[RFC][PATCH v7 14/14] memcg: check memcg dirty limits in page writeback

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



If the current process is in a non-root memcg, then
balance_dirty_pages() will consider the memcg dirty limits as well as
the system-wide limits.  This allows different cgroups to have distinct
dirty limits which trigger direct and background writeback at different
levels.

If called with a mem_cgroup, then throttle_vm_writeout() queries the
given cgroup for its dirty memory usage limits.

Signed-off-by: Andrea Righi <arighi@xxxxxxxxxxx>
Signed-off-by: Greg Thelen <gthelen@xxxxxxxxxx>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@xxxxxxxxxxxxxx>
Acked-by: Wu Fengguang <fengguang.wu@xxxxxxxxx>
---
Changelog since v6:
- Adapt to new mem_cgroup_hierarchical_dirty_info() parameters: it no longer
  takes a background/foreground parameter.
- Trivial comment reword.

Changelog since v5:
- Simplified this change by using mem_cgroup_balance_dirty_pages() rather than
  cramming the somewhat different logic into balance_dirty_pages().  This means
  the global (non-memcg) dirty limits are not passed around in the
  struct dirty_info, so there's less change to existing code.

Changelog since v4:
- Added missing 'struct mem_cgroup' forward declaration in writeback.h.
- Made throttle_vm_writeout() memcg aware.
- Removed previously added dirty_writeback_pages() which is no longer needed.
- Added logic to balance_dirty_pages() to throttle if over foreground memcg
  limit.

Changelog since v3:
- Leave determine_dirtyable_memory() static.  v3 made is non-static.
- balance_dirty_pages() now considers both system and memcg dirty limits and
  usage data.  This data is retrieved with global_dirty_info() and
  memcg_dirty_info().  

 include/linux/writeback.h |    3 ++-
 mm/page-writeback.c       |   35 +++++++++++++++++++++++++++++------
 mm/vmscan.c               |    2 +-
 3 files changed, 32 insertions(+), 8 deletions(-)

diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index 4f5c0d2..0b4b851 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -8,6 +8,7 @@
 #include <linux/fs.h>
 
 struct backing_dev_info;
+struct mem_cgroup;
 
 /*
  * fs/fs-writeback.c
@@ -91,7 +92,7 @@ void laptop_mode_timer_fn(unsigned long data);
 #else
 static inline void laptop_sync_completion(void) { }
 #endif
-void throttle_vm_writeout(gfp_t gfp_mask);
+void throttle_vm_writeout(gfp_t gfp_mask, struct mem_cgroup *mem_cgroup);
 
 /* These are exported to sysctl. */
 extern int dirty_background_ratio;
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 62fcf3d..30c265b 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -473,7 +473,8 @@ unsigned long bdi_dirty_limit(struct backing_dev_info *bdi, unsigned long dirty)
  * data.  It looks at the number of dirty pages in the machine and will force
  * the caller to perform writeback if the system is over `vm_dirty_ratio'.
  * If we're over `background_thresh' then the writeback threads are woken to
- * perform some writeout.
+ * perform some writeout.  The current task may belong to a cgroup with
+ * dirty limits, which are also checked.
  */
 static void balance_dirty_pages(struct address_space *mapping,
 				unsigned long write_chunk)
@@ -488,6 +489,8 @@ static void balance_dirty_pages(struct address_space *mapping,
 	bool dirty_exceeded = false;
 	struct backing_dev_info *bdi = mapping->backing_dev_info;
 
+	mem_cgroup_balance_dirty_pages(mapping, write_chunk);
+
 	for (;;) {
 		struct writeback_control wbc = {
 			.sync_mode	= WB_SYNC_NONE,
@@ -651,23 +654,43 @@ void balance_dirty_pages_ratelimited_nr(struct address_space *mapping,
 }
 EXPORT_SYMBOL(balance_dirty_pages_ratelimited_nr);
 
-void throttle_vm_writeout(gfp_t gfp_mask)
+/*
+ * Throttle the current task if it is near dirty memory usage limits.  Both
+ * global dirty memory limits and (if @mem_cgroup is given) per-cgroup dirty
+ * memory limits are checked.
+ *
+ * If near limits, then wait for usage to drop.  Dirty usage should drop because
+ * dirty producers should have used balance_dirty_pages(), which would have
+ * scheduled writeback.
+ */
+void throttle_vm_writeout(gfp_t gfp_mask, struct mem_cgroup *mem_cgroup)
 {
 	unsigned long background_thresh;
 	unsigned long dirty_thresh;
+	struct dirty_info memcg_info;
+	bool do_memcg;
 
         for ( ; ; ) {
 		global_dirty_limits(&background_thresh, &dirty_thresh);
+		do_memcg = mem_cgroup &&
+			mem_cgroup_hierarchical_dirty_info(
+				determine_dirtyable_memory(), mem_cgroup,
+				&memcg_info);
 
                 /*
                  * Boost the allowable dirty threshold a bit for page
                  * allocators so they don't get DoS'ed by heavy writers
                  */
                 dirty_thresh += dirty_thresh / 10;      /* wheeee... */
-
-                if (global_page_state(NR_UNSTABLE_NFS) +
-			global_page_state(NR_WRITEBACK) <= dirty_thresh)
-                        	break;
+		if (do_memcg)
+			memcg_info.dirty_thresh += memcg_info.dirty_thresh / 10;
+
+		if ((global_page_state(NR_UNSTABLE_NFS) +
+		     global_page_state(NR_WRITEBACK) <= dirty_thresh) &&
+		    (!do_memcg ||
+		     (memcg_info.nr_unstable_nfs +
+		      memcg_info.nr_writeback <= memcg_info.dirty_thresh)))
+			break;
                 congestion_wait(BLK_RW_ASYNC, HZ/10);
 
 		/*
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 292582c..66324a4 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1953,7 +1953,7 @@ restart:
 					sc->nr_scanned - nr_scanned, sc))
 		goto restart;
 
-	throttle_vm_writeout(sc->gfp_mask);
+	throttle_vm_writeout(sc->gfp_mask, sc->mem_cgroup);
 }
 
 /*
-- 
1.7.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [Samba]     [Device Mapper]     [CEPH Development]
  Powered by Linux