Re: [PATCH] mmc: core: fix card detection regression

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Kristina,

On Tue, Nov 4, 2014 at 10:22 PM, Kristina Martšenko
<kristina.martsenko@xxxxxxxxx> wrote:
> Since commit 89168b489915 ("mmc: core: restore detect line inversion
> semantics"), the SD card on i.MX28 (and possibly other) devices isn't
> detected and booting stops at:
>
> [    4.120617] Waiting for root device /dev/mmcblk0p3...
>
> This is caused by the MMC_CAP2_CD_ACTIVE_HIGH flag being set incorrectly
> when the host controller doesn't use a GPIO for card detection (but
> instead uses a dedicated pin). In this case mmc_gpiod_request_cd() will
> return before assigning to the gpio_invert variable, leaving the
> variable uninitialized. The variable then gets used to set the flag.
> This patch fixes the issue by making sure gpio_invert is set to false
> when a GPIO isn't used. After this patch, i.MX28 boots fine.
>
> The MMC_CAP2_RO_ACTIVE_HIGH (write protect) flag is also set incorrectly
> for the exact same reason (it uses the same uninitialized variable), so
> this patch fixes that too.
>
> Fixes: 89168b489915 ("mmc: core: restore detect line inversion semantics")
> Reported-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
> Signed-off-by: Kristina Martšenko <kristina.martsenko@xxxxxxxxx>

This fixes mx28 card detection, thanks!

Tested-by: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux