[PATCH 3/3] block: implement (some of) fallocate for block devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



After much discussion, it seems that the fallocate feature flag
FALLOC_FL_ZERO_RANGE maps nicely to SCSI WRITE SAME; and the feature
FALLOC_FL_PUNCH_HOLE maps nicely to the devices that have been
whitelisted for zeroing SCSI UNMAP.  Punch still requires that
FALLOC_FL_KEEP_SIZE is set.  A length that goes past the end of the
device will be clamped to the device size if KEEP_SIZE is set; or will
return -EINVAL if not.  Both start and length must be aligned to the
device's logical block size.

Since the semantics of fallocate are fairly well established already,
wire up the two pieces.  The other fallocate variants (collapse range,
insert range, and allocate blocks) are not supported.

Signed-off-by: Darrick J. Wong <darrick.wong@xxxxxxxxxx>
---
 fs/block_dev.c |   69 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 fs/open.c      |    3 ++
 2 files changed, 71 insertions(+), 1 deletion(-)


diff --git a/fs/block_dev.c b/fs/block_dev.c
index 826b164..6137c6e 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -30,6 +30,7 @@
 #include <linux/cleancache.h>
 #include <linux/dax.h>
 #include <asm/uaccess.h>
+#include <linux/falloc.h>
 #include "internal.h"
 
 struct bdev_inode {
@@ -1786,6 +1787,73 @@ static int blkdev_mmap(struct file *file, struct vm_area_struct *vma)
 #define blkdev_mmap generic_file_mmap
 #endif
 
+#define	BLKDEV_FALLOC_FL_SUPPORTED					\
+		(FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE |		\
+		 FALLOC_FL_ZERO_RANGE)
+
+long blkdev_fallocate(struct file *file, int mode, loff_t start, loff_t len)
+{
+	struct block_device *bdev = I_BDEV(bdev_file_inode(file));
+	struct request_queue *q = bdev_get_queue(bdev);
+	struct address_space *mapping;
+	loff_t end = start + len - 1;
+	loff_t bs_mask, isize;
+	int error;
+
+	/* We only support zero range and punch hole. */
+	if (mode & ~BLKDEV_FALLOC_FL_SUPPORTED)
+		return -EOPNOTSUPP;
+
+	/* We haven't a primitive for "ensure space exists" right now. */
+	if (!(mode & ~FALLOC_FL_KEEP_SIZE))
+		return -EOPNOTSUPP;
+
+	/* Only punch if the device can do zeroing discard. */
+	if ((mode & FALLOC_FL_PUNCH_HOLE) &&
+	    (!blk_queue_discard(q) || !q->limits.discard_zeroes_data))
+		return -EOPNOTSUPP;
+
+	/* Don't go off the end of the device */
+	isize = i_size_read(bdev->bd_inode);
+	if (start >= isize)
+		return -EINVAL;
+	if (end > isize) {
+		if (mode & FALLOC_FL_KEEP_SIZE) {
+			len = isize - start;
+			end = start + len - 1;
+		} else
+			return -EINVAL;
+	}
+
+	/* Don't allow IO that isn't aligned to logical block size */
+	bs_mask = bdev_logical_block_size(bdev) - 1;
+	if ((start | len) & bs_mask)
+		return -EINVAL;
+
+	/* Invalidate the page cache, including dirty pages. */
+	mapping = bdev->bd_inode->i_mapping;
+	truncate_inode_pages_range(mapping, start, end);
+
+	error = -EINVAL;
+	if (mode & FALLOC_FL_ZERO_RANGE)
+		error = blkdev_issue_zeroout(bdev, start >> 9, len >> 9,
+					    GFP_KERNEL, false);
+	else if (mode & FALLOC_FL_PUNCH_HOLE)
+		error = blkdev_issue_discard(bdev, start >> 9, len >> 9,
+					     GFP_KERNEL, 0);
+	if (error)
+		return error;
+
+	/*
+	 * Invalidate again; if someone wandered in and dirtied a page,
+	 * the caller will be given -EBUSY;
+	 */
+	return invalidate_inode_pages2_range(mapping,
+					     start >> PAGE_CACHE_SHIFT,
+					     end >> PAGE_CACHE_SHIFT);
+}
+EXPORT_SYMBOL_GPL(blkdev_fallocate);
+
 const struct file_operations def_blk_fops = {
 	.open		= blkdev_open,
 	.release	= blkdev_close,
@@ -1800,6 +1868,7 @@ const struct file_operations def_blk_fops = {
 #endif
 	.splice_read	= generic_file_splice_read,
 	.splice_write	= iter_file_splice_write,
+	.fallocate	= blkdev_fallocate,
 };
 
 int ioctl_by_bdev(struct block_device *bdev, unsigned cmd, unsigned long arg)
diff --git a/fs/open.c b/fs/open.c
index 55bdc75..4f99adc 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -289,7 +289,8 @@ int vfs_fallocate(struct file *file, int mode, loff_t offset, loff_t len)
 	 * Let individual file system decide if it supports preallocation
 	 * for directories or not.
 	 */
-	if (!S_ISREG(inode->i_mode) && !S_ISDIR(inode->i_mode))
+	if (!S_ISREG(inode->i_mode) && !S_ISDIR(inode->i_mode) &&
+	    !S_ISBLK(inode->i_mode))
 		return -ENODEV;
 
 	/* Check for wrap through zero too */

--
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [Samba]     [Device Mapper]     [CEPH Development]
  Powered by Linux