On 03/23/2016 09:39 AM, Jens Axboe wrote:
Hi,
Apparently I dropped the subject on this one, it's of course v2 of the
writeback not sucking patchset...
Some test result. I've run a lot of them, on various types of storage,
and performance seems good with the default settings.
This case reads in a file and writes it to stdout. It targets a certain
latency for the reads - by default it's 10ms. If a read isn't done my
10ms, it'll queue the next read. This avoids the coordinated omission
problem, where one long latency is in fact many of them, you just don't
knows since you don't issue more while one is stuck.
The test case reads a compressed file, and writes it over a pipe to gzip
to decompress it. The input file is around 9G, uncompresses to 20G. At
the end of the run, latency results are shown. Every time the target
latency is exceeded during the run, it's output.
To keep the system busy, 75% (24G) of the memory is taking up by CPU
hogs. This is intended to make the case worse for the throttled depth,
as Dave pointed out.
Out-of-the-box results:
# time (./read-to-pipe-async -f randfile.gz | gzip -dc > outfile; sync)
read latency=11790 usec
read latency=82697 usec
[...]
Latency percentiles (usec) (READERS)
50.0000th: 4
75.0000th: 5
90.0000th: 6
95.0000th: 7
99.0000th: 54
99.5000th: 64
99.9000th: 334
99.9900th: 17952
99.9990th: 101504
99.9999th: 203520
Over=333, min=0, max=215367
Latency percentiles (usec) (WRITERS)
50.0000th: 3
75.0000th: 5
90.0000th: 454
95.0000th: 473
99.0000th: 615
99.5000th: 625
99.9000th: 815
99.9900th: 1142
99.9990th: 2244
99.9999th: 10032
Over=3, min=0, max=10811
Read rate (KB/sec) : 88988
Write rate (KB/sec): 60019
real 2m38.701s
user 2m33.030s
sys 1m31.540s
215ms worst case latency, 333 cases of being above the 10ms target. And
with the patchset applied:
# time (./read-to-pipe-async -f randfile.gz | gzip -dc > outfile; sync)
write latency=15394 usec
[...]
Latency percentiles (usec) (READERS)
50.0000th: 4
75.0000th: 5
90.0000th: 6
95.0000th: 8
99.0000th: 55
99.5000th: 64
99.9000th: 338
99.9900th: 2652
99.9990th: 3964
99.9999th: 7464
Over=1, min=0, max=10221
Latency percentiles (usec) (WRITERS)
50.0000th: 4
75.0000th: 5
90.0000th: 450
95.0000th: 471
99.0000th: 611
99.5000th: 623
99.9000th: 703
99.9900th: 1106
99.9990th: 2010
99.9999th: 10448
Over=6, min=1, max=15394
Read rate (KB/sec) : 95506
Write rate (KB/sec): 59970
real 2m39.014s
user 2m33.800s
sys 1m35.210s
I won't bore you with vmstat output, it's pretty messy for the default case.
--
Jens Axboe
--
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
