[PATCH v2 0/4] Add pinctrl support to Broadcom Cygnus SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patchset contains the initial pinctrl support for the Broadcom Cygnus SoC.
The Cygnus pinctrl controller supports group based alternate function configuration

Changes from v1:
 - Fix a typo in device tree binding document

Ray Jui (4):
  pinctrl: Broadcom Cygnus pinctrl device tree binding
  pinctrl: cygnus: add initial pinctrl support
  ARM: mach-bcm: enable pinctrl support for Cygnus
  ARM: dts: enable pinctrl for Broadcom Cygnus

 .../bindings/pinctrl/brcm,cygnus-pinctrl.txt       |   92 +++
 arch/arm/boot/dts/bcm-cygnus.dtsi                  |    5 +
 arch/arm/mach-bcm/Kconfig                          |    1 +
 drivers/pinctrl/Kconfig                            |    7 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/pinctrl-bcm-cygnus.c               |  753 ++++++++++++++++++++
 6 files changed, 859 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinctrl.txt
 create mode 100644 drivers/pinctrl/pinctrl-bcm-cygnus.c

-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux