> >
> > > > }
> > > > do_collapse_range(offset, size);
> > > > break;
> > > > + case OP_INSERT_RANGE:
> > > > + TRIM_OFF(offset, file_size);
> > > > + TRIM_LEN(offset, size, maxfilelen - file_size);
> > >
> > > Ugh, I hit a crash down in do_insert_range() due to the memset() on
> > > good_buf going off the end of the buffer. It looks like the TRIM_LEN()
> > > here is not correct and can result in a really large length value.
> > >
> > > Perhaps something like TRIM_LEN(file_size, length, maxfilelen) is what
> > > we want for insert range ops?
> > Hi Brian,
> > Oops, Sorry about that.
> > And your change is correct.
> >
> > Could you review the below updated patch ?
> >
>
> This one looks good. Also, I ran overnight with the same change and it
> went for 23m ops. Not sure why it ended up stopping as the output files
> compare fine. I'll get it running on another box and see if I can
> repeat.
>
> Reviewed-by: Brian Foster <bfoster@xxxxxxxxxx>
Thanks you. If you find any issue, Please share with me.
>
> > Thanks!
> >
> > ------------------------------------------------------------------------------
> > Subject: [PATCH v9 11/11] xfstests: fsx: Add fallocate insert range operation
> >
> > This commit adds fallocate FALLOC_FL_INSERT_RANGE support for fsx.
> >
> > Signed-off-by: Namjae Jeon <namjae.jeon@xxxxxxxxxxx>
> > Signed-off-by: Ashish Sangwan <a.sangwan@xxxxxxxxxxx>
> > ---
> > ltp/fsx.c | 124 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----
> > 1 files changed, 114 insertions(+), 10 deletions(-)
> >
> > diff --git a/ltp/fsx.c b/ltp/fsx.c
> > index 3709419..9fed5b2 100644
> > --- a/ltp/fsx.c
> > +++ b/ltp/fsx.c
> > @@ -95,7 +95,8 @@ int logcount = 0; /* total ops */
> > #define OP_PUNCH_HOLE 6
> > #define OP_ZERO_RANGE 7
> > #define OP_COLLAPSE_RANGE 8
> > -#define OP_MAX_FULL 9
> > +#define OP_INSERT_RANGE 9
> > +#define OP_MAX_FULL 10
> >
> > /* operation modifiers */
> > #define OP_CLOSEOPEN 100
> > @@ -145,6 +146,7 @@ int fallocate_calls = 1; /* -F flag disables */
> > int punch_hole_calls = 1; /* -H flag disables */
> > int zero_range_calls = 1; /* -z flag disables */
> > int collapse_range_calls = 1; /* -C flag disables */
> > +int insert_range_calls = 1; /* -i flag disables */
> > int mapped_reads = 1; /* -R flag disables it */
> > int fsxgoodfd = 0;
> > int o_direct; /* -Z */
> > @@ -339,6 +341,14 @@ logdump(void)
> > lp->args[0] + lp->args[1])
> > prt("\t******CCCC");
> > break;
> > + case OP_INSERT_RANGE:
> > + prt("INSERT 0x%x thru 0x%x\t(0x%x bytes)",
> > + lp->args[0], lp->args[0] + lp->args[1] - 1,
> > + lp->args[1]);
> > + if (badoff >= lp->args[0] && badoff <
> > + lp->args[0] + lp->args[1])
> > + prt("\t******CCCC");
> > + break;
> > case OP_SKIPPED:
> > prt("SKIPPED (no operation)");
> > break;
> > @@ -1012,6 +1022,59 @@ do_collapse_range(unsigned offset, unsigned length)
> > }
> > #endif
> >
> > +#ifdef FALLOC_FL_INSERT_RANGE
> > +void
> > +do_insert_range(unsigned offset, unsigned length)
> > +{
> > + unsigned end_offset;
> > + int mode = FALLOC_FL_INSERT_RANGE;
> > +
> > + if (length == 0) {
> > + if (!quiet && testcalls > simulatedopcount)
> > + prt("skipping zero length insert range\n");
> > + log4(OP_SKIPPED, OP_INSERT_RANGE, offset, length);
> > + return;
> > + }
> > +
> > + if ((loff_t)offset >= file_size) {
> > + if (!quiet && testcalls > simulatedopcount)
> > + prt("skipping insert range behind EOF\n");
> > + log4(OP_SKIPPED, OP_INSERT_RANGE, offset, length);
> > + return;
> > + }
> > +
> > + log4(OP_INSERT_RANGE, offset, length, 0);
> > +
> > + if (testcalls <= simulatedopcount)
> > + return;
> > +
> > + end_offset = offset + length;
> > + if ((progressinterval && testcalls % progressinterval == 0) ||
> > + (debug && (monitorstart == -1 || monitorend == -1 ||
> > + end_offset <= monitorend))) {
> > + prt("%lu insert\tfrom 0x%x to 0x%x, (0x%x bytes)\n", testcalls,
> > + offset, offset+length, length);
> > + }
> > + if (fallocate(fd, mode, (loff_t)offset, (loff_t)length) == -1) {
> > + prt("insert range: %x to %x\n", offset, length);
> > + prterr("do_insert_range: fallocate");
> > + report_failure(161);
> > + }
> > +
> > + memmove(good_buf + end_offset, good_buf + offset,
> > + file_size - offset);
> > + memset(good_buf + offset, '\0', length);
> > + file_size += length;
> > +}
> > +
> > +#else
> > +void
> > +do_insert_range(unsigned offset, unsigned length)
> > +{
> > + return;
> > +}
> > +#endif
> > +
> > #ifdef HAVE_LINUX_FALLOC_H
> > /* fallocate is basically a no-op unless extending, then a lot like a truncate */
> > void
> > @@ -1117,14 +1180,25 @@ docloseopen(void)
> > }
> > }
> >
> > -#define TRIM_OFF_LEN(off, len, size) \
> > -do { \
> > - if (size) \
> > - (off) %= (size); \
> > - else \
> > - (off) = 0; \
> > - if ((off) + (len) > (size)) \
> > - (len) = (size) - (off); \
> > +
> > +#define TRIM_OFF(off, size) \
> > +do { \
> > + if (size) \
> > + (off) %= (size); \
> > + else \
> > + (off) = 0; \
> > +} while (0)
> > +
> > +#define TRIM_LEN(off, len, size) \
> > +do { \
> > + if ((off) + (len) > (size)) \
> > + (len) = (size) - (off); \
> > +} while (0)
> > +
> > +#define TRIM_OFF_LEN(off, len, size) \
> > +do { \
> > + TRIM_OFF(off, size); \
> > + TRIM_LEN(off, len, size); \
> > } while (0)
> >
> > void
> > @@ -1192,6 +1266,12 @@ test(void)
> > goto out;
> > }
> > break;
> > + case OP_INSERT_RANGE:
> > + if (!insert_range_calls) {
> > + log4(OP_SKIPPED, OP_INSERT_RANGE, offset, size);
> > + goto out;
> > + }
> > + break;
> > }
> >
> > switch (op) {
> > @@ -1244,6 +1324,22 @@ test(void)
> > }
> > do_collapse_range(offset, size);
> > break;
> > + case OP_INSERT_RANGE:
> > + TRIM_OFF(offset, file_size);
> > + TRIM_LEN(file_size, size, maxfilelen);
> > + offset = offset & ~(block_size - 1);
> > + size = size & ~(block_size - 1);
> > + if (size == 0) {
> > + log4(OP_SKIPPED, OP_INSERT_RANGE, offset, size);
> > + goto out;
> > + }
> > + if (file_size + size > maxfilelen) {
> > + log4(OP_SKIPPED, OP_INSERT_RANGE, offset, size);
> > + goto out;
> > + }
> > +
> > + do_insert_range(offset, size);
> > + break;
> > default:
> > prterr("test: unknown operation");
> > report_failure(42);
> > @@ -1307,6 +1403,9 @@ usage(void)
> > #ifdef FALLOC_FL_COLLAPSE_RANGE
> > " -C: Do not use collapse range calls\n"
> > #endif
> > +#ifdef FALLOC_FL_INSERT_RANGE
> > +" -i: Do not use insert range calls\n"
> > +#endif
> > " -L: fsxLite - no file creations & no file size changes\n\
> > -N numops: total # operations to do (default infinity)\n\
> > -O: use oplen (see -o flag) for every op (default random)\n\
> > @@ -1493,7 +1592,7 @@ main(int argc, char **argv)
> >
> > setvbuf(stdout, (char *)0, _IOLBF, 0); /* line buffered stdout */
> >
> > - while ((ch = getopt(argc, argv, "b:c:dfl:m:no:p:qr:s:t:w:xyAD:FHzCLN:OP:RS:WZ"))
> > + while ((ch = getopt(argc, argv, "b:c:dfl:m:no:p:qr:s:t:w:xyAD:FHzCiLN:OP:RS:WZ"))
> > != EOF)
> > switch (ch) {
> > case 'b':
> > @@ -1599,6 +1698,9 @@ main(int argc, char **argv)
> > case 'C':
> > collapse_range_calls = 0;
> > break;
> > + case 'i':
> > + insert_range_calls = 0;
> > + break;
> > case 'L':
> > lite = 1;
> > break;
> > @@ -1758,6 +1860,8 @@ main(int argc, char **argv)
> > zero_range_calls = test_fallocate(FALLOC_FL_ZERO_RANGE);
> > if (collapse_range_calls)
> > collapse_range_calls = test_fallocate(FALLOC_FL_COLLAPSE_RANGE);
> > + if (insert_range_calls)
> > + insert_range_calls = test_fallocate(FALLOC_FL_INSERT_RANGE);
> >
> > while (numops == -1 || numops--)
> > test();
> > --
> > 1.7.7
> >
> >
> >
--
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
