On Wednesday 23 July 2014 08:14 PM, Grygorii Strashko wrote:
(...)
+
+Required Properties:
+- compatible: should be "ti,keystone-dsp-gpio"
+
+- ti,syscon-dev : phandle/offset pair. The phandle to syscon used to
+ access device state control registers and the offset
+ in order to use block of device's specific registers.
+
+- gpio-controller : Marks the device node as a gpio controller.
+
+- #gpio-cells : Should be one.
+ See gpio.txt in this directory for a of the cells format
+
proper indentation for all the properties...
+Please refer to gpio.txt in this directory for details of the common GPIO
+bindings used by client devices.
+
+Example:
+ dspgpio0: keystone_dsp_gpio@02620240 {
+ compatible = "ti,keystone-dsp-gpio";
+ ti,syscon-dev = <&devctrl 0x240>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ dsp0: dsp0 {
+ compatible = "linux,rproc-user";
+ ...
+ kick-gpio = <&dspgpio0 27>;
+ };
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 4a1b511..990871f 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -158,6 +158,14 @@ config GPIO_EP93XX
depends on ARCH_EP93XX
select GPIO_GENERIC
+config GPIO_KEYSTONE_DSP
+ tristate "Keystone DSP GPIO support"
+ depends on ARCH_KEYSTONE
+ help
+ Say yes here to support the DSP GPIO driver for Keystone 2. This defines
+ up to 28 GPIOs per each Remote (DSP) core. This is used to send
+ signals from ARM to the Remote (DSP) core.
+
config GPIO_ZEVIO
bool "LSI ZEVIO SoC memory mapped GPIOs"
depends on ARM && OF_GPIO
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index d10f6a9..15c3389 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_GPIO_IOP) += gpio-iop.o
obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o
+obj-$(CONFIG_GPIO_KEYSTONE_DSP) += gpio-keystone.o
obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o
obj-$(CONFIG_GPIO_INTEL_MID) += gpio-intel-mid.o
obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o
diff --git a/drivers/gpio/gpio-keystone.c b/drivers/gpio/gpio-keystone.c
new file mode 100644
index 0000000..7909a1c
--- /dev/null
+++ b/drivers/gpio/gpio-keystone.c
@@ -0,0 +1,138 @@
+/*
+ * Keystone 2 DSP GPIO support.
+ *
+ * Copyright (C) 2014 Texas Instruments, Inc.
+ * Author: Murali Karicheri <m-karicheri2@xxxxxx>
+ * Grygorii Strashko <grygorii.strashko@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
includes in alphabetical order..
+/* 28 bits in IPCGRx are treated as GPIO pins to generate interrupt */
+#define GPIOS_PER_BANK 28
+#define GPIO_OFFSET 4
+
+struct keystone_gpio_bank {
+ struct gpio_chip chip;
+ struct device *dev;
+ struct regmap *devctrl_regs;
+ u32 devctrl_offset;
+};
+#define chip_to_bank(c) \
+ container_of(c, struct keystone_gpio_bank, chip)
+
+static int keystone_gpio_direction_out(struct gpio_chip *c,
+ unsigned ofs, int val)
+{
+ return 0;
+}
+
+static int keystone_gpio_get(struct gpio_chip *c, unsigned ofs)
+{
+ struct keystone_gpio_bank *bank = chip_to_bank(c);
+ int bit = ofs + GPIO_OFFSET;
+ int ret;
+ u32 val = 0;
+
+ ret = regmap_read(bank->devctrl_regs, bank->devctrl_offset, &val);
+ if (ret < 0)
+ dev_dbg(bank->dev, "gpio read failed ret(%d)\n", ret);
If this read fails what will happen...?
we will get the debug message and return (val >> bit) & 1, But this val can be garbage or zero...?
+
+ return (val >> bit) & 1;
+}
--
-Varka Bhadram
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
