Re: [PATCH v10 13/35] vmscan: per-node deferred work

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 06/06/2013 03:08 AM, Andrew Morton wrote:
> On Mon,  3 Jun 2013 23:29:42 +0400 Glauber Costa <glommer@xxxxxxxxxx> wrote:
> 
>> We already keep per-node LRU lists for objects being shrunk, but the
>> work that is deferred from one run to another is kept global. This
>> creates an impedance problem, where upon node pressure, work deferred
>> will accumulate and end up being flushed in other nodes.
> 
> This changelog would be more useful if it had more specificity.  Where
> do we keep these per-node LRU lists (names of variables?).  Where do we
> keep the global data?  In what function does this other-node flushing
> happen?
> 
> Generally so that readers can go and look at the data structures and
> functions which you're talking about.
> 
>> In large machines, many nodes can accumulate at the same time, all
>> adding to the global counter.
> 
> What global counter?
> 
>>  As we accumulate more and more, we start
>> to ask for the caches to flush even bigger numbers.
> 
> Where does this happen?
> 
>> The result is that
>> the caches are depleted and do not stabilize. To achieve stable steady
>> state behavior, we need to tackle it differently.
>>
>> In this patch we keep the deferred count per-node, and will never
>> accumulate that to other nodes.
>>
>> ...
>>
>> --- a/include/linux/shrinker.h
>> +++ b/include/linux/shrinker.h
>> @@ -19,6 +19,8 @@ struct shrink_control {
>>  
>>  	/* shrink from these nodes */
>>  	nodemask_t nodes_to_scan;
>> +	/* current node being shrunk (for NUMA aware shrinkers) */
>> +	int nid;
>>  };
>>  
>>  /*
>> @@ -42,6 +44,8 @@ struct shrink_control {
>>   * objects freed during the scan, or -1 if progress cannot be made due to
>>   * potential deadlocks. If -1 is returned, then no further attempts to call the
>>   * @scan_objects will be made from the current reclaim context.
>> + *
>> + * @flags determine the shrinker abilities, like numa awareness 
>>   */
>>  struct shrinker {
>>  	int (*shrink)(struct shrinker *, struct shrink_control *sc);
>> @@ -50,12 +54,34 @@ struct shrinker {
>>  
>>  	int seeks;	/* seeks to recreate an obj */
>>  	long batch;	/* reclaim batch size, 0 = default */
>> +	unsigned long flags;
>>  
>>  	/* These are for internal use */
>>  	struct list_head list;
>> -	atomic_long_t nr_in_batch; /* objs pending delete */
>> +	/*
>> +	 * We would like to avoid allocating memory when registering a new
>> +	 * shrinker.
> 
> That's quite surprising.  What are the reasons for this?
> 
>> 		 All shrinkers will need to keep track of deferred objects,
> 
> What is a deferred object and why does this deferral happen?
> 
>> +	 * and we need a counter for this. If the shrinkers are not NUMA aware,
>> +	 * this is a small and bounded space that fits into an atomic_long_t.
>> +	 * This is because that the deferring decisions are global, and we will
> 
> s/that//
> 
>> +	 * not allocate in this case.
>> +	 *
>> +	 * When the shrinker is NUMA aware, we will need this to be a per-node
>> +	 * array. Numerically speaking, the minority of shrinkers are NUMA
>> +	 * aware, so this saves quite a bit.
>> +	 */
> 
> I don't really understand what's going on here :(
> 

Ok. We need an array allocation for NUMA aware shrinkers, but we don't
need any for non NUMA-aware shrinkers. There is nothing wrong with the
memory allocation "per-se" , in terms of contexts, etc.

But in a NUMA *machine*, we would be allocating a lot of wasted memory
for creating arrays in shrinkers that are not NUMA capable at all.

Turns out, they seem to be the majority (at least so far).

Aside from the memory allocated, we still have all the useless loops and
cacheline dirtying. So I figured it would be useful to not make them all
NUMA aware if we can avoid it.


>> +	union {
>> +		/* objs pending delete */
>> +		atomic_long_t nr_deferred;
>> +		/* objs pending delete, per node */
>> +		atomic_long_t *nr_deferred_node;
>> +	};
>>  };
>>  #define DEFAULT_SEEKS 2 /* A good number if you don't know better. */
>> -extern void register_shrinker(struct shrinker *);
>> +
>> +/* Flags */
>> +#define SHRINKER_NUMA_AWARE (1 << 0)
>> +
>> +extern int register_shrinker(struct shrinker *);
>>  extern void unregister_shrinker(struct shrinker *);
>>  #endif
>> diff --git a/mm/vmscan.c b/mm/vmscan.c
>> index 53e647f..08eec9d 100644
>> --- a/mm/vmscan.c
>> +++ b/mm/vmscan.c
>> @@ -155,14 +155,36 @@ static unsigned long get_lru_size(struct lruvec *lruvec, enum lru_list lru)
>>  }
>>  
>>  /*
>> - * Add a shrinker callback to be called from the vm
>> + * Add a shrinker callback to be called from the vm.
>> + *
>> + * It cannot fail, unless the flag SHRINKER_NUMA_AWARE is specified.
>> + * With this flag set, this function will allocate memory and may fail.
>>   */
> 
> Again, I don't see what the big deal is with memory allocation. 
> register_shrinker() is pretty rare, is likely to happen when the system
> is under little stress and GFP_KERNEL is quite strong.  Why all the
> concern?
> 
>> -void register_shrinker(struct shrinker *shrinker)
>> +int register_shrinker(struct shrinker *shrinker)
>>  {
>> -	atomic_long_set(&shrinker->nr_in_batch, 0);
>> +	/*
>> +	 * If we only have one possible node in the system anyway, save
>> +	 * ourselves the trouble and disable NUMA aware behavior. This way we
>> +	 * will allocate nothing and save memory and some small loop time
>> +	 * later.
>> +	 */
>> +	if (nr_node_ids == 1)
>> +		shrinker->flags &= ~SHRINKER_NUMA_AWARE;
>> +
>> +	if (shrinker->flags & SHRINKER_NUMA_AWARE) {
>> +		size_t size;
>> +
>> +		size = sizeof(*shrinker->nr_deferred_node) * nr_node_ids;
>> +		shrinker->nr_deferred_node = kzalloc(size, GFP_KERNEL);
>> +		if (!shrinker->nr_deferred_node)
>> +			return -ENOMEM;
>> +	} else
>> +		atomic_long_set(&shrinker->nr_deferred, 0);
>> +
>>  	down_write(&shrinker_rwsem);
>>  	list_add_tail(&shrinker->list, &shrinker_list);
>>  	up_write(&shrinker_rwsem);
>> +	return 0;
>>  }
>>  EXPORT_SYMBOL(register_shrinker);
> 
> What would be the cost if we were to do away with SHRINKER_NUMA_AWARE
> and treat all shrinkers the same way?  The need to allocate extra
> memory per shrinker?  That sounds pretty cheap?
> 

Well, maybe I am just a little bit more frenetic about savings than you
are. There are quite a bunch of shrinkers.


>> @@ -186,6 +208,116 @@ static inline int do_shrinker_shrink(struct shrinker *shrinker,
>>  }
>>  
>>  #define SHRINK_BATCH 128
>> +
>> +static unsigned long
>> +shrink_slab_node(struct shrink_control *shrinkctl, struct shrinker *shrinker,
>> +		 unsigned long nr_pages_scanned, unsigned long lru_pages,
>> +		 atomic_long_t *deferred)
>> +{
>> +	unsigned long freed = 0;
>> +	unsigned long long delta;
>> +	long total_scan;
>> +	long max_pass;
>> +	long nr;
>> +	long new_nr;
>> +	long batch_size = shrinker->batch ? shrinker->batch
>> +					  : SHRINK_BATCH;
>> +
>> +	if (shrinker->scan_objects) {
>> +		max_pass = shrinker->count_objects(shrinker, shrinkctl);
>> +		WARN_ON(max_pass < 0);
>> +	} else
>> +		max_pass = do_shrinker_shrink(shrinker, shrinkctl, 0);
>> +	if (max_pass <= 0)
>> +		return 0;
>> +
>> +	/*
>> +	 * copy the current shrinker scan count into a local variable
>> +	 * and zero it so that other concurrent shrinker invocations
>> +	 * don't also do this scanning work.
>> +	 */
>> +	nr = atomic_long_xchg(deferred, 0);
> 
> This comment seems wrong.  It implies that "deferred" refers to "the
> current shrinker scan count".  But how are these two the same thing?  A
> "scan count" would refer to the number of objects to be scanned (or
> which were scanned - it's unclear).  Whereas "deferred" would refer to
> the number of those to-be-scanned objects which we didn't process and
> is hence less than or equal to the "scan count".
> 
> It's all very foggy :(  This whole concept of deferral needs more
> explanation, please.
> 

>> +	total_scan = nr;
>> +	delta = (4 * nr_pages_scanned) / shrinker->seeks;
>> +	delta *= max_pass;
>> +	do_div(delta, lru_pages + 1);
>> +	total_scan += delta;
>> +	if (total_scan < 0) {
>> +		printk(KERN_ERR
>> +		"shrink_slab: %pF negative objects to delete nr=%ld\n",
>> +		       shrinker->shrink, total_scan);
>> +		total_scan = max_pass;
>> +	}
>> +
>> +	/*
>> +	 * We need to avoid excessive windup on filesystem shrinkers
>> +	 * due to large numbers of GFP_NOFS allocations causing the
>> +	 * shrinkers to return -1 all the time. This results in a large
>> +	 * nr being built up so when a shrink that can do some work
>> +	 * comes along it empties the entire cache due to nr >>>
>> +	 * max_pass.  This is bad for sustaining a working set in
>> +	 * memory.
>> +	 *
>> +	 * Hence only allow the shrinker to scan the entire cache when
>> +	 * a large delta change is calculated directly.
>> +	 */
> 
> That was an important comment.  So the whole problem we're tackling
> here is fs shrinkers baling out in GFP_NOFS allocations?
> 
The main problem, yes. Not the whole.
The whole problem is shrinkers bailing out. For the fs shrinkers it
happens in GFP_NOFS allocations. For the other shrinkers, I have no idea.

But if they bail out, we'll defer the scan just the same.

--
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [Samba]     [Device Mapper]     [CEPH Development]
  Powered by Linux