Re: [PATCH 01/15] mfd: add new driver for Sharp LoCoMo

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

2014-11-05 23:24 GMT+03:00 Mark Brown <broonie@xxxxxxxxxx>:
> On Thu, Nov 06, 2014 at 12:02:49AM +0400, Dmitry Eremin-Solenikov wrote:
>> 2014-11-03 16:41 GMT+03:00 Linus Walleij <linus.walleij@xxxxxxxxxx>:
>
>> > The point is still the same: no unrelated code in drivers/mfd,
>> > then either use IIO DAC as a middle layer or sink the DAC handling
>> > into respective subdriver, i.e. push it into the backlight or
>> > volume directly then.
>
>> The problem is that the DAC is equally used by backlight and by sound
>> device (WIP).
>> What about true i2c device driver sitting in drivers/misc and exporting a regmap
>> of 2 8-bit registers?
>
> If it can just export registers that sounds like a MFD.  If it needs to
> export functionality then like Linus says the IIO subsystem abstracts
> DACs.

I took a look at IIO subsystem. Thanks for the pointer. Indeed max517 driver
can drive m62332 DAC with minimal modifications. However write support
of the consumer interface is non-existing yet (which would be required
to support DACs in unified manner).

I'm actually looking at the regulator interface. Since this DAC serves mostly
like a (semi-)constant voltage interface, would it be rather logical to use
regulator subsystem to drive it?

-- 
With best wishes
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux