGS; i++) {
> +		for (j = 0; j < CYGNUS_NUM_MUX_PER_REG; j++) {
> +			log = &pinctrl->mux_log[i * CYGNUS_NUM_MUX_PER_REG
> +				+ j];
> +			log->mux.offset = i * 4;
> +			log->mux.shift = j * 4;
> +			log->mux.alt = 0;
> +			log->is_configured = false;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static int cygnus_pinmux_probe(struct platform_device *pdev)
> +{
> +	struct cygnus_pinctrl *pinctrl;
> +	struct resource *res;
> +	int i, ret;
> +	struct pinctrl_pin_desc *pins;
> +	unsigned num_pins = ARRAY_SIZE(cygnus_pins);
> +
> +	pinctrl = devm_kzalloc(&pdev->dev, sizeof(*pinctrl), GFP_KERNEL);
> +	if (!pinctrl)
> +		return -ENOMEM;
> +
> +	pinctrl->dev = &pdev->dev;
> +	platform_set_drvdata(pdev, pinctrl);
> +	spin_lock_init(&pinctrl->lock);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	pinctrl->base0 = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(pinctrl->base0)) {
> +		dev_err(&pdev->dev, "unable to map I/O space\n");
> +		return PTR_ERR(pinctrl->base0);
> +	}
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> +	pinctrl->base1 = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(pinctrl->base1)) {
> +		dev_err(&pdev->dev, "unable to map I/O space\n");
> +		return PTR_ERR(pinctrl->base1);
> +	}
> +
> +	ret = cygnus_mux_log_init(pinctrl);
> +	if (ret) {
> +		dev_err(&pdev->dev, "unable to initialize IOMUX log\n");
> +		return ret;
> +	}
> +
> +	pins = devm_kcalloc(&pdev->dev, num_pins, sizeof(*pins), GFP_KERNEL);
> +	if (!pins)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < num_pins; i++) {
> +		pins[i].number = cygnus_pins[i].pin;
> +		pins[i].name = cygnus_pins[i].name;
> +		pins[i].drv_data = &cygnus_pins[i].gpio_mux;
> +	}
> +
> +	pinctrl->groups = cygnus_pin_groups;
> +	pinctrl->num_groups = ARRAY_SIZE(cygnus_pin_groups);
> +	pinctrl->functions = cygnus_pin_functions;
> +	pinctrl->num_functions = ARRAY_SIZE(cygnus_pin_functions);
> +	cygnus_pinctrl_desc.pins = pins;
> +	cygnus_pinctrl_desc.npins = num_pins;
> +
> +	pinctrl->pctl = pinctrl_register(&cygnus_pinctrl_desc, &pdev->dev,
> +			pinctrl);
> +	if (!pinctrl->pctl) {
> +		dev_err(&pdev->dev, "unable to register Cygnus IOMUX pinctrl\n");
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static struct of_device_id cygnus_pinmux_of_match[] = {
> +	{ .compatible = "brcm,cygnus-pinmux" },
> +	{ }
> +};
> +
> +static struct platform_driver cygnus_pinmux_driver = {
> +	.driver = {
> +		.name = "cygnus-pinmux",
> +		.of_match_table = cygnus_pinmux_of_match,
> +	},
> +	.probe = cygnus_pinmux_probe,

You also need to either provide remove() method or disallow unbinding
via sysfs by setting suppress_bind_attrs in platform driver.

> +};
> +
> +static int __init cygnus_pinmux_init(void)
> +{
> +	return platform_driver_register(&cygnus_pinmux_driver);
> +}
> +arch_initcall(cygnus_pinmux_init);
> +
> +MODULE_AUTHOR("Ray Jui <rjui@xxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Broadcom Cygnus IOMUX driver");
> +MODULE_LICENSE("GPL v2");
> -- 
> 1.7.9.5
> 

Thanks.

-- 
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux