Re: [RFC][PATCH] Re: [BUG] ext4: cannot unfreeze a filesystem due to a deadlock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 04/22/2011 05:40 PM, Jan Kara wrote:
>   Hello,
> 
> On Fri 22-04-11 17:26:07, Peter M. Petrakis wrote:
>> On 04/22/2011 02:58 AM, Toshiyuki Okajima wrote:
>>> On Tue, 19 Apr 2011 18:43:16 +0900
>>> I have confirmed that the following patch works fine while my or
>>> Mizuma-san's reproducer is running. Therefore,
>>>  we can block to write the data, which is mmapped to a file, into a disk
>>> by a page-fault while fsfreezing. 
>>>
>>> I think this patch fixes the following two problems:
>>> - A deadlock occurs between ext4_da_writepages() (called from
>>> writeback_inodes_wb) and thaw_super(). (reported by Mizuma-san)
>>> - We can also write the data, which is mmapped to a file,
>>>   into a disk while fsfreezing (ext3/ext4).
>>>                                        (reported by me)
>>>
>>> Please examine this patch.
>>
>> We've recently identified the same root cause in 2.6.32 though the hit rate
>> is much much higher. The configuration is a SAN ALUA Active/Standby using
>> multipath. The s_wait_unfrozen/s_umount deadlock is regularly encountered
>> when a path comes back into service, as a result of a kpartx invocation on
>> behalf of this udev rule.
>>
>> /lib/udev/rules.d/95-kpartx.rules
>>
>> # Create dm tables for partitions
>> ENV{DM_STATE}=="ACTIVE", ENV{DM_UUID}=="mpath-*", \
>>         RUN+="/sbin/dmsetup ls --target multipath --exec '/sbin/kpartx -a -p -part' -j %M -m %m"
>   Hmm, I don't think this is the same problem... See:

Figures :)

 
>> [ 1898.017614] mptsas: ioc0: mptsas_add_fw_event: add (fw_event=0xffff880c3c815200)
>> [ 1898.025995] mptsas: ioc0: mptsas_free_fw_event: kfree (fw_event=0xffff880c3c814780)
>> [ 1898.034625] mptsas: ioc0: mptsas_firmware_event_work: fw_event=(0xffff880c3c814b40), event = (0x12)
>> [ 1898.044803] mptsas: ioc0: mptsas_free_fw_event: kfree (fw_event=0xffff880c3c814b40)
>> [ 1898.053475] mptsas: ioc0: mptsas_firmware_event_work: fw_event=(0xffff880c3c815c80), event = (0x12)
>> [ 1898.063690] mptsas: ioc0: mptsas_free_fw_event: kfree (fw_event=0xffff880c3c815c80)
>> [ 1898.072316] mptsas: ioc0: mptsas_firmware_event_work: fw_event=(0xffff880c3c815200), event = (0x0f)
>> [ 1898.082544] mptsas: ioc0: mptsas_free_fw_event: kfree (fw_event=0xffff880c3c815200)
>> [ 1898.571426] sd 0:0:1:0: alua: port group 01 state S supports toluSnA
>> [ 1898.578635] device-mapper: multipath: Failing path 8:32.
>> [ 2041.345645] INFO: task kjournald:595 blocked for more than 120 seconds.
>> [ 2041.353075] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>> [ 2041.361891] kjournald       D ffff88063acb9a90     0   595      2 0x00000000
>> [ 2041.369891]  ffff88063ace1c30 0000000000000046 ffff88063c282140 ffff880600000000
>> [ 2041.378416]  0000000000013cc0 ffff88063acb96e0 ffff88063acb9a90 ffff88063ace1fd8
>> [ 2041.386954]  ffff88063acb9a98 0000000000013cc0 ffff88063ace0010 0000000000013cc0
>>
>> [ 2041.395561] Call Trace:
>> [ 2041.398358]  [<ffffffff81192380>] ? sync_buffer+0x0/0x50
>> [ 2041.404342]  [<ffffffff815d3120>] io_schedule+0x70/0xc0
>> [ 2041.410227]  [<ffffffff811923c5>] sync_buffer+0x45/0x50
>> [ 2041.416179]  [<ffffffff815d378f>] __wait_on_bit+0x5f/0x90
>> [ 2041.422258]  [<ffffffff81192380>] ? sync_buffer+0x0/0x50
>> [ 2041.428275]  [<ffffffff815d3838>] out_of_line_wait_on_bit+0x78/0x90
>> [ 2041.435324]  [<ffffffff81086b90>] ? wake_bit_function+0x0/0x40
>> [ 2041.441958]  [<ffffffff8119237e>] __wait_on_buffer+0x2e/0x30
>> [ 2041.448333]  [<ffffffff8123ab14>] journal_commit_transaction+0x7e4/0xec0
>   So kjournald is committing a transaction and waiting for IO to complete.
> Which maybe never happens because of multipath being in transition? That
> would be a bug...
>

