Re: [PATCH 2/2] PMIC / opregion: support PMIC customized operation region for CrystalCove

["Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>]

On Monday, October 13, 2014 05:02:13 PM Aaron Lu wrote:
> On Thu, Oct 09, 2014 at 05:21:28PM +0800, Aaron Lu wrote:
> > On 10/08/2014 04:05 PM, Lee Jones wrote:
> > > To all those CC'ed,
> > > 
> > >> The Baytrail-T platform firmware has defined two customized operation
> > >> regions for PMIC chip Crystal Cove - one is for power resource handling
> > >> and one is for thermal: sensor temperature reporting, trip point setting,
> > >> etc. This patch adds support for them on top of the existing Crystal Cove
> > >> PMIC driver.
> > >>
> > >> The reason to split code into a separate file intel_soc_pmic_opregion.c
> > >> is that there are more PMIC driver with ACPI operation region support
> > >> coming and we can re-use those code. The intel_soc_pmic_opregion_data
> > >> structure is created also for this purpose: when we need to support a
> > >> new PMIC's operation region, we just need to fill those callbacks and
> > >> the two register mapping tables.
> > >>
> > >> Signed-off-by: Aaron Lu <aaron.lu@xxxxxxxxx>
> > >> ---
> > >>  drivers/mfd/Kconfig                       |  11 +
> > >>  drivers/mfd/Makefile                      |   1 +
> > >>  drivers/mfd/intel_soc_pmic_crc.c          |   3 +
> > >>  drivers/mfd/intel_soc_pmic_crc_opregion.c | 229 +++++++++++++++++++
> > >>  drivers/mfd/intel_soc_pmic_opregion.c     | 350 ++++++++++++++++++++++++++++++
> > >>  drivers/mfd/intel_soc_pmic_opregion.h     |  35 +++
> > > 
> > > With the influx of new same-chip devices, I think the MFD subsystem is
> > > fast becoming overloaded.  I think all of the PMIC handling should in
> > > fact either live in Regulators or have its own subsystem.
> > > 
> > > Let's open this up to the floor by Cc'ing some probable interested
> > > parties.
> > 
> > The ACPI operation region handler provides implementation for the ASL
> > code written by firmware developer, and since the ACPI PMIC device node
> > has two customized operation regions: power rail handling and thermal
> > sensor manipulating, implementing the handler will inevitably touch
> > power rail registers and thermal registers of the PMIC chip. In this
> > regard, it doesn't fit what the MFD subsystem is meant to contain(
> > according to your comments, I didn't know this before, sorry about that).
> > 
> > It seems that we have two options:
> > 1 Create two cell devices from the PMIC I2C driver, one for power and
> >   one for thermal; the driver for the power part goes to drivers/power
> >   or drivers/regulator and the driver for thermal one goes to
> >   drivers/thermal;
> >   The problem of this approach is that, the operation region handler
> >   driver doesn't really need to expose those power or thermal sysfs
> >   interfaces for user space to consume, perhaps it shouldn't, as its
> >   sole purpose is to satisfy the ASL code access, not more.
> > 2 Move these operation region handler drivers to drivers/acpi
> >   We now have EC operation region handler driver there, but we also have
> >   I2C, GPIO, i915 operation region handlers in their own subsystems. Not
> >   sure if PMIC operation region handler qualifies there.
> 
> Rafael,
> 
> May I have your opinion on option 2? Do you think it is OK to place the
> operation region code under drivers/acpi? Thanks.

In my opinion, yes it is.  After all, operation regions are a mechanism by
which the AML interpreter can access hardware.

-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html