Re: [PATCH v2 1/3] gpio: Add APM X-Gene SoC GPIO controller support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jun 5, 2014 at 10:04 PM, Alexandre Courbot <gnurou@xxxxxxxxx> wrote:
> On Fri, May 30, 2014 at 4:23 AM, Feng Kan <fkan@xxxxxxx> wrote:
>> Add APM X-Gene SoC gpio controller driver.
>>
>> Signed-off-by: Feng Kan <fkan@xxxxxxx>
>> ---
>>  drivers/gpio/Kconfig      |   9 ++
>>  drivers/gpio/Makefile     |   1 +
>>  drivers/gpio/gpio-xgene.c | 231 ++++++++++++++++++++++++++++++++++++++++++++++
>>  3 files changed, 241 insertions(+)
>>  create mode 100644 drivers/gpio/gpio-xgene.c
>>
>> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
>> index a86c49a..9a15983 100644
>> --- a/drivers/gpio/Kconfig
>> +++ b/drivers/gpio/Kconfig
>> @@ -324,6 +324,15 @@ config GPIO_TZ1090_PDC
>>         help
>>           Say yes here to support Toumaz Xenif TZ1090 PDC GPIOs.
>>
>> +config GPIO_XGENE
>> +       bool "APM X-Gene GPIO controller support"
>> +       depends on ARM64 && OF_GPIO
>> +       help
>> +         This driver is to support the GPIO block within the APM X-Gene SoC
>> +         platform's generic flash controller. The GPIO pins are muxed with
>> +         the generic flash controller's address and data pins. Say yes
>> +         here to enable the GFC GPIO functionality.
>> +
>>  config GPIO_XILINX
>>         bool "Xilinx GPIO support"
>>         depends on PPC_OF || MICROBLAZE || ARCH_ZYNQ
>> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
>> index 6309aff..f0f2830 100644
>> --- a/drivers/gpio/Makefile
>> +++ b/drivers/gpio/Makefile
>> @@ -98,6 +98,7 @@ obj-$(CONFIG_GPIO_VX855)      += gpio-vx855.o
>>  obj-$(CONFIG_GPIO_WM831X)      += gpio-wm831x.o
>>  obj-$(CONFIG_GPIO_WM8350)      += gpio-wm8350.o
>>  obj-$(CONFIG_GPIO_WM8994)      += gpio-wm8994.o
>> +obj-$(CONFIG_GPIO_XGENE)       += gpio-xgene.o
>>  obj-$(CONFIG_GPIO_XILINX)      += gpio-xilinx.o
>>  obj-$(CONFIG_GPIO_XTENSA)      += gpio-xtensa.o
>>  obj-$(CONFIG_GPIO_ZEVIO)       += gpio-zevio.o
>> diff --git a/drivers/gpio/gpio-xgene.c b/drivers/gpio/gpio-xgene.c
>> new file mode 100644
>> index 0000000..a542f76
>> --- /dev/null
>> +++ b/drivers/gpio/gpio-xgene.c
>> @@ -0,0 +1,231 @@
>> +/*
>> + * AppliedMicro X-Gene SoC GPIO Driver
>> + *
>> + * Copyright (c) 2014, Applied Micro Circuits Corporation
>> + * Author: Feng Kan <fkan@xxxxxxx>.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program.  If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/kernel.h>
>> +#include <linux/init.h>
>> +#include <linux/io.h>
>> +#include <linux/spinlock.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/of_gpio.h>
>> +#include <linux/of.h>
>> +#include <linux/gpio.h>
>> +#include <linux/types.h>
>> +#include <linux/slab.h>
>> +#include <linux/clk.h>
>> +#include <linux/bitops.h>
>> +
>> +#define GPIO_SET_MASK(x)       BIT(x + 16)
>> +
>> +#define GPIO_SET_DR_OFFSET     0x00
>> +#define GPIO_DATA_OFFSET       0x08
>> +
>> +#define XGENE_MAX_GPIO_PER_BANK        16
>> +
>> +struct xgene_gpio;
>> +
>> +struct xgene_gpio {
>> +       struct  device          *dev;
>> +       struct xgene_gpio_bank  *banks;
>
> I am not seeing this member being used at all in your driver, apart
> from being kzalloc'd.
