On Tue, Nov 18, 2014 at 03:49:55PM -0800, Doug Anderson wrote: > The rockchip pinctrl driver was using irq_gc_set_wake() as its > implementation of irq_set_wake() but was totally ignoring everything > that irq_gc_set_wake() did (which is to upkeep gc->wake_active). > > Let's fix that by setting gc->wake_active as GPIO_INTEN at suspend > time and restoring GPIO_INTEN at resume time. > > NOTE a few quirks when thinking about this patch: > - Rockchip pinctrl hardware supports both "disable/enable" and > "mask/unmask". Right now we only use "disable/enable" and present > those to Linux as "mask/unmask". This should be OK because > enable/disable is optional and Linux will implement it in terms of > mask/unmask. At the moment we always tell hardware all interrupts > are unmasked (the boot default). > - At suspend time Linux tries to call "disable" on all interrupts and > also enables wakeup on all wakeup interrupts. One would think that > since "disable" is implemented as "mask" when "disable" isn't > provided and that since we were ignoring gc->wake_active that > nothing would have woken us up. That's not the case since Linux > "optimizes" things and just leaves interrutps unmasked, assuming it > could mask them later when they go off. That meant that at suspend > time all interrupts were actually being left enabled. > > With this patch random non-wakeup interrupts no longer wake the system > up. Wakeup interrupts still wake the system up. > > Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx> Seems reasonable to me. Reviewed-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx> > --- > drivers/pinctrl/pinctrl-rockchip.c | 21 +++++++++++++++++++++ > 1 file changed, 21 insertions(+) > > diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c > index ba74f0a..e91e845 100644 > --- a/drivers/pinctrl/pinctrl-rockchip.c > +++ b/drivers/pinctrl/pinctrl-rockchip.c > @@ -89,6 +89,7 @@ struct rockchip_iomux { > * @reg_pull: optional separate register for additional pull settings > * @clk: clock of the gpio bank > * @irq: interrupt of the gpio bank > + * @saved_enables: Saved content of GPIO_INTEN at suspend time. > * @pin_base: first pin number > * @nr_pins: number of pins in this bank > * @name: name of the bank > @@ -107,6 +108,7 @@ struct rockchip_pin_bank { > struct regmap *regmap_pull; > struct clk *clk; > int irq; > + u32 saved_enables; > u32 pin_base; > u8 nr_pins; > char *name; > @@ -1543,6 +1545,23 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type) > return 0; > } > > +static void rockchip_irq_suspend(struct irq_data *d) > +{ > + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); > + struct rockchip_pin_bank *bank = gc->private; > + > + bank->saved_enables = irq_reg_readl(gc, GPIO_INTEN); > + irq_reg_writel(gc, gc->wake_active, GPIO_INTEN); > +} > + > +static void rockchip_irq_resume(struct irq_data *d) > +{ > + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); > + struct rockchip_pin_bank *bank = gc->private; > + > + irq_reg_writel(gc, bank->saved_enables, GPIO_INTEN); > +} > + > static int rockchip_interrupts_register(struct platform_device *pdev, > struct rockchip_pinctrl *info) > { > @@ -1587,6 +1606,8 @@ static int rockchip_interrupts_register(struct platform_device *pdev, > gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit; > gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit; > gc->chip_types[0].chip.irq_set_wake = irq_gc_set_wake; > + gc->chip_types[0].chip.irq_suspend = rockchip_irq_suspend; > + gc->chip_types[0].chip.irq_resume = rockchip_irq_resume; > gc->chip_types[0].chip.irq_set_type = rockchip_irq_set_type; > gc->wake_enabled = IRQ_MSK(bank->nr_pins); > > -- > 2.1.0.rc2.206.gedb03e5 > -- Dmitry -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html