Re: [PATCH v4 2/4] gpio/xilinx: Convert the driver to platform device interface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello

I cannot do only of_mm_gpiochip_remove before only_one_gpio_device,
because I have to restore the initial io address :S.
Anyway I have prepared a new patchset with hopefully all you need. I
have resend also the old patches so you can have a general view.

I think that only gpio-mpc5200.c would benefit from the new API, I can
send a patchset to support removal and use the new API if you want.


Thanks!

On Wed, Dec 17, 2014 at 3:05 PM, Alexandre Courbot <gnurou@xxxxxxxxx> wrote:
> On Wed, Dec 17, 2014 at 10:31 PM, Ricardo Ribalda Delgado
> <ricardo.ribalda@xxxxxxxxx> wrote:
>> On Wed, Dec 17, 2014 at 2:26 PM, Alexandre Courbot <gnurou@xxxxxxxxx> wrote:
>>> On Wed, Dec 17, 2014 at 8:02 PM, Ricardo Ribalda Delgado
>>> <ricardo.ribalda@xxxxxxxxx> wrote:
>>>> Hello Alexandre
>>>>
>>>>> This should not be here. The mapping and call to gpiochip_add() are
>>>>> performed by of_mm_gpiochip_add(). We should thus have a
>>>>> of_mm_gpiochip_remove() function that undoes what _add did instead of
>>>>> expected all users to do unmap themselves. Can you add a patch to your
>>>>> series that adds this function?
>>>>
>>>>>
>>>>> Also I am not sure I understand why the unmapping is done only once.
>>>>> Both chips are supposed to have been added (and thus mapped) at this
>>>>> stage. Oh right I see, so this driver ends up mapping the same area
>>>>> twice! Not only are you iomapping the same area twice, you are
>>>>> unmapping it only once, and only if the chip is dual. This looks very
>>>>> broken.
>>>>>
>>>>
>>>> If you look carefully you can see that it is unmapped twice if it is
>>>> called twice. iounmap is called inside the  for loop.
>>>
>>> D'oh, you are right of course. I don't know why, but I thought the
>>> iounmap() was part of the if (i == 1) conditional block. >_<
>>>
>>>>
>>>>
>>>>> Couldn't you redesign the driver the following way: only add one chip
>>>>> (since you have 1 DT node), with an extra member to track which GPIOs
>>>>> belong to the second chip (in case it is dual), and change the other
>>>>> functions to handle this.
>>>>
>>>> I do not mind rearranging the driver so there is only one gpio device,
>>>> even for dual chips, but I think this should be done in a separate
>>>> patch.
>>>>
>>>> What about?
>>>>
>>>> 1) Keep the current patchset
>>>>
>>>> and then
>>>>
>>>> 2) Add another patchset with
>>>>
>>>>   - xilinx-gpio: only one gpio device
>>>>   - add  of_mm_gpiochip_remove() to the api
>>>>   - xilinx gpio: use of_mm_gpiochip_remove
>>>>   - others: use of_mm_gpiochip_remove
>>>
>>> I think this would look better this way:
>>>
>>> - xilinx-gpio: remove offset property
>>> - xilinx-gpio: only one gpio device
>>> - add  of_mm_gpiochip_remove() to the api
>>> - xilinx-gpio: use of_mm_gpiochip_remove
>>> - xilinx-gpio: Convert the driver to platform device interface.
>>>
>>> (others: use of_mm_gpiochip_remove would be appreciated of course, but
>>> I won't ask you to go that far and fix everybody).
>>>
>>> The reason for this order is that your current patch would be shorter
>>> is the driver is turned to add one device only first. It's also
>>> generally better to work on cleaner code. But to switch the driver to
>>> single-device, you will first need to remove the offset property
>>> (IIUC, at least).
>>
>>
>> I totally see your point but I rather do not touch the first patchset,
>> two reasons.
>>
>> One is that other people has already acked it and that it will make my
>> life easier and probably have it ready before the holidays :)
>
> Maintainers are also interested in making their life easier, you know
> - a concern that should be shared by anyone who wants to see their
> patches merged. ;)
>
>>
>>
>> Anyway I could change your mind to:
>>  - xilinx-gpio: remove offset property
>>  - xilinx-gpio: Convert the driver to platform device interface.
>>  - xilinx-gpio: only one gpio device
>>  - add  of_mm_gpiochip_remove() to the api
>>  - xilinx-gpio: use of_mm_gpiochip_remove
>> ?
>
> Well, at the end of the day it would be the same, and even in its
> current form this patch is an improvement. So I guess it would be ok.
> What I like about my plan is that this patch comes last, so you are
> obliged to reorganize the driver - whereas if we merge this series now
> you can just run away. :P
>
> Let's do this way:
>
> - xilinx-gpio: remove offset property
> - add  of_mm_gpiochip_remove() to the api
> - xilinx-gpio: Convert the driver to platform device interface (using
> of_mm_gpiochip_remove())
> - xilinx-gpio: only one gpio device (if you don't run away, that is)
>
> Adding of_mm_gpiochip_remove() is a trivial task, but is really
> critical to remove the device correctly, which your platform device
> patch needs to do. It won't add much work for you, but at least all
> the improvements that are non-local to the xilinx driver will be
> there.
>
> Deal?



-- 
Ricardo Ribalda
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux