Re: [PATCH] gpio: do not set up hardware for IRQ_TYPE_NONE

[Peter Ujfalusi <peter.ujfalusi@xxxxxx>]

On 04/23/2014 05:50 PM, Linus Walleij wrote:
> Some GPIO irqchip drivers exploit the irqdomain mapping
> function to set up the IRQ default type in the hardware,
> make sure that if we pass IRQ_TYPE_NONE, no hardware setup
> whatsoever takes place (this should be the norm) until
> later when the IRQ gets utilized.
> 
> Cc: Nishanth Menon <nm@xxxxxx>
> Cc: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
> Cc: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxxxxxxxxxx>
> Cc: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
> Cc: Tony Lindgren <tony@xxxxxxxxxxx>
> Cc: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
> Cc: linux-omap <linux-omap@xxxxxxxxxxxxxxx>
> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> ---
> TI folks: can you provide a Tested-by tag if this makes your
> OMAPs work? I am pretty sure the other platforms will be
> unaffected, if they aren't I will switch them over to react
> to IRQ_TYPE_DEFAULT.
> ---
>  drivers/gpio/gpiolib.c | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)

Thanks:

Tested-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>

> 
> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
> index ee1819fdcf35..97d173e9aa2d 100644
> --- a/drivers/gpio/gpiolib.c
> +++ b/drivers/gpio/gpiolib.c
> @@ -1409,7 +1409,12 @@ static int gpiochip_irq_map(struct irq_domain *d, unsigned int irq,
>  #else
>  	irq_set_noprobe(irq);
>  #endif
> -	irq_set_irq_type(irq, chip->irq_default_type);
> +	/*
> +	 * No set-up of the hardware will happen if IRQ_TYPE_NONE
> +	 * is passed as default type.
> +	 */
> +	if (chip->irq_default_type != IRQ_TYPE_NONE)
> +		irq_set_irq_type(irq, chip->irq_default_type);
>  
>  	return 0;
>  }
> @@ -1490,7 +1495,8 @@ static void gpiochip_irqchip_remove(struct gpio_chip *gpiochip)
>   * @first_irq: if not dynamically assigned, the base (first) IRQ to
>   * allocate gpiochip irqs from
>   * @handler: the irq handler to use (often a predefined irq core function)
> - * @type: the default type for IRQs on this irqchip
> + * @type: the default type for IRQs on this irqchip, pass IRQ_TYPE_NONE
> + * to have the core avoid setting up any default type in the hardware.
>   *
>   * This function closely associates a certain irqchip with a certain
>   * gpiochip, providing an irq domain to translate the local IRQs to
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html