[PATCH 1/2] devicetree: add a binding for GPIOs going though a level shifter

[Alban Bedel <alban.bedel@xxxxxxxxxxxxxxxxx>]

Signed-off-by: Alban Bedel <alban.bedel@xxxxxxxxxxxxxxxxx>
---
 .../devicetree/bindings/gpio/gpio-level-shifter.txt       | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-level-shifter.txt

diff --git a/Documentation/devicetree/bindings/gpio/gpio-level-shifter.txt b/Documentation/devicetree/bindings/gpio/gpio-level-shifter.txt
new file mode 100644
index 0000000..e108c43
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-level-shifter.txt
@@ -0,0 +1,15 @@
+GPIO level shifter
+
+This binding allow supporting GPIOs going though a level shifter.
+
+Required properties:
+- compatible : should be "gpio-level-shifter"
+- data-gpios : list of the data GPIO phandles
+- #gpio-cells : should be 2
+- gpio-controller : marks the device node as a GPIO controller
+
+Optional properties:
+- enable-gpio : phandle of the GPIO that control the level shifter enable pin
+- direction-gpio : phandle of the GPIO that control the level shifter direction
+- vcca-supply : phandle of the regulator for side A of the level shifter
+- vccb-supply : phandle of the regulator for side B of the level shifter
-- 
2.1.3

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html