and it would be a new one for us. It's entirely possible the original deadlock
is resolved, and this is new. With only the tracebacks to consult, and general
unfamiliarity with this area, it looked like the same fault to me.
In 2.6.32 it's a dead ringer per the thread parent:

http://permalink.gmane.org/gmane.comp.file-systems.ext4/23171

[Ubuntu 10.04 - 2.6.32 crashdump]

crash-5.0> ps | grep UN
    992      2   7  ffff8802678a8000  UN   0.0       0      0  [flush-251:5]
  17295   2537   2  ffff880267be0000  UN   0.2   47060  17368  iozone
  17314   2477   5  ffff88026a952010  UN   0.2   47060  17364  iozone
  17447   2573   0  ffff880268bd2010  UN   0.2   47060  17340  iozone
  17460      1  13  ffff88026b3c4020  UN   0.0  191564   1992  rsyslogd
  17606  17597  15  ffff880268420000  UN   0.0   10436    808  kpartx
  17738   2268  13  ffff88016908a010  UN   0.0   17756   1616  dhclient-script
  17747   2223  15  ffff88026a950000  UN   0.0  151460   1596  multipathd
  17748   2284   1  ffff88016908c020  UN   0.0   49260    688  sshd
  17749   2284   1  ffff880169088000  UN   0.0   49260    692  sshd
  17750   2284   1  ffff88016a628000  UN   0.0   49260    688  sshd
  17751   2284   0  ffff88026a3cc020  UN   0.0   49260    688  sshd
  17752   2284   0  ffff88026a3ca010  UN   0.0   49260    688  sshd
  17753   2284   0  ffff88026a3c8000  UN   0.0   49260    688  sshd
  17754   2284   0  ffff880268f60000  UN   0.0   49260    692  sshd
  17755   2284   0  ffff880268f62010  UN   0.0   49260    688  sshd
crash-5.0> bt 17606
PID: 17606  TASK: ffff880268420000  CPU: 15  COMMAND: "kpartx"
 #0 [ffff88026aac3b18] schedule at ffffffff8158bcbd
 #1 [ffff88026aac3bd0] rwsem_down_failed_common at ffffffff8158df2d
 #2 [ffff88026aac3c30] rwsem_down_write_failed at ffffffff8158e0b3
 #3 [ffff88026aac3c70] call_rwsem_down_write_failed at ffffffff812d9903
 #4 [ffff88026aac3ce0] thaw_bdev at ffffffff81186d5a
 #5 [ffff88026aac3d40] unlock_fs at ffffffff8145e46d
 #6 [ffff88026aac3d60] dm_resume at ffffffff8145fb38
 #7 [ffff88026aac3db0] do_resume at ffffffff81465c98
 #8 [ffff88026aac3de0] dev_suspend at ffffffff81465d65
 #9 [ffff88026aac3e20] ctl_ioctl at ffffffff814665f5
#10 [ffff88026aac3e90] dm_ctl_ioctl at ffffffff814666a3
#11 [ffff88026aac3ea0] vfs_ioctl at ffffffff81165e92
#12 [ffff88026aac3ee0] do_vfs_ioctl at ffffffff81166140
#13 [ffff88026aac3f30] sys_ioctl at ffffffff811664b1
#14 [ffff88026aac3f80] system_call_fastpath at ffffffff810131b2
    RIP: 00007fa798b04197  RSP: 00007fff4cf1c6e8  RFLAGS: 00010202
    RAX: 0000000000000010  RBX: ffffffff810131b2  RCX: 0000000000000000
    RDX: 0000000000bcf310  RSI: 00000000c138fd06  RDI: 0000000000000004
    RBP: 0000000000bcf340   R8: 00007fa798dc2528   R9: 00007fff4cf1c640
    R10: 00007fa798dc1dc0  R11: 0000000000000246  R12: 00007fa798dc1dc0
    R13: 0000000000004000  R14: 0000000000bce0f0  R15: 00007fa798dc1dc0
    ORIG_RAX: 0000000000000010  CS: 0033  SS: 002b
crash-5.0> bt 992

PID: 992    TASK: ffff8802678a8000  CPU: 7   COMMAND: "flush-251:5"
 #0 [ffff880267bddb00] schedule at ffffffff8158bcbd
 #1 [ffff880267bddbb8] ext4_force_commit at ffffffff8120b16d
 #2 [ffff880267bddc18] ext4_write_inode at ffffffff811f29e5
 #3 [ffff880267bddc68] writeback_single_inode at ffffffff81178964
 #4 [ffff880267bddcb8] writeback_sb_inodes at ffffffff81178f09
 #5 [ffff880267bddd18] wb_writeback at ffffffff8117995c
 #6 [ffff880267bdddc8] wb_do_writeback at ffffffff81179b6b
 #7 [ffff880267bdde58] bdi_writeback_task at ffffffff81179cc3
 #8 [ffff880267bdde98] bdi_start_fn at ffffffff8111e816
 #9 [ffff880267bddec8] kthread at ffffffff81088a06
#10 [ffff880267bddf48] kernel_thread at ffffffff810142ea

crash-5.0> super_block.s_frozen ffff880268a4e000
  s_frozen = 0x2,

int ext4_force_commit(struct super_block *sb)
{
        journal_t *journal;
        int ret = 0;

        if (sb->s_flags & MS_RDONLY)
                return 0;

        journal = EXT4_SB(sb)->s_journal;
        if (journal) {
                vfs_check_frozen(sb, SB_FREEZE_TRANS); <=== this is where sleep
                ret = ext4_journal_force_commit(journal);
        }

        return ret;
}
 

I have tried the previous versions of the patch, backporting
to 2.6.32 without any success. I thought I would just go for it
this time with the latest.

 
>> [ 2041.670669] multipathd      D ffff88063e3303b0     0  1337      1 0x00000000
>> [ 2041.678746]  ffff88063c0fda18 0000000000000082 0000000000000000 ffff880600000000
>> [ 2041.687219]  0000000000013cc0 ffff88063e330000 ffff88063e3303b0 ffff88063c0fdfd8
>> [ 2041.695818]  ffff88063e3303b8 0000000000013cc0 ffff88063c0fc010 0000000000013cc0
>> [ 2041.704369] Call Trace:
>> [ 2041.707128]  [<ffffffff815d349d>] schedule_timeout+0x21d/0x300
>> [ 2041.713679]  [<ffffffff8104c8ec>] ? resched_task+0x2c/0x90
>> [ 2041.719846]  [<ffffffff8105f763>] ? try_to_wake_up+0xc3/0x410
>> [ 2041.726301]  [<ffffffff815d2436>] wait_for_common+0xd6/0x180
>> [ 2041.732685]  [<ffffffff8105fb05>] ? wake_up_process+0x15/0x20
>> [ 2041.739138]  [<ffffffff8105fab0>] ? default_wake_function+0x0/0x20
>> [ 2041.746079]  [<ffffffff815d25bd>] wait_for_completion+0x1d/0x20
>> [ 2041.752716]  [<ffffffff8107de18>] call_usermodehelper_exec+0xd8/0xe0
>> [ 2041.759853]  [<ffffffff814a3110>] ? parse_hw_handler+0xb0/0x240
>> [ 2041.766503]  [<ffffffff8107e060>] __request_module+0x190/0x210
>> [ 2041.773054]  [<ffffffff812e0c28>] ? sscanf+0x38/0x40
>> [ 2041.778636]  [<ffffffff814a3110>] parse_hw_handler+0xb0/0x240
>> [ 2041.785121]  [<ffffffff814a38c3>] multipath_ctr+0x83/0x1d0
>> [ 2041.791312]  [<ffffffff8149abd5>] ? dm_split_args+0x75/0x140
>> [ 2041.797671]  [<ffffffff8149b9af>] dm_table_add_target+0xff/0x250
>> [ 2041.804413]  [<ffffffff8149de3a>] table_load+0xca/0x2f0
>> [ 2041.810317]  [<ffffffff8149dd70>] ? table_load+0x0/0x2f0
>> [ 2041.816316]  [<ffffffff8149f0d5>] ctl_ioctl+0x1a5/0x240
>> [ 2041.822184]  [<ffffffff8149f183>] dm_ctl_ioctl+0x13/0x20
>> [ 2041.828188]  [<ffffffff81175245>] do_vfs_ioctl+0x95/0x3c0
>> [ 2041.834250]  [<ffffffff8109ae6b>] ? sys_futex+0x7b/0x170
>> [ 2041.840219]  [<ffffffff81175611>] sys_ioctl+0xa1/0xb0
>> [ 2041.845898]  [<ffffffff8100c042>] system_call_fastpath+0x16/0x1b
>   multipathd is hung waiting for module to be loaded? How come?

