Re: [PATCH 7/8] wbt: add general throttling mechanism

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05/03/2016 09:48 AM, Jan Kara wrote:
On Tue 03-05-16 17:40:32, Jan Kara wrote:
On Tue 03-05-16 11:34:10, Jan Kara wrote:
Yeah, once I'll hunt down that regression with old disk, I can have a look
into how writeback throttling plays together with blkio-controller.

So I've tried the following script (note that you need cgroup v2 for
writeback IO to be throttled):

---
mkdir /sys/fs/cgroup/group1
echo 1000 >/sys/fs/cgroup/group1/io.weight
dd if=/dev/zero of=/mnt/file1 bs=1M count=10000&
DD1=$!
echo $DD1 >/sys/fs/cgroup/group1/cgroup.procs

mkdir /sys/fs/cgroup/group2
echo 100 >/sys/fs/cgroup/group2/io.weight
#echo "259:65536 wbps=5000000" >/sys/fs/cgroup/group2/io.max
echo "259:65536 wbps=max" >/sys/fs/cgroup/group2/io.max
dd if=/dev/zero of=/mnt/file2 bs=1M count=10000&
DD2=$!
echo $DD2 >/sys/fs/cgroup/group2/cgroup.procs

while true; do
         sleep 1
         kill -USR1 $DD1
         kill -USR1 $DD2
         echo  '======================================================='
done
---

and watched the progress of the dd processes in different cgroups. The 1/10
weight difference has no effect with your writeback patches - the situation
after one minute:

3120+1 records in
3120+1 records out
3272392704 bytes (3.3 GB) copied, 63.7119 s, 51.4 MB/s
3217+1 records in
3217+1 records out
3374010368 bytes (3.4 GB) copied, 63.5819 s, 53.1 MB/s

I should add that even without your patches the progress doesn't quite
correspond to the weight ratio:

Forgot to fill in corresponding data for unpatched kernel here:

5962+2 records in
5962+2 records out
6252281856 bytes (6.3 GB) copied, 64.1719 s, 97.4 MB/s
1502+0 records in
1502+0 records out
1574961152 bytes (1.6 GB) copied, 64.207 s, 24.5 MB/s

Thanks for testing this, I'll see what we can do about that. It stands to reason that we'll throttle a heavier writer more, statistically. But I'm assuming this above test was run basically with just the writes going, so no real competition? And hence we end up throttling them equally much, destroying the weighting in the process. But for both cases, we basically don't pay any attention to cgroup weights.

but still there is noticeable difference to cgroups with different weights.

OTOH blk-throttle combines well with your patches: Limiting one cgroup to
5 M/s results in numbers like:

3883+2 records in
3883+2 records out
4072091648 bytes (4.1 GB) copied, 36.6713 s, 111 MB/s
413+0 records in
413+0 records out
433061888 bytes (433 MB) copied, 36.8939 s, 11.7 MB/s

which is fine and comparable with unpatched kernel. Higher throughput
number is because we do buffered writes and dd reports what it wrote into
page cache. And there is no wonder blk-throttle combines fine - it
throttles bios which happens before we reach writeback throttling
mechanism.

OK, that's good, at least that part works fine. And yes, the throttle path is hit before we end up in the make_request_fn, which is where wbt drops in.

So I belive this demonstrates that your writeback throttling just doesn't
work well with selective scheduling policy that happens below it because it
can essentially lead to IO priority inversion issues...

It this testing still done on the QD=1 ATA disk? Not too surprising that this falls apart, since we have very little room to maneuver. I wonder if a normal SATA with NCQ would behave better in this regard. I'll have to test a bit and think about how we can best handle this case.

--
Jens Axboe

--
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [Samba]     [Device Mapper]     [CEPH Development]
  Powered by Linux