Add an attribute 'wakeup' to the GPIO sysfs interface which allows marking/unmarking a GPIO as wake IRQ. The file 'wakeup' is created in each exported GPIOs directory, if an IRQ is associated with that GPIO and the irqchip implements set_wake(). Writing 'enabled' to that file will enable wake for that GPIO, while writing 'disabled' will disable wake. Reading that file will return either 'disabled' or 'enabled' depening on the currently set flag for the GPIO's IRQ. Signed-off-by: Soren Brinkmann <soren.brinkmann@xxxxxxxxxx> --- Hi all, I originally submitted this patch with a few fixes for Zynq's GPIO driver (https://lkml.org/lkml/2014/8/29/391). Since this change is not just Zynq-related and has broader impact, Linus asked me to post this again, separate from the Zynq series. Let me just quote myself from the original submission: "I'm still not fully convinced that the gpio_keys are the best replacement for the sysfs interface when it comes to inputs. For that reason and to have a way to do some quick wake testing, I'd like to propose adding the ability to control wake through the sysfs interface (patch 3)." Thanks, Sören drivers/gpio/gpiolib-sysfs.c | 75 ++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 69 insertions(+), 6 deletions(-) diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c index 5f2150b619a7..aaf021eaaff5 100644 --- a/drivers/gpio/gpiolib-sysfs.c +++ b/drivers/gpio/gpiolib-sysfs.c @@ -286,6 +286,56 @@ found: static DEVICE_ATTR(edge, 0644, gpio_edge_show, gpio_edge_store); +static ssize_t gpio_wakeup_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + ssize_t status; + const struct gpio_desc *desc = dev_get_drvdata(dev); + int irq = gpiod_to_irq(desc); + struct irq_desc *irq_desc = irq_to_desc(irq); + + mutex_lock(&sysfs_lock); + + if (irqd_is_wakeup_set(&irq_desc->irq_data)) + status = sprintf(buf, "enabled\n"); + else + status = sprintf(buf, "disabled\n"); + + mutex_unlock(&sysfs_lock); + + return status; +} + +static ssize_t gpio_wakeup_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + int ret; + unsigned int on; + struct gpio_desc *desc = dev_get_drvdata(dev); + int irq = gpiod_to_irq(desc); + + mutex_lock(&sysfs_lock); + + if (sysfs_streq("enabled", buf)) + on = true; + else if (sysfs_streq("disabled", buf)) + on = false; + else + return -EINVAL; + + ret = irq_set_irq_wake(irq, on); + + mutex_unlock(&sysfs_lock); + + if (ret) + pr_warn("%s: failed to %s wake\n", __func__, + on ? "enable" : "disable"); + + return size; +} + +static DEVICE_ATTR(wakeup, 0644, gpio_wakeup_show, gpio_wakeup_store); + static int sysfs_set_active_low(struct gpio_desc *desc, struct device *dev, int value) { @@ -526,7 +576,7 @@ static struct class gpio_class = { int gpiod_export(struct gpio_desc *desc, bool direction_may_change) { unsigned long flags; - int status; + int status, irq; const char *ioname = NULL; struct device *dev; int offset; @@ -582,11 +632,24 @@ int gpiod_export(struct gpio_desc *desc, bool direction_may_change) goto fail_unregister_device; } - if (gpiod_to_irq(desc) >= 0 && (direction_may_change || - !test_bit(FLAG_IS_OUT, &desc->flags))) { - status = device_create_file(dev, &dev_attr_edge); - if (status) - goto fail_unregister_device; + irq = gpiod_to_irq(desc); + if (irq >= 0) { + struct irq_desc *irq_desc = irq_to_desc(irq); + struct irq_chip *irqchip = irq_desc_get_chip(irq_desc); + + if (direction_may_change || + !test_bit(FLAG_IS_OUT, &desc->flags)) { + status = device_create_file(dev, &dev_attr_edge); + if (status) + goto fail_unregister_device; + } + + if (irqchip->flags & IRQCHIP_SKIP_SET_WAKE || + irqchip->irq_set_wake) { + status = device_create_file(dev, &dev_attr_wakeup); + if (status) + goto fail_unregister_device; + } } set_bit(FLAG_EXPORT, &desc->flags); -- 2.1.0.1.g27b9230 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html