Re: [PATCH] mm: don't allow fault_around_bytes to be 0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/28/14 13:36, Kirill A. Shutemov wrote:
> On Mon, Jul 28, 2014 at 11:43:20AM +0400, Andrey Ryabinin wrote:
>> Sasha Levin triggered use-after-free when fuzzing using trinity and the KASAN
>> patchset:
>>
>> 	AddressSanitizer: use after free in do_read_fault.isra.40+0x3c2/0x510 at addr ffff88048a733110
>> 	page:ffffea001229ccc0 count:0 mapcount:0 mapping:          (null) index:0x0
>> 	page flags: 0xafffff80008000(tail)
>> 	page dumped because: kasan error
>> 	CPU: 6 PID: 9262 Comm: trinity-c104 Not tainted 3.16.0-rc6-next-20140723-sasha-00047-g289342b-dirty #929
>> 	 00000000000000fb 0000000000000000 ffffea001229ccc0 ffff88038ac0fb78
>> 	 ffffffffa5e40903 ffff88038ac0fc48 ffff88038ac0fc38 ffffffffa142acfc
>> 	 0000000000000001 ffff880509ff5aa8 ffff88038ac10038 ffff88038ac0fbb0
>> 	Call Trace:
>> 	dump_stack (lib/dump_stack.c:52)
>> 	kasan_report_error (mm/kasan/report.c:98 mm/kasan/report.c:166)
>> 	? debug_smp_processor_id (lib/smp_processor_id.c:57)
>> 	? preempt_count_sub (kernel/sched/core.c:2606)
>> 	? put_lock_stats.isra.13 (./arch/x86/include/asm/preempt.h:98 kernel/locking/lockdep.c:254)
>> 	? do_read_fault.isra.40 (mm/memory.c:2784 mm/memory.c:2849 mm/memory.c:2898)
>> 	__asan_load8 (mm/kasan/kasan.c:364)
>> 	? do_read_fault.isra.40 (mm/memory.c:2864 mm/memory.c:2898)
>> 	do_read_fault.isra.40 (mm/memory.c:2864 mm/memory.c:2898)
>> 	? _raw_spin_unlock (./arch/x86/include/asm/preempt.h:98 include/linux/spinlock_api_smp.h:152 kernel/locking/spinlock.c:183)
>> 	? __pte_alloc (mm/memory.c:598)
>> 	handle_mm_fault (mm/memory.c:3092 mm/memory.c:3225 mm/memory.c:3345 mm/memory.c:3374)
>> 	? pud_huge (./arch/x86/include/asm/paravirt.h:611 arch/x86/mm/hugetlbpage.c:76)
>> 	__get_user_pages (mm/gup.c:286 mm/gup.c:478)
>> 	__mlock_vma_pages_range (mm/mlock.c:262)
>> 	__mm_populate (mm/mlock.c:710)
>> 	SyS_remap_file_pages (mm/mmap.c:2653 mm/mmap.c:2593)
>> 	tracesys (arch/x86/kernel/entry_64.S:541)
>> 	Read of size 8 by thread T9262:
>> 	Memory state around the buggy address:
>> 	 ffff88048a732e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>> 	 ffff88048a732f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>> 	 ffff88048a732f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>> 	 ffff88048a733000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>> 	 ffff88048a733080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>> 	>ffff88048a733100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>> 	                         ^
>> 	 ffff88048a733180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>> 	 ffff88048a733200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>> 	 ffff88048a733280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>> 	 ffff88048a733300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>> 	 ffff88048a733380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>>
>>
>> It looks like that pte pointer is invalid in do_fault_around().
>> This could happen if fault_around_bytes is set to 0.
>> fault_around_pages() and fault_around_mask() calls rounddown_pow_of_to(fault_around_bytes)
>> The result of rounddown_pow_of_to is undefined if parameter == 0
>> (in my environment it returns 0x8000000000000000).
> 
> Ouch. Good catch!
> 
> Although, I'm not convinced that it caused the issue. Sasha, did you touch the
> debugfs handle?
> 

I suppose trinity could change it, no? I've got the very same spew after setting fault_around_bytes to 0.

