[patch|rfc] block: don't mark buffers beyond end of disk as mapped

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

We have a bug report open where a squashfs image mounted on ppc64 would
exhibit errors due to trying to read beyond the end of the disk.  It can
easily be reproduced by doing the following:

[root@ibm-p750e-02-lp3 ~]# ls -l install.img
-rw-r--r-- 1 root root 142032896 Apr 30 16:46 install.img
[root@ibm-p750e-02-lp3 ~]# mount -o loop ./install.img /mnt/test
[root@ibm-p750e-02-lp3 ~]# dd if=/dev/loop0 of=/dev/null 
dd: reading `/dev/loop0': Input/output error
277376+0 records in
277376+0 records out
142016512 bytes (142 MB) copied, 0.9465 s, 150 MB/s

In dmesg, you'll find the following:

squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   43.106012] attempt to access beyond end of device
[   43.106029] loop0: rw=0, want=277410, limit=277408
[   43.106039] Buffer I/O error on device loop0, logical block 138704
[   43.106053] attempt to access beyond end of device
[   43.106057] loop0: rw=0, want=277412, limit=277408
[   43.106061] Buffer I/O error on device loop0, logical block 138705
[   43.106066] attempt to access beyond end of device
[   43.106070] loop0: rw=0, want=277414, limit=277408
[   43.106073] Buffer I/O error on device loop0, logical block 138706
[   43.106078] attempt to access beyond end of device
[   43.106081] loop0: rw=0, want=277416, limit=277408
[   43.106085] Buffer I/O error on device loop0, logical block 138707
[   43.106089] attempt to access beyond end of device
[   43.106093] loop0: rw=0, want=277418, limit=277408
[   43.106096] Buffer I/O error on device loop0, logical block 138708
[   43.106101] attempt to access beyond end of device
[   43.106104] loop0: rw=0, want=277420, limit=277408
[   43.106108] Buffer I/O error on device loop0, logical block 138709
[   43.106112] attempt to access beyond end of device
[   43.106116] loop0: rw=0, want=277422, limit=277408
[   43.106120] Buffer I/O error on device loop0, logical block 138710
[   43.106124] attempt to access beyond end of device
[   43.106128] loop0: rw=0, want=277424, limit=277408
[   43.106131] Buffer I/O error on device loop0, logical block 138711
[   43.106135] attempt to access beyond end of device
[   43.106139] loop0: rw=0, want=277426, limit=277408
[   43.106143] Buffer I/O error on device loop0, logical block 138712
[   43.106147] attempt to access beyond end of device
[   43.106151] loop0: rw=0, want=277428, limit=277408
[   43.106154] Buffer I/O error on device loop0, logical block 138713
[   43.106158] attempt to access beyond end of device
[   43.106162] loop0: rw=0, want=277430, limit=277408
[   43.106166] attempt to access beyond end of device
[   43.106169] loop0: rw=0, want=277432, limit=277408
...
[   43.106307] attempt to access beyond end of device
[   43.106311] loop0: rw=0, want=277470, limit=2774

What's strange is that the same messages aren't output when mounting an
ext2, 3, or 4 image of the same size.  Digging into this, I found that
squashfs manages to read in the end block(s) of the disk during the
mount operation.  That leads to block_read_full_page being called with
buffers that are beyond end of disk, but are marked as mapped.  Thus, it
would end up submitting read I/O against them, resulting in the errors
mentioned above.  I fixed the problem by modifying init_page_buffers to
only set the buffer mapped if it fell inside of i_size.  Since I haven't
fully explained the reason that extN does not hit this problem, I'm
proposing this as an RFC, though it does look like a good fix to me.

Comments would be appreciated.

Cheers,
Jeff

Signed-off-by: Jeff Moyer <jmoyer@xxxxxxxxxx>

diff --git a/fs/buffer.c b/fs/buffer.c
index 351e18e..b3d6a97 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -921,6 +921,8 @@ init_page_buffers(struct page *page, struct block_device *bdev,
 	struct buffer_head *head = page_buffers(page);
 	struct buffer_head *bh = head;
 	int uptodate = PageUptodate(page);
+	struct inode *inode = bdev->bd_inode;
+	sector_t last_block = (i_size_read(inode) - 1) >> inode->i_blkbits;
 
 	do {
 		if (!buffer_mapped(bh)) {
@@ -929,7 +931,8 @@ init_page_buffers(struct page *page, struct block_device *bdev,
 			bh->b_blocknr = block;
 			if (uptodate)
 				set_buffer_uptodate(bh);
-			set_buffer_mapped(bh);
+			if (block <= last_block)
+				set_buffer_mapped(bh);
 		}
 		block++;
 		bh = bh->b_this_page;
--
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [Samba]     [Device Mapper]     [CEPH Development]
  Powered by Linux