The server and the client are different.. Server is the board and client is my PC. vijai On Mon, Aug 23, 2010 at 4:47 PM, Jeff Layton <jlayton@xxxxxxxxxx> wrote: > On Mon, 23 Aug 2010 10:40:34 +0530 > Vijai Baskar <cristalmaze@xxxxxxxxx> wrote: > >> Hi all, >> >> I am running a samba copy of a 4GB file from my local hard disk to a >> remote hard disk and then find md5sum of the same file in the remote >> hard disk through samba read. I do the following to accomplish this: >> >> 1. mount -t cifs //ip-addr/data /mnt >> 2. cp /home/4g /mnt >> 3. md5sum /mnt/4g >> >> After a few iterations of the above operation I get the following >> warning on the board: >> >> echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. >> [ 6122.450000] smbd D c0204908 0 9712 372 0x00000000 >> [ 6122.480000] [<c0204908>] (schedule+0x2dc/0x328) from [<c0204980>] >> (io_schedule+0x2c/0x48) >> [ 6122.500000] [<c0204980>] (io_schedule+0x2c/0x48) from [<c0072064>] >> (sync_page+0x44/0x50) >> [ 6122.530000] [<c0072064>] (sync_page+0x44/0x50) from [<c0204dd4>] >> (__wait_on_bit_lock+0x5c/0xa8) >> [ 6122.560000] [<c0204dd4>] (__wait_on_bit_lock+0x5c/0xa8) from >> [<c0071ff0>] (__lock_page+0x88/0xa0) >> [ 6122.590000] [<c0071ff0>] (__lock_page+0x88/0xa0) from [<c007b530>] >> (truncate_inode_pages_range+0x2e4/0x38c) >> [ 6122.620000] [<c007b530>] (truncate_inode_pages_range+0x2e4/0x38c) >> from [<c007b5f0>] (truncate_inode_pages+0x18/0x20) >> [ 6122.640000] [<c007b5f0>] (truncate_inode_pages+0x18/0x20) from >> [<c0085acc>] (vmtruncate+0xe4/0x14c) >> [ 6122.670000] [<c0085acc>] (vmtruncate+0xe4/0x14c) from [<c00a43a8>] >> (inode_setattr+0x48/0x148) >> [ 6122.700000] [<c00a43a8>] (inode_setattr+0x48/0x148) from >> [<c00a4630>] (notify_change+0x188/0x1dc) >> [ 6122.730000] [<c00a4630>] (notify_change+0x188/0x1dc) from >> [<c0091440>] (do_truncate+0x6c/0x88) >> [ 6122.760000] [<c0091440>] (do_truncate+0x6c/0x88) from [<c00915c0>] >> (do_sys_ftruncate+0x164/0x170) >> [ 6122.800000] [<c00915c0>] (do_sys_ftruncate+0x164/0x170) from >> [<c00915e0>] (sys_ftruncate64+0x14/0x1c) >> [ 6122.830000] [<c00915e0>] (sys_ftruncate64+0x14/0x1c) from >> [<c0027fa0>] (ret_fast_syscall+0x0/0x2c) >> >> After this samba daemon hangs in the D state. I changed the values of >> /proc/sys/vm/dirty_writeback_centisecs to 250 (default 500) and >> /proc/sys/vm/dirty_expire_centisecs to 1000 (default 3000). But this >> only delays the problem. ps-ax shows smbd in D state. This problem >> seems to occur only during samba read. >> >> Can someone please provide me a solution for the above problem? >> >> regards, >> vijai >> > > (cc'ing linux-fsdevel and samba-technical as this problem is probably > better reported there) > > The stack trace above is for smbd, so I doubt this has much to do with > cifs per-se. Just to make sure though -- are the server and client the > same host? Hint: if so, that configuration is prone to deadlock under > heavy I/O. > > When reporting kernel bugs, it's also a good idea to mention the kernel > version. It might also be helpful to know what the underlying > filesystem is that's being served out. > > It looks like the process is hung trying to lock a page. Most likely > that means that something else is holding that lock and not releasing > it for some reason. Debugging this will probably mean figuring out > what's holding that lock and why it's not releasing it. > > -- > Jeff Layton <jlayton@xxxxxxxxxx> > -- The prizes in life u fail to win only if u doubt the power within -- To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