>> One way to fix this would be to return 0 from fault_around_pages() if fault_around_bytes == 0,
>> however this would add extra code on fault path.
>>
>> So let's just forbid to set fault_around_bytes to zero.
>> Fault around is not used if fault_around_pages() <= 1, so if anyone doesn't want to use
>> it, fault_around_bytes could be set to any value in range [1, 2*PAGE_SIZE - 1]
>> instead of 0.
> 
>>From user point of view, 0 is perfectly fine. What about untested patch
> below?
> 

In case if we are not going to get rid of debugfs interface I would better keep
faul_around_bytes always roundded down, like in following patch:


>From f41b7777b29f06dc62f80526e5617cae82a38709 Mon Sep 17 00:00:00 2001
From: Andrey Ryabinin <a.ryabinin@xxxxxxxxxxx>
Date: Mon, 28 Jul 2014 13:46:10 +0400
Subject: [PATCH] mm: debugfs: move rounddown_pow_of_two() out from do_fault
 path

do_fault_around expects fault_around_bytes rounded down to nearest
page order. Instead of calling rounddown_pow_of_two every time
in fault_around_pages()/fault_around_mask() we could do round down
when user changes fault_around_bytes via debugfs interface.

This also fixes bug when user set fault_around_bytes to 0.
Result of rounddown_pow_of_two(0) is not defined, therefore
fault_around_bytes == 0 doesn't work without this patch.

Let's set fault_around_bytes to PAGE_SIZE if user sets to something
less than PAGE_SIZE

Fixes: a9b0f861("mm: nominate faultaround area in bytes rather than page order")
Signed-off-by: Andrey Ryabinin <a.ryabinin@xxxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx> # 3.15.x
---
 mm/memory.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/mm/memory.c b/mm/memory.c
index 7e8d820..e0c6fd6 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -2758,20 +2758,16 @@ void do_set_pte(struct vm_area_struct *vma, unsigned long address,
 	update_mmu_cache(vma, address, pte);
 }

-static unsigned long fault_around_bytes = 65536;
+static unsigned long fault_around_bytes = rounddown_pow_of_two(65536);

-/*
- * fault_around_pages() and fault_around_mask() round down fault_around_bytes
- * to nearest page order. It's what do_fault_around() expects to see.
- */
 static inline unsigned long fault_around_pages(void)
 {
-	return rounddown_pow_of_two(fault_around_bytes) / PAGE_SIZE;
+	return fault_around_bytes >> PAGE_SHIFT;
 }

 static inline unsigned long fault_around_mask(void)
 {
-	return ~(rounddown_pow_of_two(fault_around_bytes) - 1) & PAGE_MASK;
+	return ~(fault_around_bytes - 1) & PAGE_MASK;
 }


@@ -2782,11 +2778,18 @@ static int fault_around_bytes_get(void *data, u64 *val)
 	return 0;
 }

+/*
+ * fault_around_pages() and fault_around_mask() expects fault_around_bytes
+ * rounded down to nearest page order. It's what do_fault_around() expects to see.
+ */
 static int fault_around_bytes_set(void *data, u64 val)
 {
 	if (val / PAGE_SIZE > PTRS_PER_PTE)
 		return -EINVAL;
-	fault_around_bytes = val;
+	if (val > PAGE_SIZE)
+		fault_around_bytes = rounddown_pow_of_two(val);
+	else
+		fault_around_bytes = PAGE_SIZE; /* rounddown_pow_of_two(0) is undefined */
 	return 0;
 }
 DEFINE_SIMPLE_ATTRIBUTE(fault_around_bytes_fops,
-- 
1.8.5.5







--
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [Samba]     [Device Mapper]     [CEPH Development]
  Powered by Linux