It shouldn't, dh_alua is already loaded. 


>> [ 2041.964575] INFO: task kpartx:1897 blocked for more than 120 seconds.
>> [ 2041.971801] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>> [ 2041.980626] kpartx          D ffff88063d05df30     0  1897   1896 0x00000000
>> [ 2041.988607]  ffff88063c3a5b58 0000000000000082 0000000e3c3a5ac8 ffff880c00000000
>> [ 2041.997056]  0000000000013cc0 ffff88063d05db80 ffff88063d05df30 ffff88063c3a5fd8
>> [ 2042.005496]  ffff88063d05df38 0000000000013cc0 ffff88063c3a4010 0000000000013cc0
>> [ 2042.013939] Call Trace:
>> [ 2042.016702]  [<ffffffff8123dc85>] log_wait_commit+0xc5/0x150
>> [ 2042.023089]  [<ffffffff81086b50>] ? autoremove_wake_function+0x0/0x40
>> [ 2042.030321]  [<ffffffff815d4eee>] ? _raw_spin_lock+0xe/0x20
>> [ 2042.036584]  [<ffffffff811e6256>] ext3_sync_fs+0x66/0x70
>> [ 2042.042552]  [<ffffffff811ba7c1>] dquot_quota_sync+0x1c1/0x330
>> [ 2042.049133]  [<ffffffff81115391>] ? do_writepages+0x21/0x40
>> [ 2042.055423]  [<ffffffff8110ae8b>] ? __filemap_fdatawrite_range+0x5b/0x60
>> [ 2042.062944]  [<ffffffff8118f42c>] __sync_filesystem+0x3c/0x90
>> [ 2042.069430]  [<ffffffff8118f56b>] sync_filesystem+0x4b/0x70
>> [ 2042.075690]  [<ffffffff81166a85>] freeze_super+0x55/0x100
>> [ 2042.081754]  [<ffffffff811993b8>] freeze_bdev+0x98/0xe0
>> [ 2042.087625]  [<ffffffff81499001>] dm_suspend+0xa1/0x2e0
>> [ 2042.093495]  [<ffffffff8149ced9>] ? __get_name_cell+0x99/0xb0
>> [ 2042.099948]  [<ffffffff8149e2d0>] ? dev_suspend+0x0/0xb0
>> [ 2042.105916]  [<ffffffff8149e29b>] do_resume+0x17b/0x1b0
>> [ 2042.111784]  [<ffffffff8149e2d0>] ? dev_suspend+0x0/0xb0
>> [ 2042.117753]  [<ffffffff8149e365>] dev_suspend+0x95/0xb0
>> [ 2042.123621]  [<ffffffff8149e2d0>] ? dev_suspend+0x0/0xb0
>> [ 2042.129591]  [<ffffffff8149f0d5>] ctl_ioctl+0x1a5/0x240
>> [ 2042.135493]  [<ffffffff815d4eee>] ? _raw_spin_lock+0xe/0x20
>> [ 2042.141770]  [<ffffffff8149f183>] dm_ctl_ioctl+0x13/0x20
>> [ 2042.147739]  [<ffffffff81175245>] do_vfs_ioctl+0x95/0x3c0
>> [ 2042.153801]  [<ffffffff81175611>] sys_ioctl+0xa1/0xb0
>> [ 2042.159478]  [<ffffffff8100c042>] system_call_fastpath+0x16/0x1b
>   kpartx is waiting for kjournald to finish transaction commit and it is
> holding s_umount but that doesn't really seem to be a problem...
> 
> So as I say, find a reason why kjournald is not able to finish committing a
> transaction and you should solve this riddle ;).

Cool, thanks!

Peter

> 
> 								Honza
--
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [Samba]     [Device Mapper]     [CEPH Development]
  Powered by Linux