On Fri, Jan 02, 2015 at 06:42:41PM +0900, Namjae Jeon wrote: > This testcase(043) tries to test finsert range a single alternate block > mulitiple times and test merge code of collase range. > > Signed-off-by: Namjae Jeon <namjae.jeon@xxxxxxxxxxx> > Signed-off-by: Ashish Sangwan <a.sangwan@xxxxxxxxxxx> > Cc: Brian Foster <bfoster@xxxxxxxxxx> > --- > tests/generic/043 | 107 ++++++++++++++++++++++++++++++++++++++++++++++++++ > tests/generic/043.out | 7 ++++ > tests/generic/group | 1 + > 3 files changed, 115 insertions(+) > create mode 100644 tests/generic/043 > create mode 100644 tests/generic/043.out > > diff --git a/tests/generic/043 b/tests/generic/043 > new file mode 100644 > index 0000000..6aebc1e > --- /dev/null > +++ b/tests/generic/043 > @@ -0,0 +1,107 @@ > +#! /bin/bash > +# FS QA Test No. generic/043 > +# > +# Test multiple fallocate insert/collapse range calls on same file. > +# For different blocksizes, Call insert range a single alternate block > +# multiple times until the file is left with 100 extents and as much > +# number of extents. And Call collapse range about the previously inserted > +# ranges to test merge code of collapse range. > +# Also check for file system consistency after completing this operation > +# for each blocksize. > +#----------------------------------------------------------------------- > +# Copyright (c) 2014 Samsung Electronics. All Rights Reserved. > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation. > +# > +# This program is distributed in the hope that it would be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write the Free Software Foundation, > +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > +# > +#----------------------------------------------------------------------- > +# > + > +seq=`basename $0` > +seqres=$RESULT_DIR/$seq > +echo "QA output created by $seq" > + > +here=`pwd` > +tmp=/tmp/$$ > +status=1 # failure is the default! > +trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15 > + > +# get standard environment, filters and checks > +. ./common/rc > +. ./common/filter > + > +# real QA test starts here > +_supported_fs generic > +_supported_os Linux > + > +_require_scratch > +_require_xfs_io_command "fiemap" > +_require_xfs_io_command "finsert" > +_require_xfs_io_command "fcollapse" > +_do_die_on_error=y > +testfile=$SCRATCH_MNT/$seq.$$ > +BLOCKS=100 > + > +for (( BSIZE = 1024; BSIZE <= 4096; BSIZE *= 2 )); do > + > + length=$(($BLOCKS * $BSIZE)) > + case $FSTYP in > + xfs) > + _scratch_mkfs -b size=$BSIZE >> $seqres.full 2>&1 > + ;; > + ext4) > + _scratch_mkfs -b $BSIZE >> $seqres.full 2>&1 > + ;; > + esac I think we typically try to define things like blocksize in the test configuration. The MKFS_OPTIONS env. var. can be defined with the correct options for the associated fs being tested. That eliminates the need to loop and for the fs-specific _scratch_mkfs calls above. > + _scratch_mount >> $seqres.full 2>&1 > + > + # Write file > + $XFS_IO_PROG -f -c "pwrite 0 $length" -c fsync $testfile > /dev/null > + > + > + # Insert alternate blocks Trailing space in the above comment. > + for (( j=0; j < $(($BLOCKS/2)); j++ )); do > + offset=$((($j*$BSIZE)*2)) > + $XFS_IO_PROG -c "finsert $offset $BSIZE" $testfile > /dev/null > + done > + > + # Check if 100 extents are present > + $XFS_IO_PROG -c "fiemap -v" $testfile | grep "^ *[0-9]*:" |wc -l > + > + _check_scratch_fs > + if [ $? -ne 0 ]; then > + status=1 > + exit > + fi > + > + # Collapse alternate blocks ... and here as well. > + for (( j=0; j < $(($BLOCKS/2)); j++ )); do > + offset=$((($j*$BSIZE))) > + $XFS_IO_PROG -c "fcollapse $offset $BSIZE" $testfile > /dev/null > + done > + > + # Check if 1 extents are present > + $XFS_IO_PROG -c "fiemap -v" $testfile | grep "^ *[0-9]*:" |wc -l > + > + _check_scratch_fs > + if [ $? -ne 0 ]; then > + status=1 > + exit > + fi > + Maybe create a copy of the original file before we run through the insert and collapse sequence and cmp the files here as a last step? Brian > + umount $SCRATCH_MNT > +done > + > +# success, all done > +status=0 > +exit > diff --git a/tests/generic/043.out b/tests/generic/043.out > new file mode 100644 > index 0000000..fd4b804 > --- /dev/null > +++ b/tests/generic/043.out > @@ -0,0 +1,7 @@ > +QA output created by 043 > +100 > +1 > +100 > +1 > +100 > +1 > diff --git a/tests/generic/group b/tests/generic/group > index c0944b3..0a10bdd 100644 > --- a/tests/generic/group > +++ b/tests/generic/group > @@ -45,6 +45,7 @@ > 040 auto quick prealloc > 041 auto quick prealloc > 042 auto quick prealloc > +043 auto quick prealloc > 053 acl repair auto quick > 062 attr udf auto quick > 068 other auto freeze dangerous stress > -- > 1.8.5.5 > -- To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
