Re: [PATCH v2 1/3] mfd: add support for Diolan DLN-2 devices

[Lee Jones <lee.jones@xxxxxxxxxx>]

On Mon, 01 Sep 2014, Octavian Purdila wrote:

> On Mon, Sep 1, 2014 at 11:37 AM, Lee Jones <lee.jones@xxxxxxxxxx> wrote:
> > On Sat, 30 Aug 2014, Octavian Purdila wrote:
> >
> >> This patch implements the USB part of the Diolan USB-I2C/SPI/GPIO
> >> Master Adapter DLN-2. Details about the device can be found here:
> >>
> >> https://www.diolan.com/i2c/i2c_interface.html.
> >>
> >> Information about the USB protocol can be found in the Programmer's
> >> Reference Manual [1], see section 1.7.
> >>
> >> Because the hardware has a single transmit endpoint and a single
> >> receive endpoint the communication between the various DLN2 drivers
> >> and the hardware will be muxed/demuxed by this driver.
> >>
> >> Each DLN2 module will be identified by the handle field within the DLN2
> >> message header. If a DLN2 module issues multiple commands in parallel
> >> they will be identified by the echo counter field in the message header.
> >>
> >> The DLN2 modules can use the dln2_transfer() function to issue a
> >> command and wait for its response. They can also register a callback
> >> that is going to be called when a specific event id is generated by
> >> the device (e.g. GPIO interrupts). The device uses handle 0 for
> >> sending events.
> >>
> >> [1] https://www.diolan.com/downloads/dln-api-manual.pdf
> >
> > MFD is not a dumping ground for misfit h/w.  Almost all of this code
> > looks like it belongs in drivers/usb.  Please move it there.
> >
> 
> We initially submitted this driver as a pure USB driver, with our own
> module registration mechanism, but during the first round of reviews
> people pointed out that a MFD driver is the better approach, and I
> agree. I also see that there are already a couple of USB drivers
> implemented as MFD drivers.

Can you link me to your previous submission please?

> Do you see a better approach?

You should have a small MFD driver which controls resources and
registers children.  All other functionality should live in their
respective drivers/X locations i.e. USB functionallity should normally
live in drivers/usb.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html