Hi Linus,
here is the bulk of the pin control changes for v3.17. I intended to
send the GPIO tree first, but it needs some icing on top to I need
to have it boiled in linux-next another night.
The information is in the tag as usual. I test-merged this branch
without problems on your master so it should be painless. Some
minor transient warnings from ignored return values may appear
on obscure drivers until the merge of the patch removing the
__must_check attribute from the gpiochip_remove() function appear
from the GPIO trees. Sorry for that, but would be unwise to rebase
the tree for that warning alone.
Please pull this in!
Yours,
Linus Walleij
The following changes since commit 7171511eaec5bf23fb06078f59784a3a0626b38f:
Linux 3.16-rc1 (2014-06-15 17:45:28 -1000)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git
tags/pinctrl-v3.17-1
for you to fetch changes up to e1ee5c578fb1fa24b7ccaf1a11237a2bd70b6f9a:
pinctrl: baytrail: Convert to use gpiolib irqchip (2014-07-28 12:21:00 +0200)
----------------------------------------------------------------
This is the bulk pin control changes for the v3.17 merge
development cycle:
- Get rid of the .disable() callback from the driver callback
vtable. This callback was abused and counterintuitive since
a pin or group of pins can be said to always be in some
setting, and never really disabled. We now only enable a
certain muxing, and move between some certain muxings, we
never "disable" a mux setting.
- Some janitorial moving the MSM, Samsung and Nomadik and
drivers to their own subdirectories for a clearer view in
the subsystem. This will continue.
- Kill off the use of the return value from gpiochip_remove(),
this will be done in parallel in the GPIO subsystem and
hopefully not trigger too many unchecked return value
warnings before we get rid of this altogether.
- A huge set of changes and improvements to the Allwinner
sunxi drivers especially for their latest A23 and A31 SoCs,
and some ground work for the new sun8i platform family.
- A large set of Rockchip driver improvements adding support
for the RK3288 SoC.
- Advances in migration of older Freescale platforms to pin
control, especially i.MX1.
- Samsung and Exynos improvements.
- Support for the Qualcomm MSM8960 SoC.
- Use the gpiolib irqchip helpers for the ST SPEAr and
Intel Baytrail drivers.
- A bunch of nice janitorial work done with cppcheck.
----------------------------------------------------------------
Alexander Shiyan (3):
pinctrl: Add i.MX1 pincontrol driver
pinctrl: i.MX27: Remove unused structure definition
pinctrl: i.MX27: Remove nonexistent pad definitions
Andrey Utkin (1):
pinctrl: msm: drop negativity check on unsigned value
Andy Gross (1):
pinctrl: qcom: Add BUS_HOLD pin bias
Bjorn Andersson (2):
pinctrl: msm: Add msm8960 definitions
pinctrl: qcom: Make muxing of gpio function explicit
Chen-Yu Tsai (7):
pinctrl: sunxi: Add IRQCHIP_SKIP_SET_WAKE flag for pinctrl irq chip
pinctrl: sunxi: Fix multi bank interrupt support in gpio_to_irq
pinctrl: sunxi: Remove gpio_out function from sun5i-a13 PG0/1/2 pins
pinctrl: sunxi: Add A23 PIO controller support
pinctrl: sunxi: Add A23 R_PIO controller support
pinctrl: sunxi: use gpiolib API to mark a GPIO used as an IRQ
