Re: [PATCH 1/2] gpio: Add driver for AXM55xx SSP chip selects

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> On Thu, Sep 4, 2014 at 7:06 PM, Mark Brown <broonie@xxxxxxxxxx> wrote:
>> On Thu, Sep 04, 2014 at 07:04:44PM +0200, Linus Walleij wrote:
>>> I need an ACK from Mark Brown on this before I apply.
>>> The driver seems to do what it should, but I need Mark to
>>> be OK with exporting the CS signals from an SSP/SPI block
>>> to be exposed to Linux as GPIOs.
>>>
>>> (Top-posting and quoting patch verbatim so Mark gets it.)
>>
>> I don't see any sort of reasoning for this?
>
> Maybe there was some earlier, but this is an excellent opportunity
> to repeat it... So Anders: why do you want to do this?
>

Well, the problem with adding this to the spi-pl022 driver (as a
vendor specific extension) is that this IP block unfortunately isn't
distinguishable from the standard ARM PL022 implementation (same
values in the PrimeCell identification registers). That's why I went
down the GPIO path...

/Anders
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux