On 10/10/2013 11:46 PM, Johannes Weiner wrote: > Hi everyone, > > here is an update to the cache sizing patches for 3.13. > > Changes in this revision > > o Drop frequency synchronization between refaulted and demoted pages > and just straight up activate refaulting pages whose access > frequency indicates they could stay in memory. This was suggested > by Rik van Riel a looong time ago but misinterpretation of test > results during early stages of development took me a while to > overcome. It's still the same overall concept, but a little simpler > and with even faster cache adaptation. Yay! Oh, I liked the previous approach with direct competition between the refaulted and demoted page :) Doesn't the new approach favor the refaulted page too much? No wonder it leads to faster cache adaptation, but could it also cause degradations for workloads that don't benefit from it? Were there any tests for performance regressions on workloads that were not the target of the patchset? Vlastimil > o More extensively document underlying design concepts like the > meaning of the refault distance, based on input from Andrew and > Tejun. > > o Document the new page cache lookup API which can return shadow > entries, based on input from Andrew > > o Document and simplify the synchronization between inode teardown and > reclaim planting shadow entries, based on input from Andrew > > o Drop 'time' from names of variables that are not in typical kernel > time units like jiffies or seconds, based on input from Andrew > > Summary of problem & solution > > The VM maintains cached filesystem pages on two types of lists. One > list holds the pages recently faulted into the cache, the other list > holds pages that have been referenced repeatedly on that first list. > The idea is to prefer reclaiming young pages over those that have > shown to benefit from caching in the past. We call the recently used > list "inactive list" and the frequently used list "active list". > > Currently, the VM aims for a 1:1 ratio between the lists, which is the > "perfect" trade-off between the ability to *protect* frequently used > pages and the ability to *detect* frequently used pages. This means > that working set changes bigger than half of cache memory go > undetected and thrash indefinitely, whereas working sets bigger than > half of cache memory are unprotected against used-once streams that > don't even need caching. > > This happens on file servers and media streaming servers, where the > popular files and file sections change over time. Even though the > individual files might be smaller than half of memory, concurrent > access to many of them may still result in their inter-reference > distance being greater than half of memory. It's also been reported > as a problem on database workloads that switch back and forth between > tables that are bigger than half of memory. In these cases the VM > never recognizes the new working set and will for the remainder of the > workload thrash disk data which could easily live in memory. > > Historically, every reclaim scan of the inactive list also took a > smaller number of pages from the tail of the active list and moved > them to the head of the inactive list. This model gave established > working sets more gracetime in the face of temporary use-once streams, > but ultimately was not significantly better than a FIFO policy and > still thrashed cache based on eviction speed, rather than actual > demand for cache. > > This series solves the problem by maintaining a history of pages > evicted from the inactive list, enabling the VM to detect frequently > used pages regardless of inactive list size and so facilitate working > set transitions in excess of the inactive list. > > Tests > > The reported database workload is easily demonstrated on a 16G machine > with two filesets a 12G. This fio workload operates on one set first, > then switches to the other. The VM should obviously always cache the > set that the workload is currently using. > > unpatched: > db1: READ: io=196608MB, aggrb=740405KB/s, minb=740405KB/s, maxb=740405KB/s, mint= 271914msec, maxt= 271914msec > db2: READ: io=196608MB, aggrb= 68558KB/s, minb= 68558KB/s, maxb= 68558KB/s, mint=2936584msec, maxt=2936584msec > > real 53m29.192s > user 1m11.544s > sys 3m34.820s > > patched: > db1: READ: io=196608MB, aggrb=743750KB/s, minb=743750KB/s, maxb=743750KB/s, mint=270691msec, maxt=270691msec > db2: READ: io=196608MB, aggrb=383503KB/s, minb=383503KB/s, maxb=383503KB/s, mint=524967msec, maxt=524967msec > > real 13m16.432s > user 0m56.518s > sys 2m38.284s > > As can be seen, the unpatched kernel simply never adapts to the > workingset change and db2 is stuck with secondary storage speed. The > patched kernel on the other hand needs 2-3 iterations over db2 before > it replaces db1 and reaches full memory speed. Given the unbounded > negative affect of the existing VM behavior, these patches should be > considered correctness fixes rather than performance optimizations. > > Another test resembles a fileserver or streaming server workload, > where data in excess of memory size is accessed at different > frequencies. First, there is very hot data accessed at a high > frequency. Machines should be fitted so that the hot set of such a > workload can be fully cached or all bets are off. Then there is a > very big (compared to available memory) set of data that is used-once > or at a very low frequency; this is what drives the inactive list and > does not really benefit from caching. Lastly, there is a big set of > warm data in between that is accessed at medium frequencies and would > benefit from caching the pages between the first and last streamer of > each burst as much as possible. > > unpatched: > cold: READ: io= 30720MB, aggrb= 24808KB/s, minb= 24808KB/s, maxb= 24808KB/s, mint=1267987msec, maxt=1267987msec > hot: READ: io=174080MB, aggrb=158225KB/s, minb=158225KB/s, maxb=158225KB/s, mint=1126605msec, maxt=1126605msec > warm: READ: io=102400MB, aggrb=112403KB/s, minb= 22480KB/s, maxb= 33010KB/s, mint= 635291msec, maxt= 932866msec > > real 21m15.924s > user 17m36.036s > sys 3m5.117s > > patched: > cold: READ: io= 30720MB, aggrb= 27451KB/s, minb= 27451KB/s, maxb= 27451KB/s, mint=1145932msec, maxt=1145932msec > hot: READ: io=174080MB, aggrb=158617KB/s, minb=158617KB/s, maxb=158617KB/s, mint=1123822msec, maxt=1123822msec > warm: READ: io=102400MB, aggrb=131964KB/s, minb= 26392KB/s, maxb= 40164KB/s, mint= 522141msec, maxt= 794592msec > > real 19m22.671s > user 19m33.838s > sys 2m39.652s > > In both kernels, the hot set is propagated to the active list and then > served from cache for the duration of the workload. > > In both kernels, the beginning of the warm set is propagated to the > active list as well, but in the unpatched case the active list > eventually takes up half of memory and does not leave enough space > anymore for many new warm pages to get activated and so they start > thrashing while a significant part of the active list is now stale. > The patched kernel on the other hand constantly challenges the active > pages based on refaults and so manages to keep a cache window rolling > through the warm data set. This frees up IO bandwidth for the cold > set as well. > > For reference, this same test was performed with the traditional > demotion mechanism, where deactivation is coupled to inactive list > reclaim. However, this had the same outcome as the unpatched kernel: > while the warm set does indeed get activated continuously, it is > forced out of the active list by inactive list pressure, which is > dictated primarily by the unrelated cold set. The warm set is evicted > before subsequent streamers can benefit from it, even though there > would be enough space available to cache the pages of interest. > > Costs > > These patches increase struct inode by three words to manage shadow > entries in the page cache radix tree. However, given that a typical > inode (like the ext4 inode) is already 1k in size, this is not much. > It's a 2% size increase for a reclaimable object. fs_mark metadata > tests with millions of inodes did not show a measurable difference. > And as soon as there is any file data involved, the page cache pages > dominate the memory cost anyway. > > A much harder cost to estimate is the size of the page cache radix > tree. Page reclaim used to shrink the radix trees but now the tree > nodes are reused for shadow entries, and so the cost depends heavily > on the page cache access patterns. However, with workloads that > maintain spatial or temporal locality, the shadow entries are either > refaulted quickly or reclaimed along with the inode object itself. > Workloads that will experience a memory cost increase are those that > don't really benefit from caching in the first place. > > A more predictable alternative would be a fixed-cost separate pool of > shadow entries, but this would incur relatively higher memory cost for > well-behaved workloads at the benefit of cornercases. It would also > make the shadow entry lookup more costly compared to storing them > directly in the cache structure. > > The biggest impact on the existing VM fastpaths is an extra branch in > page cache lookups to filter out shadow entries. shmem already has > this check, though, since it stores swap entries alongside regular > pages inside its page cache radix trees. > > Future > > Right now we have a fixed ratio (50:50) between inactive and active > list but we already have complaints about working sets exceeding half > of memory being pushed out of the cache by simple used-once streaming > in the background. Ultimately, we want to adjust this ratio and allow > for a much smaller inactive list. These patches are an essential step > in this direction because they decouple the VMs ability to detect > working set changes from the inactive list size. This would allow us > to base the inactive list size on something more sensible, like the > combined readahead window size for example. > > Please consider merging. Thank you! > > fs/block_dev.c | 2 +- > fs/btrfs/compression.c | 2 +- > fs/cachefiles/rdwr.c | 33 +-- > fs/inode.c | 11 +- > fs/nfs/blocklayout/blocklayout.c | 2 +- > fs/nilfs2/inode.c | 4 +- > include/linux/fs.h | 2 + > include/linux/mm.h | 8 + > include/linux/mmzone.h | 6 + > include/linux/pagemap.h | 33 ++- > include/linux/pagevec.h | 3 + > include/linux/radix-tree.h | 5 +- > include/linux/shmem_fs.h | 1 + > include/linux/swap.h | 9 + > include/linux/writeback.h | 1 + > lib/radix-tree.c | 106 ++------ > mm/Makefile | 2 +- > mm/filemap.c | 335 +++++++++++++++++++++--- > mm/mincore.c | 20 +- > mm/page-writeback.c | 2 +- > mm/readahead.c | 6 +- > mm/shmem.c | 122 +++------ > mm/swap.c | 49 ++++ > mm/truncate.c | 78 ++++-- > mm/vmscan.c | 24 +- > mm/vmstat.c | 3 + > mm/workingset.c | 506 +++++++++++++++++++++++++++++++++++++ > -- To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
