Re: [PATCH 4/4] ARM: dts: keystone-k2hk: add dsp gpio controllers nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thu, 14 Aug 2014 18:57:08 +0300 от Grygorii Strashko <grygorii.strashko@xxxxxx>:
...
> >>>> +		dspgpio7: keystone_dsp_gpio@262025C {
> >>>> +			compatible = "ti,keystone-mctrl-gpio";
> >>>> +			gpio-controller;
> >>>> +			#gpio-cells = <2>;
> >>>> +			gpio,syscon-dev = <&devctrl 0x25c>;
> >>>> +		};
> >>>
> >>> So, devctrl is a syscon device and this DTS introduce several
> >>> identical GPIO descriptions?
> >>>
> >>> On my opinion this should be placed in the gpio-syscon.c,
> >>> where you can add support for ti,keystone-dsp0{..7}-gpio.
> >>> Such change will avoid parts 2 and 3 of this patch.
> >>>
> >>> static const struct syscon_gpio_data ti_keystone_dsp0_gpio = {
> >>>     .compatible = "ti,keystone-syscon",
> >>>     .dat_bit_offset = 0x240 * 8,
> >>>     ...
> >>>     .set = etc...
> >>> };
> >>
> >> So, if I understand you right, you propose to add 8 additional compatible
> >> strings just to encode different register offsets. Is it?
> >> 1) add "ti,keystone-mctrl-gpio0"..."ti,keystone-mctrl-gpio7"
> > 
> > Yes, but replace "mctrl" with "dsp" since mctrl is not applicable here.
> > 
> >> 2) add 8 structures keystone_mctrl_gpio0..keystone_mctrl_gpio7 in gpio-syscon.c
> >>     (which will have only different values of field - .dat_bit_offset = 0x2yy * 8,)
> >>
> >> 3) add 8 additional items in array syscon_gpio_ids
> >> 	{
> >> 		.compatible	= "ti,keystone-mctrl-gpio0",
> >> 		.data		= &keystone_mctrl_gpio0,
> >> 	}, ...
> >>
> >> I can do it if you strictly insist, BUT I don't like it :(
> >> - just imagine how your driver will look look like if 5 or 6 SoCs will re-use it ;)
> >> - as I mentioned in cover letter and commit messages even each SoC revision can have
> >>    different Syscon implementation with different registers offsets and with different
> >>    number of Syscon register ranges (for example for Keystone 2 we already have two
> >>    Syscon devices defined in DT).
> > 
> > The initial version of this driver contains addresses and offsets in, but this approach has
> > been criticized by DT maintainers.
> 
> Could you provide link on this thread^, pls?

Here is a link to first version:
https://www.mail-archive.com/linux-gpio@xxxxxxxxxxxxxxx/msg01616.html

Unfortunately, I lost thread for DT-related stuffs.

---

��.n��������+%������w��{.n�����{��
b���ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f





[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux