Hello,
I've converted a 1,5TB SATA drive to IDE to run it on a UDMA100 IDE controller.
Low traffic applications work well. I'm able to create a xfs or ext4 filesystem
and even a fsck runs without problems and without causing error messages on dmesg.
If I start to copy a file with some gigabytes in size to the new disc, then
errors like the following keep coming on dmesg:
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: failed command: WRITE DMA EXT
ata2.00: cmd 35/00:00:30:07:8a/00:04:57:00:00/e0 tag 0 dma 524288 out
res 40/00:ff:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2: link is slow to respond, please be patient (ready=0)
ata2: device not ready (errno=-16), forcing hardreset
ata2: soft resetting link
ata2.00: configured for UDMA/25
ata2.00: device reported invalid CHS sector 0
ata2: EH complete
The error repeats many times.
Copying a big file from this disc to another location on the disc, then this
also works without errors (maybe because of the slow down of the mixed
read/write access). This copy from disc to same disc also failed before I
switched the disc to SATA I mode. This is done now, but doesn't seem to fix copy
from another disc to the new one.
Interesting thing is that always WRITE DMA EXT seems to fail. Is there any way
to fix this? Maybe it would be a option to increase the timeout, that gets
triggered here, so the driver waits longer for the result?
What I definetly need is some workaround to stop the kernel from speeding down
until UDMA/25 is reached. This speed is totally unacceptable for such a big
drive... :-(
Are there configuration parameters that change how the driver behaves in such
situations and how to set them to get around this problem?
Thank you very much in advance for any help...
Yours
Manuel
--
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