>
>> +       struct gpio_chip        chip;
>> +       void __iomem            *base;
>> +       spinlock_t              lock;
>> +#ifdef CONFIG_PM
>> +       u32                     set_dr_val;
>> +       u32                     od_val;
>> +#endif
>> +};
>> +
>> +static inline struct xgene_gpio *to_xgene_gpio(struct gpio_chip *chip)
>> +{
>> +       return container_of(chip, struct xgene_gpio, chip);
>> +}
>> +
>> +static int xgene_gpio_get(struct gpio_chip *gc, unsigned int offset)
>> +{
>> +       struct xgene_gpio *bank = to_xgene_gpio(gc);
>> +
>> +       return !!(ioread32(bank->base + GPIO_DATA_OFFSET) & BIT(offset));
>> +}
>> +
>> +static void xgene_gpio_set(struct gpio_chip *gc, unsigned int offset, int val)
>> +{
>> +       struct xgene_gpio *bank = to_xgene_gpio(gc);
>> +       unsigned long flags;
>> +       u32 setval;
>> +
>> +       spin_lock_irqsave(&bank->lock, flags);
>> +
>> +       setval = ioread32(bank->base + GPIO_SET_DR_OFFSET);
>> +       if (val)
>> +               setval |= GPIO_SET_MASK(offset);
>> +       else
>> +               setval &= ~GPIO_SET_MASK(offset);
>
> Let's use __set_bit and __clear_bit here and everywhere it applies.
This is a bit of issue on arm64, where the op for set_bit requires
unsigned long.
Any suggestions?

>
>> +       iowrite32(setval, bank->base + GPIO_SET_DR_OFFSET);
>> +
>> +       spin_unlock_irqrestore(&bank->lock, flags);
>> +}
>> +
>> +static int xgene_gpio_dir_in(struct gpio_chip *gc, unsigned int offset)
>> +{
>> +       struct xgene_gpio *bank = to_xgene_gpio(gc);
>> +       unsigned long flags;
>> +       u32 dirval;
>> +
>> +       spin_lock_irqsave(&bank->lock, flags);
>> +
>> +       dirval = ioread32(bank->base + GPIO_SET_DR_OFFSET);
>> +       dirval |= BIT(offset);
>> +       iowrite32(dirval, bank->base + GPIO_SET_DR_OFFSET);
>> +
>> +       spin_unlock_irqrestore(&bank->lock, flags);
>> +
>> +       return 0;
>> +}
>> +
>> +static int xgene_gpio_dir_out(struct gpio_chip *gc,
>> +                                       unsigned int offset, int val)
>> +{
>> +       struct xgene_gpio *bank = to_xgene_gpio(gc);
>> +       unsigned long flags;
>> +       u32 dirval;
>> +
>> +       spin_lock_irqsave(&bank->lock, flags);
>> +
>> +       dirval = ioread32(bank->base + GPIO_SET_DR_OFFSET);
>> +       dirval &= ~BIT(offset);
>> +       iowrite32(dirval, bank->base + GPIO_SET_DR_OFFSET);
>> +
>> +       spin_unlock_irqrestore(&bank->lock, flags);
>> +
>> +       return 0;
>> +}
>> +
>> +#ifdef CONFIG_PM
>> +static int xgene_gpio_suspend(struct device *dev)
>> +{
>> +       struct xgene_gpio *gpio = dev_get_drvdata(dev);
>> +
>> +       gpio->set_dr_val = ioread32(gpio->base + GPIO_SET_DR_OFFSET);
>> +       return 0;
>> +}
>> +
>> +static int xgene_gpio_resume(struct device *dev)
>> +{
>> +       struct xgene_gpio *gpio = dev_get_drvdata(dev);
>> +
>> +       iowrite32(gpio->set_dr_val, gpio->base + GPIO_SET_DR_OFFSET);
>> +       return 0;
>> +}
>> +
>> +static SIMPLE_DEV_PM_OPS(xgene_gpio_pm, xgene_gpio_suspend, xgene_gpio_resume);
>> +#define XGENE_GPIO_PM_OPS      (&xgene_gpio_pm)
>> +#else
>> +#define XGENE_GPIO_PM_OPS      NULL
>> +#endif
>> +
>> +static int xgene_gpio_probe(struct platform_device *pdev)
>> +{
>> +       struct device_node *np = pdev->dev.of_node;
>> +       struct resource *res;