pinctrl: sunxi: number gpio ranges starting from 0
David PARIS (1):
pinctrl: st: add IRQCHIP_SKIP_SET_WAKE flag
Eric Ernst (1):
pinctrl: baytrail: Warn if direct IRQ GPIO set to output
Fan Wu (1):
pinctrl: avoid duplicated calling enable_pinmux_setting for a pin
Geert Uytterhoeven (1):
sh-pfc: Add renesas,pfc-r8a7791 to binding documentation
Hans de Goede (3):
pinctrl: sunxi: Move setting of mux to irq type
pinctrl: sunxi: Properly handle level triggered gpio interrupts
pinctrl: sunxi: Define enable / disable irq callbacks
Heiko Stübner (9):
pinctrl: rockchip: generalize bank-quirks
pinctrl: rockchip: precalculate iomux offsets
pinctrl: rockchip: add support for 4bit wide iomux settings
pinctrl: rockchip: enable iomuxes from pmu space
pinctrl: rockchip: support unrouted iomuxes per bank
pinctrl: rockchip: add support for rk3288 pin-controller
pinctrl: rockchip: set is_generic in pinconf_ops
pinctrl: rockchip: add separate type for rk3288
pinctrl: rockchip: add drive-strength control for rk3288
Himangi Saraogi (1):
sh-pfc: sh73a0: Introduce the use of devm_regulator_register
Linus Walleij (3):
pinctrl: spear: switch plgpio to irqchip helpers
pinctrl: msm: move all qualcomm drivers to subdir
pinctrl: nomadik: move all Nomadik drivers to subdir
Maxime Ripard (6):
pinctrl: sunxi: Remove irq_mask_ack and use irq_ack instead
pinctrl: sunxi: Add macro definition for pinctrl with more than
one interrupt
pinctrl: sunxi: Declare the number of interrupt banks in the descriptor
pinctrl: sunxi: Declare the interrupt function for the A31
pinctrl: sunxi: Implement multiple interrupt banks support
pinctrl: sunxi: Remove PINCTRL_SUNXI
Mika Westerberg (1):
pinctrl: baytrail: Convert to use gpiolib irqchip
Nobuhiro Iwamatsu (1):
pinctrl: sh-pfc: r8a7791: Add HSCIF pin support
Rickard Strandqvist (9):
pinctrl: pinctrl-at91.c: Cleaning up if unsigned is less than zero
pinctrl: pinctrl-imx.c: Cleaning up if unsigned is less than zero
pinctrl: pinctrl-imx1-core.c: Cleaning up if unsigned is less than zero
pinctrl: pinctrl-st.c: Cleaning up if unsigned is less than zero
pinctrl: pinctrl-at91.c: Cleaning up values that are never used
pinctrl: pinctrl-single.c: Cleaning up values that are never used
pinctrl: pinctrl-adi2.c: Cleaning up wrong format string usage
pinctrl: pinctrl-single.c: Cleaning up wrong format string usage
pinctrl: pinctrl-st.c: Cleaning up values that are never used
Sachin Kamat (2):
pinctrl: bcm281xx: Staticize bcm281xx_pinctrl_probe
pinctrl: samsung: Group all drivers in a sub-dir
Sergei Shtylyov (1):
sh-pfc: r8a7791: add CAN pin groups
Tomasz Figa (5):
pinctrl: samsung: Decouple direction setting from pinctrl
pinctrl: samsung: Handle GPIO request and free using pinctrl helpers
pinctrl: exynos: Consolidate irq_chips of GPIO and WKUP EINTs
pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes
pinctrl: samsung: Allow pin value to be initialized using pinfunc
Uwe Kleine-König (1):
pinctrl: hide CONFIG_PINMUX and CONFIG_PINCONF
abdoulaye berthe (1):
pinctrl: remove all usage of gpio_remove ret val in driver/pinctl
.../bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 2 +
.../bindings/pinctrl/qcom,apq8064-pinctrl.txt | 2 +-
.../bindings/pinctrl/qcom,ipq8064-pinctrl.txt | 2 +-
.../bindings/pinctrl/qcom,msm8960-pinctrl.txt | 181 +++
.../bindings/pinctrl/qcom,msm8974-pinctrl.txt | 2 +-
.../bindings/pinctrl/renesas,pfc-pinctrl.txt | 1 +
.../bindings/pinctrl/rockchip,pinctrl.txt | 4 +-
.../bindings/pinctrl/samsung-pinctrl.txt | 24 +-
arch/arm/boot/dts/imx27-pinfunc.h | 46 -
arch/arm/mach-sunxi/Kconfig | 1 -
drivers/pinctrl/Kconfig | 117 +-
drivers/pinctrl/Makefile | 24 +-
drivers/pinctrl/core.c | 24 +-
drivers/pinctrl/nomadik/Kconfig | 51 +
drivers/pinctrl/nomadik/Makefile | 10 +
drivers/pinctrl/{ => nomadik}/pinctrl-ab8500.c | 0
drivers/pinctrl/{ => nomadik}/pinctrl-ab8505.c | 0
drivers/pinctrl/{ => nomadik}/pinctrl-ab8540.c | 0
drivers/pinctrl/{ => nomadik}/pinctrl-ab9540.c | 0
drivers/pinctrl/{ => nomadik}/pinctrl-abx500.c | 19 +-
drivers/pinctrl/{ => nomadik}/pinctrl-abx500.h | 0
.../pinctrl/{ => nomadik}/pinctrl-nomadik-db8500.c | 0
.../pinctrl/{ => nomadik}/pinctrl-nomadik-db8540.c | 0
.../{ => nomadik}/pinctrl-nomadik-stn8815.c | 0
drivers/pinctrl/{ => nomadik}/pinctrl-nomadik.c | 18 +-
drivers/pinctrl/{ => nomadik}/pinctrl-nomadik.h | 0
drivers/pinctrl/pinctrl-adi2.c | 41 +-
drivers/pinctrl/pinctrl-as3722.c | 11 +-
drivers/pinctrl/pinctrl-at91.c | 27 +-
drivers/pinctrl/pinctrl-baytrail.c | 103 +-
drivers/pinctrl/pinctrl-bcm281xx.c | 2 +-
drivers/pinctrl/pinctrl-bcm2835.c | 11 -
drivers/pinctrl/pinctrl-coh901.c | 10 +-
drivers/pinctrl/pinctrl-imx.c | 2 +-
drivers/pinctrl/pinctrl-imx1-core.c | 2 +-
drivers/pinctrl/pinctrl-imx1.c | 279 +++++
drivers/pinctrl/pinctrl-imx27.c | 52 -
drivers/pinctrl/pinctrl-rockchip.c | 401 ++++--
drivers/pinctrl/pinctrl-single.c | 61 +-
drivers/pinctrl/pinctrl-st.c | 15 +-
drivers/pinctrl/pinctrl-tb10x.c | 17 -
drivers/pinctrl/pinctrl-tegra.c | 13 -
drivers/pinctrl/pinctrl-tz1090-pdc.c | 28 -
drivers/pinctrl/pinctrl-tz1090.c | 58 -
drivers/pinctrl/pinctrl-u300.c | 14 -
drivers/pinctrl/pinmux.c | 4 -
drivers/pinctrl/qcom/Kconfig | 42 +
drivers/pinctrl/qcom/Makefile | 6 +
drivers/pinctrl/{ => qcom}/pinctrl-apq8064.c | 19 +-
drivers/pinctrl/{ => qcom}/pinctrl-ipq8064.c | 17 +-
drivers/pinctrl/{ => qcom}/pinctrl-msm.c | 42 +-
drivers/pinctrl/{ => qcom}/pinctrl-msm.h | 0
drivers/pinctrl/qcom/pinctrl-msm8960.c | 1282 ++++++++++++++++++++
drivers/pinctrl/{ => qcom}/pinctrl-msm8x74.c | 29 +-
drivers/pinctrl/samsung/Kconfig | 28 +
drivers/pinctrl/samsung/Makefile | 7 +
drivers/pinctrl/{ => samsung}/pinctrl-exynos.c | 307 +----
drivers/pinctrl/{ => samsung}/pinctrl-exynos.h | 0
drivers/pinctrl/{ => samsung}/pinctrl-exynos5440.c | 10 +-
drivers/pinctrl/{ => samsung}/pinctrl-s3c24xx.c | 0
drivers/pinctrl/{ => samsung}/pinctrl-s3c64xx.c | 0
drivers/pinctrl/{ => samsung}/pinctrl-samsung.c | 728 ++++++-----
drivers/pinctrl/{ => samsung}/pinctrl-samsung.h | 18 +-
drivers/pinctrl/sh-pfc/gpio.c | 9 +-
drivers/pinctrl/sh-pfc/pfc-r8a7791.c | 417 +++++++
drivers/pinctrl/sh-pfc/pfc-sh73a0.c | 11 +-
drivers/pinctrl/sh-pfc/pinctrl.c | 22 -
drivers/pinctrl/sirf/pinctrl-sirf.c | 10 -
drivers/pinctrl/spear/Kconfig | 1 +
drivers/pinctrl/spear/pinctrl-plgpio.c | 84 +-
drivers/pinctrl/spear/pinctrl-spear.c | 7 -
drivers/pinctrl/sunxi/Kconfig | 24 +-
drivers/pinctrl/sunxi/Makefile | 2 +
drivers/pinctrl/sunxi/pinctrl-sun4i-a10.c | 1 +
