SELinux has no maximum :-( Realistically there are a couple of interfaces that limit things to 4k, but labels on files on disk could be even larger than that! 255 will fit most every label, but not necessarily all of them. I know ext4 on Fedora allocates inodes which left about 255 bytes for selinux.selinux, but will place the xattr in another block if it happens to be larger than 255. This is rare, but certainly possible.... We use the inode->i_mode. In debug/error path we use: inode->i_sb inode->i_no We could use the parent dir sb instead of the new inode->i_sb. We don't have to print the i_no when we hit a failure, but it is just about the only information that can help for debugging/figuring out which file had a failure.. -Eric On Fri, Mar 1, 2013 at 9:07 AM, Mimi Zohar <zohar@xxxxxxxxxxxxxxxxxx> wrote: > On Fri, 2013-03-01 at 13:11 +0000, Steven Whitehouse wrote: >> Hi, >> >> On Fri, 2013-03-01 at 07:27 -0500, Mimi Zohar wrote: >> > On Fri, 2013-03-01 at 10:12 +0000, Steven Whitehouse wrote: >> > > Hi, >> > > >> > > I'm wondering whether there is a list somewhere of fields which >> > > security_inode_init_security() requires are set in an inode when it is >> > > called? In particular, does it matter if the inode number itself is >> > > unset when security_inode_init_security() is called? >> > > >> > > The problem that I'm looking at is the use of multiple transactions >> > > during inode creation when some combination of ACLs/LSMs/IMA are turned >> > > on. What we have currently (in GFS2, there are other fs which follow >> > > broadly the same solution though) is this: >> > > >> > > 1. Create inode in core >> > > 2. Create inode on disk >> > > 3. Add xattrs one at a time for ACLs/LSMs/IMA >> > > 4. Link inode into directory >> > > >> > > Steps 2 through 4 require separate transactions at the moment. What I'd >> > > like to do is to be able to get the details of the xattrs ahead of time >> > > such that the allocation of the inode can be one and the same allocation >> > > as that for the xattr blocks. That allows merging of the transactions >> > > into one and a greatly simplified error path too. This would look >> > > something like: >> > > >> > > 1. Create in-core inode and init required fields >> > > 2. Get details of all xattrs for the inode >> > > 3. Alloc on disk inode and blocks for xattrs as needed >> > > 4. Link into directory >> > > >> > > In this case, steps 2 through 4 are within a single transaction. We >> > > don't actually need to have the content of the xattrs ahead of >> > > allocating the inode, just the length (or even just a max length, if it >> > > is not too large). However the easiest solution would just be to move >> > > the call to security_inode_init_security() to the point before we've >> > > allocated the inode (and thus we don't know its number yet) but after >> > > we've filled out all the remaining fields if that makes sense? >> > > >> > > So I just wanted to check whether that would break anything, >> > >> > Hi Steve, >> > >> > Included in security_inode_init_security() is the call to >> > evm_inode_init_security() to write the 'security.evm' extended >> > attribute. 'security.evm' is an HMAC of the security extended >> > attributes and other file metadata, including the inode. For an exact >> > list of other metadata included in the HMAC calculation refer to >> > hmac_add_misc(). (The UUID is being added to the HMAC calculation in >> > this open window.) >> > >> > thanks, >> > >> > Mimi >> > >> >> Ok... but it is using inode->i_ino in that case, as well as the >> generation number too. So that presumably can only be done after the >> inode has been allocated, since we need to know its location in order to >> know its inode number. Also the generation number is assigned at >> allocation time. One potential issue though... the inode->i_ino is an >> unsigned long, so that on 32 bit archs, that will be (on GFS2) a >> truncated version of the full 64 bit inode number. I'm not sure if that >> matters or not for EVM. > > The reason for adding additional information to the HMAC calculation is > to prevent a cut & paste attack, taking a valid 'security.evm' from one > file and using it for another file. > >> So since that appears to rule out doing the security init bits ahead of >> the allocation of the inode, is it possible to get a maximum value for >> the size of the xattr which EVM will add? Likewise for the other LSMs >> too? > > Although 'security.evm' can contain either an HMAC or a digital > signature, new inodes are created with an HMAC, which is hardcoded as > hmac(sha1). On a running system, the existing 'security.evm' digital > signatures are replaced with an HMAC. > > SELinux defines INITCONTEXTLEN as 255, which seems to be the maximum > xattr length, but I'm not sure. From the smack header: > > /* > * Smack labels were limited to 23 characters for a long time. > */ > #define SMK_LABELLEN 24 > #define SMK_LONGLABEL 256 > > thanks, > > Mimi > > -- > To unsubscribe from this list: send the line "unsubscribe linux-security-module" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html