>> +       struct xgene_gpio *gpio;
>> +       int err = 0;
>> +       unsigned int bank = 0, ngpio = 0;
>> +
>> +       gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
>> +       if (!gpio) {
>> +               err = -ENOMEM;
>> +               goto err;
>> +       }
>> +       gpio->dev = &pdev->dev;
>> +
>> +       gpio->banks = devm_kzalloc(&pdev->dev,
>> +                                  sizeof(struct xgene_gpio), GFP_KERNEL);
>> +       if (!gpio->banks) {
>> +               err = -ENOMEM;
>> +               goto err;
>> +       }
>> +
>> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +       gpio->base = devm_ioremap_nocache(&pdev->dev, res->start,
>> +                                                       resource_size(res));
>> +       if (IS_ERR(gpio->base)) {
>> +               err = PTR_ERR(gpio->base);
>> +               goto err;
>> +       }
>> +
>> +       /*
>> +        * Determine gpio bank using gpio resource address
>> +        */
>> +       bank = (res->start & 0xff) / 0xc - 1;
>> +       if (bank > 2) {
>> +               dev_err(gpio->dev, "incorrect gpio base specified\n");
>> +               goto err;
>> +       }
>> +
>> +       ngpio = XGENE_MAX_GPIO_PER_BANK;
>> +       gpio->chip.ngpio = ngpio;
>
> Maybe use XGENE_MAX_GPIO_PER_BANK directly instead of ngpio which is
> not used otherwise.
>
>> +       gpio->chip.of_node = np;
>> +       gpio->chip.base = bank * ngpio;
>
> This is dangerous. You are assuming that your chip will be the first
> GPIO chip to be registered. Can't you leave chip.base uninitialized?
In a SoC system where there are multiple gpio blocks by different vendor, how
do one assign base to each block? I want them to boot up the system in a way
that the gpio values make sense each time.

>
>> +       gpio->chip.label = dev_name(&pdev->dev);
>> +
>> +       gpio->chip.direction_input = xgene_gpio_dir_in;
>> +       gpio->chip.direction_output = xgene_gpio_dir_out;
>> +       gpio->chip.get = xgene_gpio_get;
>> +       gpio->chip.set = xgene_gpio_set;
>> +
>> +       platform_set_drvdata(pdev, gpio);
>> +
>> +       err = gpiochip_add(&gpio->chip);
>> +       if (err) {
>> +               dev_err(gpio->dev,
>> +                       "failed to register gpiochip for bank%d\n", bank);
>> +               goto err;
>> +       }
>> +
>> +       dev_info(&pdev->dev, "X-Gene GPIO driver registered\n");
>> +       return 0;
>> +err:
>> +       dev_err(&pdev->dev, "X-Gene GPIO driver registration failed\n");
>> +       return err;
>> +}
>> +
>> +#ifdef CONFIG_OF
>> +static const struct of_device_id xgene_gpio_of_match[] = {
>> +       { .compatible = "apm,xgene-gpio", },
>> +       {},
>> +};
>> +MODULE_DEVICE_TABLE(of, xgene_gpio_of_match);
>> +#endif
>> +
>> +static struct platform_driver xgene_gpio_driver = {
>> +       .driver = {
>> +               .name = "xgene-gpio",
>> +               .owner = THIS_MODULE,
>> +               .of_match_table = of_match_ptr(xgene_gpio_of_match),
>> +               .pm     = XGENE_GPIO_PM_OPS,
>> +       },
>> +       .probe = xgene_gpio_probe,
>> +};
>> +
>> +module_platform_driver(xgene_gpio_driver);
>> +
>> +MODULE_AUTHOR("Feng Kan <fkan@xxxxxxx>");
>> +MODULE_DESCRIPTION("APM X-Gene GPIO driver");
>> +MODULE_LICENSE("GPL");
>> --
>> 1.9.1
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux