On Wed 10-09-14 11:54:07, Li Xi wrote:
> Adds project ID support for ext4
>
> This patch adds a new internal field of ext4 inode to save project
> identifier. Also a new flag EXT4_INODE_PROJINHERIT is added for
> inheriting project ID from parent directory.
>
> Signed-off-by: Li Xi <lixi <at> ddn.com>
> ---
> Index: linux.git/fs/ext4/ialloc.c
> ===================================================================
> --- linux.git.orig/fs/ext4/ialloc.c
> +++ linux.git/fs/ext4/ialloc.c
> @@ -756,6 +756,16 @@ struct inode *__ext4_new_inode(handle_t
> inode->i_gid = dir->i_gid;
> } else
> inode_init_owner(inode, dir, mode);
> +#ifdef CONFIG_QUOTA_PROJECT
> + if (EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_PROJECT)) {
> + if (ext4_test_inode_flag(dir, EXT4_INODE_PROJINHERIT)) {
> + ei->i_projid = EXT4_I(dir)->i_projid;
> + } else {
> + ei->i_projid =
> + make_kprojid(&init_user_ns, EXT4_DEF_PROJID);
> + }
> + }
> +#endif
Hum, I'd just always store the default project ID in the inode (i.e., you
can remove the feature test). Then ext4_get_projid() also doesn't have to
bother checking the feature and can just return whatever is in i_projid.
> dquot_initialize(inode);
>
> if (!goal)
> Index: linux.git/fs/ext4/ext4.h
> ===================================================================
> --- linux.git.orig/fs/ext4/ext4.h
> +++ linux.git/fs/ext4/ext4.h
> @@ -386,16 +386,18 @@ struct flex_groups {
> #define EXT4_EA_INODE_FL 0x00200000 /* Inode used for large EA */
> #define EXT4_EOFBLOCKS_FL 0x00400000 /* Blocks allocated beyond EOF */
> #define EXT4_INLINE_DATA_FL 0x10000000 /* Inode has inline data. */
> +#define EXT4_PROJINHERIT_FL 0x20000000 /* Create with parents projid */
Why not use the next available flag - 0x00800000?
> #define EXT4_RESERVED_FL 0x80000000 /* reserved for ext4 lib */
>
> -#define EXT4_FL_USER_VISIBLE 0x004BDFFF /* User visible flags */
> -#define EXT4_FL_USER_MODIFIABLE 0x004380FF /* User modifiable flags */
> +#define EXT4_FL_USER_VISIBLE 0x204BDFFF /* User visible flags */
> +#define EXT4_FL_USER_MODIFIABLE 0x204380FF /* User modifiable flags */
>
> /* Flags that should be inherited by new inodes from their parent. */
> #define EXT4_FL_INHERITED (EXT4_SECRM_FL | EXT4_UNRM_FL | EXT4_COMPR_FL |\
> EXT4_SYNC_FL | EXT4_NODUMP_FL | EXT4_NOATIME_FL |\
> EXT4_NOCOMPR_FL | EXT4_JOURNAL_DATA_FL |\
> - EXT4_NOTAIL_FL | EXT4_DIRSYNC_FL)
> + EXT4_NOTAIL_FL | EXT4_DIRSYNC_FL |\
> + EXT4_PROJINHERIT_FL)
>
> /* Flags that are appropriate for regular files (all but dir-specific ones). */
> #define EXT4_REG_FLMASK (~(EXT4_DIRSYNC_FL | EXT4_TOPDIR_FL))
> @@ -443,6 +445,7 @@ enum {
> EXT4_INODE_EA_INODE = 21, /* Inode used for large EA */
> EXT4_INODE_EOFBLOCKS = 22, /* Blocks allocated beyond EOF */
> EXT4_INODE_INLINE_DATA = 28, /* Data in inode. */
> + EXT4_INODE_PROJINHERIT = 29, /* Create with parents projid */
This will need updating as well.
> EXT4_INODE_RESERVED = 31, /* reserved for ext4 lib */
> };
>
> @@ -695,6 +698,7 @@ struct ext4_inode {
> __le32 i_crtime; /* File Creation time */
> __le32 i_crtime_extra; /* extra FileCreationtime (nsec << 2 | epoch) */
> __le32 i_version_hi; /* high 32 bits for 64-bit version */
> + __le32 i_projid; /* Project ID */
> };
>
> struct move_extent {
> @@ -943,6 +947,9 @@ struct ext4_inode_info {
>
> /* Precomputed uuid+inum+igen checksum for seeding inode checksums */
> __u32 i_csum_seed;
> +#ifdef CONFIG_QUOTA_PROJECT
> + kprojid_t i_projid;
> +#endif
> };
>
> /*
> @@ -1525,6 +1532,7 @@ static inline void ext4_clear_state_flag
> * GDT_CSUM bits are mutually exclusive.
> */
> #define EXT4_FEATURE_RO_COMPAT_METADATA_CSUM 0x0400
> +#define EXT4_FEATURE_RO_COMPAT_PROJECT 0x1000 /* Project quota */
Why not use the next bit available - i.e. 0x0800?
> #define EXT4_FEATURE_INCOMPAT_COMPRESSION 0x0001
> #define EXT4_FEATURE_INCOMPAT_FILETYPE 0x0002
> @@ -1574,7 +1582,8 @@ static inline void ext4_clear_state_flag
> EXT4_FEATURE_RO_COMPAT_HUGE_FILE |\
> EXT4_FEATURE_RO_COMPAT_BIGALLOC |\
> EXT4_FEATURE_RO_COMPAT_METADATA_CSUM|\
> - EXT4_FEATURE_RO_COMPAT_QUOTA)
> + EXT4_FEATURE_RO_COMPAT_QUOTA |\
> + EXT4_FEATURE_RO_COMPAT_PROJECT)
>
> /*
> * Default values for user and/or group using reserved blocks
> @@ -1582,6 +1591,11 @@ static inline void ext4_clear_state_flag
> #define EXT4_DEF_RESUID 0
> #define EXT4_DEF_RESGID 0
>
> +/*
> + * Default project ID
> + */
> +#define EXT4_DEF_PROJID 0
> +
> #define EXT4_DEF_INODE_READAHEAD_BLKS 32
>
> /*
> @@ -2133,6 +2147,9 @@ extern int ext4_zero_partial_blocks(hand
> loff_t lstart, loff_t lend);
> extern int ext4_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf);
> extern qsize_t *ext4_get_reserved_space(struct inode *inode);
> +#ifdef CONFIG_QUOTA_PROJECT
> +extern int ext4_get_projid(struct inode *inode, kprojid_t *projid);
> +#endif
> extern void ext4_da_update_reserve_space(struct inode *inode,
> int used, int quota_claim);
>
> Index: linux.git/fs/ext4/inode.c
> ===================================================================
> --- linux.git.orig/fs/ext4/inode.c
> +++ linux.git/fs/ext4/inode.c
> @@ -4026,6 +4026,47 @@ static inline void ext4_iget_extra_inode
> EXT4_I(inode)->i_inline_off = 0;
> }
>
> +#ifdef CONFIG_QUOTA_PROJECT
> +static int ext4_inode_projid_get(struct inode *inode, struct ext4_inode *raw,
> + struct ext4_inode_info *ei, projid_t *projid)
> +{
> + BUG_ON(!EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
> + EXT4_FEATURE_RO_COMPAT_PROJECT));
> +
> + if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE &&
> + EXT4_FITS_IN_INODE(raw, ei, i_projid)) {
> + *projid = (projid_t)le32_to_cpu(raw->i_projid);
> + return 0;
> + }
> + return -EFBIG;
> +}
Maybe you should just return the default project ID for inodes that
cannot store one?
> +
> +static int ext4_inode_projid_set(struct inode *inode, struct ext4_inode *raw,
> + struct ext4_inode_info *ei, projid_t projid)
> +{
> + BUG_ON(!EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
> + EXT4_FEATURE_RO_COMPAT_PROJECT));
> +
> + if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE &&
> + EXT4_FITS_IN_INODE(raw, ei, i_projid)) {
> + raw->i_projid = cpu_to_le32(projid);
> + return 0;
> + }
> + return -EFBIG;
> +}
The test whether project ID fits into an inode should be done when
userspace tries to set project ID for the inode in the ioctl. Thus when
we are trying to write the inode and projid doesn't fit into the inode, we
know projid is the default one and we can just avoid storing it.
ext4_inode_projid_get() will then properly interpret this as the default
projid. This way we can make project ids work reasonably for filesystems
where inode needn't have enough space.
> +int ext4_get_projid(struct inode *inode, kprojid_t *projid)
> +{
> + if (!EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
> + EXT4_FEATURE_RO_COMPAT_PROJECT)) {
> + return -ENOTSUPP;
> + }
> +
> + *projid = EXT4_I(inode)->i_projid;
> + return 0;
> +}
> +#endif
> +
...
Honza
--
Jan Kara <jack@xxxxxxx>
SUSE Labs, CR
--
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
