Add Makefile and Kconfig files so that we can start to compile the filesystem. Signed-off-by: Tracey Dent <tdent48227@xxxxxxxxx> --- drivers/staging/yaffs2/Kconfig | 190 +++++++++++++++++++++++++++++++++++++++ drivers/staging/yaffs2/Makefile | 18 ++++ 2 files changed, 208 insertions(+), 0 deletions(-) create mode 100644 drivers/staging/yaffs2/Kconfig create mode 100644 drivers/staging/yaffs2/Makefile diff --git a/drivers/staging/yaffs2/Kconfig b/drivers/staging/yaffs2/Kconfig new file mode 100644 index 0000000..7b3988c --- /dev/null +++ b/drivers/staging/yaffs2/Kconfig @@ -0,0 +1,190 @@ +# +# YAFFS file system configurations +# + +config YAFFS_FS + tristate "YAFFS2 file system support" + default n + depends on MTD_BLOCK + select YAFFS_YAFFS1 + select YAFFS_YAFFS2 + help + YAFFS2, or Yet Another Flash Filing System, is a filing system + optimised for NAND Flash chips. + + To compile the YAFFS2 file system support as a module, choose M + here: the module will be called yaffs2. + + If unsure, say N. + + Further information on YAFFS2 is available at + <http://www.aleph1.co.uk/yaffs/>. + +config YAFFS_YAFFS1 + bool "512 byte / page devices" + depends on YAFFS_FS + default y + help + Enable YAFFS1 support -- yaffs for 512 byte / page devices + + Not needed for 2K-page devices. + + If unsure, say Y. + +config YAFFS_9BYTE_TAGS + bool "Use older-style on-NAND data format with pageStatus byte" + depends on YAFFS_YAFFS1 + default n + help + + Older-style on-NAND data format has a "pageStatus" byte to record + chunk/page state. This byte is zero when the page is discarded. + Choose this option if you have existing on-NAND data using this + format that you need to continue to support. New data written + also uses the older-style format. Note: Use of this option + generally requires that MTD's oob layout be adjusted to use the + older-style format. See notes on tags formats and MTD versions + in yaffs_mtdif1.c. + + If unsure, say N. + +config YAFFS_DOES_ECC + bool "Lets Yaffs do its own ECC" + depends on YAFFS_FS && YAFFS_YAFFS1 && !YAFFS_9BYTE_TAGS + default n + help + This enables Yaffs to use its own ECC functions instead of using + the ones from the generic MTD-NAND driver. + + If unsure, say N. + +config YAFFS_ECC_WRONG_ORDER + bool "Use the same ecc byte order as Steven Hill's nand_ecc.c" + depends on YAFFS_FS && YAFFS_DOES_ECC && !YAFFS_9BYTE_TAGS + default n + help + This makes yaffs_ecc.c use the same ecc byte order as Steven + Hill's nand_ecc.c. If not set, then you get the same ecc byte + order as SmartMedia. + + If unsure, say N. + +config YAFFS_YAFFS2 + bool "2048 byte (or larger) / page devices" + depends on YAFFS_FS + default y + help + Enable YAFFS2 support -- yaffs for >= 2K bytes per page devices + + If unsure, say Y. + +config YAFFS_AUTO_YAFFS2 + bool "Autoselect yaffs2 format" + depends on YAFFS_YAFFS2 + default y + help + Without this, you need to explicitely use yaffs2 as the file + system type. With this, you can say "yaffs" and yaffs or yaffs2 + will be used depending on the device page size (yaffs on + 512-byte page devices, yaffs2 on 2K page devices). + + If unsure, say Y. + +config YAFFS_DISABLE_TAGS_ECC + bool "Disable YAFFS from doing ECC on tags by default" + depends on YAFFS_FS && YAFFS_YAFFS2 + default n + help + This defaults Yaffs to using its own ECC calculations on tags instead of + just relying on the MTD. + This behavior can also be overridden with tags_ecc_on and + tags_ecc_off mount options. + + If unsure, say N. + + +config YAFFS_DISABLE_WIDE_TNODES + bool "Turn off wide tnodes" + depends on YAFFS_FS + default n + help + Wide tnodes are only used for NAND arrays >=32MB for 512-byte + page devices and >=128MB for 2k page devices. They use slightly + more RAM but are faster since they eliminate chunk group + searching. + + Setting this to 'y' will force tnode width to 16 bits and save + memory but make large arrays slower. + + If unsure, say N. + +config YAFFS_ALWAYS_CHECK_CHUNK_ERASED + bool "Force chunk erase check" + depends on YAFFS_FS + default n + help + Normally YAFFS only checks chunks before writing until an erased + chunk is found. This helps to detect any partially written + chunks that might have happened due to power loss. + + Enabling this forces on the test that chunks are erased in flash + before writing to them. This takes more time but is potentially + a bit more secure. + + Suggest setting Y during development and ironing out driver + issues etc. Suggest setting to N if you want faster writing. + + If unsure, say Y. + +config YAFFS_SHORT_NAMES_IN_RAM + bool "Cache short names in RAM" + depends on YAFFS_FS + default y + help + If this config is set, then short names are stored with the + yaffs_Object. This costs an extra 16 bytes of RAM per object, + but makes look-ups faster. + + If unsure, say Y. + +config YAFFS_EMPTY_LOST_AND_FOUND + bool "Empty lost and found on boot" + depends on YAFFS_FS + default n + help + If this is enabled then the contents of lost and found is + automatically dumped at mount. + + If unsure, say N. + +config YAFFS_DISABLE_BLOCK_REFRESHING + bool "Disable yaffs2 block refreshing" + depends on YAFFS_FS + default n + help + If this is set, then block refreshing is disabled. + Block refreshing infrequently refreshes the oldest block in + a yaffs2 file system. This mechanism helps to refresh flash to + mitigate against data loss. This is particularly useful for MLC. + + If unsure, say N. + +config YAFFS_DISABLE_BACKGROUND + bool "Disable yaffs2 background processing" + depends on YAFFS_FS + default n + help + If this is set, then background processing is disabled. + Background processing makes many foreground activities faster. + + If unsure, say N. + +config YAFFS_XATTR + bool "Enable yaffs2 xattr support" + depends on YAFFS_FS + default y + help + If this is set then yaffs2 will provide xattr support. + If unsure, say Y. + + diff --git a/drivers/staging/yaffs2/Makefile b/drivers/staging/yaffs2/Makefile new file mode 100644 index 0000000..ac4a72d --- /dev/null +++ b/drivers/staging/yaffs2/Makefile @@ -0,0 +1,18 @@ +# +# Makefile for the linux YAFFS filesystem routines. +# + +obj-$(CONFIG_YAFFS_FS) += yaffs.o + +yaffs-y := yaffs_ecc.o yaffs_vfs_glue.o yaffs_guts.o yaffs_checkptrw.o +yaffs-y += yaffs_packedtags1.o yaffs_packedtags2.o yaffs_nand.o +yaffs-y += yaffs_tagscompat.o yaffs_tagsvalidity.o +yaffs-y += yaffs_mtdif.o yaffs_mtdif1.o yaffs_mtdif2.o +yaffs-y += yaffs_nameval.o +yaffs-y += yaffs_allocator.o +yaffs-y += yaffs_yaffs1.o +yaffs-y += yaffs_yaffs2.o +yaffs-y += yaffs_bitmap.o +yaffs-y += yaffs_verify.o + + -- 1.7.3.2.146.gca209 -- To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
