The Rockchip pinctrl driver was only implementing the "mask" and "unmask" operations though the hardware actually has two distinct things: enable/disable and mask/unmask. It was implementing the "mask" operations as a hardware enable/disable and always leaving all interrupts unmasked. I believe that the old system had some downsides, specifically: - (Untested) if an interrupt went off while interrupts were "masked" it would be lost. Now it will be kept track of. - If someone wanted to change an interrupt back into a GPIO (is such a thing sensible?) by calling irq_disable() it wouldn't actually take effect. That's because Linux does some extra optimizations when there's no true "disable" function: it does a lazy mask. Let's actually implement enable/disable/mask/unmask properly. Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx> --- drivers/pinctrl/pinctrl-rockchip.c | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index e91e845..60d1a49 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -1562,6 +1562,28 @@ static void rockchip_irq_resume(struct irq_data *d) irq_reg_writel(gc, bank->saved_enables, GPIO_INTEN); } +static void rockchip_irq_disable(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + u32 val; + + irq_gc_lock(gc); + val = irq_reg_readl(gc, GPIO_INTEN); + irq_reg_writel(gc, val & ~d->mask, GPIO_INTEN); + irq_gc_unlock(gc); +} + +static void rockchip_irq_enable(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + u32 val; + + irq_gc_lock(gc); + val = irq_reg_readl(gc, GPIO_INTEN); + irq_reg_writel(gc, val | d->mask, GPIO_INTEN); + irq_gc_unlock(gc); +} + static int rockchip_interrupts_register(struct platform_device *pdev, struct rockchip_pinctrl *info) { @@ -1600,11 +1622,13 @@ static int rockchip_interrupts_register(struct platform_device *pdev, gc = irq_get_domain_generic_chip(bank->domain, 0); gc->reg_base = bank->reg_base; gc->private = bank; - gc->chip_types[0].regs.mask = GPIO_INTEN; + gc->chip_types[0].regs.mask = GPIO_INTMASK; gc->chip_types[0].regs.ack = GPIO_PORTS_EOI; gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit; - gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit; - gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit; + gc->chip_types[0].chip.irq_mask = irq_gc_mask_set_bit; + gc->chip_types[0].chip.irq_unmask = irq_gc_mask_clr_bit; + gc->chip_types[0].chip.irq_enable = rockchip_irq_enable; + gc->chip_types[0].chip.irq_disable = rockchip_irq_disable; gc->chip_types[0].chip.irq_set_wake = irq_gc_set_wake; gc->chip_types[0].chip.irq_suspend = rockchip_irq_suspend; gc->chip_types[0].chip.irq_resume = rockchip_irq_resume; -- 2.1.0.rc2.206.gedb03e5 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html