drivers/pinctrl/sunxi/pinctrl-sun5i-a10s.c | 1 +
drivers/pinctrl/sunxi/pinctrl-sun5i-a13.c | 4 +-
drivers/pinctrl/sunxi/pinctrl-sun6i-a31-r.c | 1 +
drivers/pinctrl/sunxi/pinctrl-sun6i-a31.c | 217 ++--
drivers/pinctrl/sunxi/pinctrl-sun7i-a20.c | 1 +
drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c | 142 +++
drivers/pinctrl/sunxi/pinctrl-sun8i-a23.c | 593 +++++++++
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 187 ++-
drivers/pinctrl/sunxi/pinctrl-sunxi.h | 44 +-
drivers/pinctrl/vt8500/pinctrl-wmt.c | 21 +-
include/linux/pinctrl/pinmux.h | 2 -
85 files changed, 4411 insertions(+), 1604 deletions(-)
create mode 100644
Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt
create mode 100644 drivers/pinctrl/nomadik/Kconfig
create mode 100644 drivers/pinctrl/nomadik/Makefile
rename drivers/pinctrl/{ => nomadik}/pinctrl-ab8500.c (100%)
rename drivers/pinctrl/{ => nomadik}/pinctrl-ab8505.c (100%)
rename drivers/pinctrl/{ => nomadik}/pinctrl-ab8540.c (100%)
rename drivers/pinctrl/{ => nomadik}/pinctrl-ab9540.c (100%)
rename drivers/pinctrl/{ => nomadik}/pinctrl-abx500.c (98%)
rename drivers/pinctrl/{ => nomadik}/pinctrl-abx500.h (100%)
rename drivers/pinctrl/{ => nomadik}/pinctrl-nomadik-db8500.c (100%)
rename drivers/pinctrl/{ => nomadik}/pinctrl-nomadik-db8540.c (100%)
rename drivers/pinctrl/{ => nomadik}/pinctrl-nomadik-stn8815.c (100%)
rename drivers/pinctrl/{ => nomadik}/pinctrl-nomadik.c (99%)
rename drivers/pinctrl/{ => nomadik}/pinctrl-nomadik.h (100%)
create mode 100644 drivers/pinctrl/pinctrl-imx1.c
create mode 100644 drivers/pinctrl/qcom/Kconfig
create mode 100644 drivers/pinctrl/qcom/Makefile
rename drivers/pinctrl/{ => qcom}/pinctrl-apq8064.c (95%)
rename drivers/pinctrl/{ => qcom}/pinctrl-ipq8064.c (95%)
rename drivers/pinctrl/{ => qcom}/pinctrl-msm.c (96%)
rename drivers/pinctrl/{ => qcom}/pinctrl-msm.h (100%)
create mode 100644 drivers/pinctrl/qcom/pinctrl-msm8960.c
rename drivers/pinctrl/{ => qcom}/pinctrl-msm8x74.c (95%)
create mode 100644 drivers/pinctrl/samsung/Kconfig
create mode 100644 drivers/pinctrl/samsung/Makefile
rename drivers/pinctrl/{ => samsung}/pinctrl-exynos.c (79%)
rename drivers/pinctrl/{ => samsung}/pinctrl-exynos.h (100%)
rename drivers/pinctrl/{ => samsung}/pinctrl-exynos5440.c (99%)
rename drivers/pinctrl/{ => samsung}/pinctrl-s3c24xx.c (100%)
rename drivers/pinctrl/{ => samsung}/pinctrl-s3c64xx.c (100%)
rename drivers/pinctrl/{ => samsung}/pinctrl-samsung.c (71%)
rename drivers/pinctrl/{ => samsung}/pinctrl-samsung.h (93%)
create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c
create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun8i-a23.c
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
[GIT PULL] pin control bulk changes for the v3.17 cycle
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: [GIT PULL] pin control bulk changes for the v3.17 cycle
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Date: Thu, 7 Aug 2014 12:23:17 +0200
- Prev by Date: Re: [PATCH] MAINTAINERS: update GPIO include files
- Next by Date: [GIT PULL] GPIO bulk changes for v3.17
- Previous by thread: [PATCH] drivers/gpio: Check return value to silence warning
- Next by thread: [GIT PULL] GPIO bulk changes for v3.17
- Index(es):
 |