On 12/12/2014 7:28 AM, Arnd Bergmann wrote:
On Friday 12 December 2014 22:05:37 Alexandre Courbot wrote:
On Fri, Dec 12, 2014 at 9:08 PM, Arnd Bergmann <arnd@xxxxxxxx> wrote:
On Thursday 11 December 2014 16:05:04 Ray Jui wrote:
+
+- linux,gpio-base:
+ Base GPIO number of this controller
+
We've NAK'ed properties like this multiple times before, and it
doesn't get any better this time. What are you trying to achieve
here?
I am to blame for suggesting using this property to Ray, and I am
fully aware that this has been rejected before, but look at what
people came with recently to palliate the lack of control over the
GPIO number space for DT platforms:
http://www.spinics.net/lists/arm-kernel/msg384847.html
https://lkml.org/lkml/2014/12/10/133
Right now GPIO numbering for platforms using DT is a very inconsistent
process, subject to change by the simple action of adjusting the value
of ARCH_NR_GPIOS (which we did recently, btw), adding a new GPIO
controller, or changing the probe order of devices. For users of the
integer or sysfs interfaces, this results in GPIO numbers that change,
and drivers and/or user-space programs that behave incorrectly.
Ironically, the only way to have consistent numbers is to use the old
platform files, where you can specify the base number of a gpio_chip.
DT is actually probably not such a bad place to provide consistency in
GPIO numbering. It has a global vision of the system layout, including
all GPIO controllers and the number of GPIOs they include, and thus
can make informed decisions. It provides a consistent result
regardless of probe order. And allowing it to assign GPIO bases to
controllers will free us from the nonsensical dependency of some
arbitrary upper-bound for GPIO numbers that ARCH_NR_GPIOS imposes on
us. Also about ARCH_NR_GPIOS, the plan is to eventually remove it
since we don't need it anymore after the removal of the global
gpio_descs array. This will again interfere with the numbering of GPIO
chips that do not have a base number provided.
Note that I don't really like this, either - but the problem is the
GPIO integer interface. Until everyone has upgraded to gpiod and we
have a replacement for the current sysfs interface (this will take a
while) we have to cope with this. This issue has been bothering users
for years, so this time I'd like to try and solve it the less ugly
way. If there is a better solution, of course I'm all for it.
I think the scheme will fail if you ever get gpio controllers that are
not part of the DT: We have hotpluggable devices (PCI, USB, ...) that
are not represented in DT and that may also provide GPIOs for internal
uses.
The current state of affairs is definitely problematic, but defining
the GPIO numbers in DT properties would only be a relative improvement,
not a solution, and I fear it would make it harder to change the kernel
to remove the gpio numbers eventually.
I wonder if we could instead come up with an approach that completely
randomizes the gpio numbers (as a compile-time option) to find any
places that still rely on specific numbers.
Arnd
Okay, if people think defining the GPIO base number in DT properties as
a temporary, transient solution is not acceptable, I can switch the
driver to use dynamic GPIO number allocation (by setting gpio base to a
negative number and let gpiochip_add find a usable base number).
Like I said previously, dynamic GPIO allocation works fine in the
kernel, as long as all of our GPIO clients in the kernel use gpiod based
API, which is what we will enforce going forward. The only problem is
with some of our customers who use GPIO through sysfs and expect fixed
global GPIO numbers. Thinking about this more, it's probably not that
difficult to add a script for those customers to convert/map the GPIO
numbers based on readings parsed from sysfs, so I guess that's fine.
I'll submit v6 patchset with DT property "linux,gpio-base" removed.
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
