[Patch v2 0/2] gpio: add GPIO hogging mechanism

[Benoit Parrot <bparrot@xxxxxx>]

This patch set re-introduces the gpio hogging concept first 
presented by Boris Brezillion.
This patch set provides a way to initally configure specific GPIO
when the gpio controller is probed.

The actual DT scanning to collect the GPIO specific data is performed
as part of the gpiochip_add().

The purpose of this is to allows specific GPIOs to be configured
without any driver specific code.
This particularly useful because board design are getting
increasingly complex and given SoC pins can now have upward
of 10 mux values a lot of connections are now dependent on
external IO muxes to switch various modes and combination.

Specific drivers should not necessarily need to be aware of
what accounts to a specific board implementation. This board level
"description" should be best kept as part of the dts file.

Changes since v1:
 * Split the devicetree bindings documentation in its own patch.
 * Refactor the gpio-hog mechanism as private functions meant to
   be to invoked from of_gpiochip_add().

Benoit Parrot (2):
  gpio: add GPIO hogging mechanism
  gpio: Document GPIO hogging mechanism

 Documentation/devicetree/bindings/gpio/gpio.txt |  25 ++++
 drivers/gpio/gpiolib-of.c                       | 188 ++++++++++++++++++++++++
 2 files changed, 213 insertions(+)

-- 
1.8.5.1

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html