Hi Chris, the last one was borked :) Please check this one. -jacek 2012/2/29 Jacek Luczak <difrost.kernel@xxxxxxxxx>: > Hi All, > > /*Sorry for sending incomplete email, hit wrong button :) I guess I > can't use Gmail */ > > Long story short: We've found that operations on a directory structure > holding many dirs takes ages on ext4. > > The Question: Why there's that huge difference in ext4 and btrfs? See > below test results for real values. > > Background: I had to backup a Jenkins directory holding workspace for > few projects which were co from svn (implies lot of extra .svn dirs). > The copy takes lot of time (at least more than I've expected) and > process was mostly in D (disk sleep). I've dig more and done some > extra test to see if this is not a regression on block/fs site. To > isolate the issue I've also performed same tests on btrfs. > > Test environment configuration: > 1) HW: HP ProLiant BL460 G6, 48 GB of memory, 2x 6 core Intel X5670 HT > enabled, Smart Array P410i, RAID 1 on top of 2x 10K RPM SAS HDDs. > 2) Kernels: All tests were done on following kernels: > - 2.6.39.4-3 -- the build ID (3) is used here for internal tacking of > config changes mostly. In -3 we've introduced ,,fix readahead pipeline > break caused by block plug'' patch. Otherwise it's pure 2.6.39.4. > - 3.2.7 -- latest kernel at the time of testing (3.2.8 has been > release recently). > 3) A subject of tests, directory holding: > - 54GB of data (measured on ext4) > - 1978149 files > - 844008 directories > 4) Mount options: > - ext4 -- errors=remount-ro,noatime, > data=writeback > - btrfs -- noatime,nodatacow and for later investigation on > copression effect: noatime,nodatacow,compress=lzo > > In all tests I've been measuring time of execution. Following tests > were performed: > - find . -type d > - find . -type f > - cp -a > - rm -rf > > Ext4 results: > | Type | 2.6.39.4-3 | 3.2.7 > | Dir cnt | 17m 40sec | 11m 20sec > | File cnt | 17m 36sec | 11m 22sec > | Copy | 1h 28m | 1h 27m > | Remove| 3m 43sec | 3m 38sec > > Btrfs results (without lzo comression): > | Type | 2.6.39.4-3 | 3.2.7 > | Dir cnt | 2m 22sec | 2m 21sec > | File cnt | 2m 26sec | 2m 23sec > | Copy | 36m 22sec | 39m 35sec > | Remove| 7m 51sec | 10m 43sec > > From above one can see that copy takes close to 1h less on btrfs. I've > done strace counting times of calls, results are as follows (from > 3.2.7): > 1) Ext4 (only to elements): > % time seconds usecs/call calls errors syscall > ------ ----------- ----------- --------- --------- ---------------- > 57.01 13.257850 1 15082163 read > 23.40 5.440353 3 1687702 getdents > 6.15 1.430559 0 3672418 lstat > 3.80 0.883767 0 13106961 write > 2.32 0.539959 0 4794099 open > 1.69 0.393589 0 843695 mkdir > 1.28 0.296700 0 5637802 setxattr > 0.80 0.186539 0 7325195 stat > > 2) Btrfs: > % time seconds usecs/call calls errors syscall > ------ ----------- ----------- --------- --------- ---------------- > 53.38 9.486210 1 15179751 read > 11.38 2.021662 1 1688328 getdents > 10.64 1.890234 0 4800317 open > 6.83 1.213723 0 13201590 write > 4.85 0.862731 0 5644314 setxattr > 3.50 0.621194 1 844008 mkdir > 2.75 0.489059 0 3675992 1 lstat > 1.71 0.303544 0 5644314 llistxattr > 1.50 0.265943 0 1978149 utimes > 1.02 0.180585 0 5644314 844008 getxattr > > On btrfs getdents takes much less time which prove the bottleneck in > copy time on ext4 is this syscall. In 2.6.39.4 it shows even less time > for getdents: > % time seconds usecs/call calls errors syscall > ------ ----------- ----------- --------- --------- ---------------- > 50.77 10.978816 1 15033132 read > 14.46 3.125996 1 4733589 open > 7.15 1.546311 0 5566988 setxattr > 5.89 1.273845 0 3626505 lstat > 5.81 1.255858 1 1667050 getdents > 5.66 1.224403 0 13083022 write > 3.40 0.735114 1 833371 mkdir > 1.96 0.424881 0 5566988 llistxattr > > > Why so huge difference in the getdents timings? > > -Jacek -- To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
