Re: [PATCH REPOST RFC] relaxed barriers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch was on top of v2.6.35 but was generated against dirty tree
and wouldn't apply cleanly.  Here's the proper one.

Thanks.
---
 block/blk-barrier.c          |  255 +++++++++++++++----------------------------
 block/blk-core.c             |   31 ++---
 block/blk.h                  |    5
 block/elevator.c             |   80 +------------
 drivers/block/brd.c          |    2
 drivers/block/loop.c         |    2
 drivers/block/osdblk.c       |    2
 drivers/block/pktcdvd.c      |    1
 drivers/block/ps3disk.c      |    3
 drivers/block/virtio_blk.c   |    4
 drivers/block/xen-blkfront.c |    2
 drivers/ide/ide-disk.c       |    4
 drivers/md/dm.c              |    3
 drivers/mmc/card/queue.c     |    2
 drivers/s390/block/dasd.c    |    2
 drivers/scsi/sd.c            |    8 -
 include/linux/blkdev.h       |   63 +++-------
 include/linux/elevator.h     |    6 -
 18 files changed, 155 insertions(+), 320 deletions(-)

Index: work/block/blk-barrier.c
===================================================================
--- work.orig/block/blk-barrier.c
+++ work/block/blk-barrier.c
@@ -9,6 +9,8 @@

 #include "blk.h"

+static struct request *queue_next_ordseq(struct request_queue *q);
+
 /**
  * blk_queue_ordered - does this queue support ordered writes
  * @q:        the request queue
@@ -31,13 +33,8 @@ int blk_queue_ordered(struct request_que
 		return -EINVAL;
 	}

-	if (ordered != QUEUE_ORDERED_NONE &&
-	    ordered != QUEUE_ORDERED_DRAIN &&
-	    ordered != QUEUE_ORDERED_DRAIN_FLUSH &&
-	    ordered != QUEUE_ORDERED_DRAIN_FUA &&
-	    ordered != QUEUE_ORDERED_TAG &&
-	    ordered != QUEUE_ORDERED_TAG_FLUSH &&
-	    ordered != QUEUE_ORDERED_TAG_FUA) {
+	if (ordered != QUEUE_ORDERED_NONE && ordered != QUEUE_ORDERED_BAR &&
+	    ordered != QUEUE_ORDERED_FLUSH && ordered != QUEUE_ORDERED_FUA) {
 		printk(KERN_ERR "blk_queue_ordered: bad value %d\n", ordered);
 		return -EINVAL;
 	}
@@ -60,38 +57,10 @@ unsigned blk_ordered_cur_seq(struct requ
 	return 1 << ffz(q->ordseq);
 }

-unsigned blk_ordered_req_seq(struct request *rq)
+static struct request *blk_ordered_complete_seq(struct request_queue *q,
+						unsigned seq, int error)
 {
-	struct request_queue *q = rq->q;
-
-	BUG_ON(q->ordseq == 0);
-
-	if (rq == &q->pre_flush_rq)
-		return QUEUE_ORDSEQ_PREFLUSH;
-	if (rq == &q->bar_rq)
-		return QUEUE_ORDSEQ_BAR;
-	if (rq == &q->post_flush_rq)
-		return QUEUE_ORDSEQ_POSTFLUSH;
-
-	/*
-	 * !fs requests don't need to follow barrier ordering.  Always
-	 * put them at the front.  This fixes the following deadlock.
-	 *
-	 * http://thread.gmane.org/gmane.linux.kernel/537473
-	 */
-	if (!blk_fs_request(rq))
-		return QUEUE_ORDSEQ_DRAIN;
-
-	if ((rq->cmd_flags & REQ_ORDERED_COLOR) ==
-	    (q->orig_bar_rq->cmd_flags & REQ_ORDERED_COLOR))
-		return QUEUE_ORDSEQ_DRAIN;
-	else
-		return QUEUE_ORDSEQ_DONE;
-}
-
-bool blk_ordered_complete_seq(struct request_queue *q, unsigned seq, int error)
-{
-	struct request *rq;
+	struct request *rq = NULL;

 	if (error && !q->orderr)
 		q->orderr = error;
@@ -99,16 +68,22 @@ bool blk_ordered_complete_seq(struct req
 	BUG_ON(q->ordseq & seq);
 	q->ordseq |= seq;

-	if (blk_ordered_cur_seq(q) != QUEUE_ORDSEQ_DONE)
-		return false;
-
-	/*
-	 * Okay, sequence complete.
-	 */
-	q->ordseq = 0;
-	rq = q->orig_bar_rq;
-	__blk_end_request_all(rq, q->orderr);
-	return true;
+	if (blk_ordered_cur_seq(q) != QUEUE_ORDSEQ_DONE) {
+		/* not complete yet, queue the next ordered sequence */
+		rq = queue_next_ordseq(q);
+	} else {
+		/* complete this barrier request */
+		__blk_end_request_all(q->orig_bar_rq, q->orderr);
+		q->orig_bar_rq = NULL;
+		q->ordseq = 0;
+
+		/* dispatch the next barrier if there's one */
+		if (!list_empty(&q->pending_barriers)) {
+			rq = list_entry_rq(q->pending_barriers.next);
+			list_move(&rq->queuelist, &q->queue_head);
+		}
+	}
+	return rq;
 }

 static void pre_flush_end_io(struct request *rq, int error)
@@ -129,21 +104,10 @@ static void post_flush_end_io(struct req
 	blk_ordered_complete_seq(rq->q, QUEUE_ORDSEQ_POSTFLUSH, error);
 }

-static void queue_flush(struct request_queue *q, unsigned which)
+static void queue_flush(struct request_queue *q, struct request *rq,
+			rq_end_io_fn *end_io)
 {
-	struct request *rq;
-	rq_end_io_fn *end_io;
-
-	if (which == QUEUE_ORDERED_DO_PREFLUSH) {
-		rq = &q->pre_flush_rq;
-		end_io = pre_flush_end_io;
-	} else {
-		rq = &q->post_flush_rq;
-		end_io = post_flush_end_io;
-	}
-
 	blk_rq_init(q, rq);
-	rq->cmd_flags = REQ_HARDBARRIER;
 	rq->rq_disk = q->bar_rq.rq_disk;
 	rq->end_io = end_io;
 	q->prepare_flush_fn(q, rq);
@@ -151,132 +115,93 @@ static void queue_flush(struct request_q
 	elv_insert(q, rq, ELEVATOR_INSERT_FRONT);
 }

-static inline bool start_ordered(struct request_queue *q, struct request **rqp)
+static struct request *queue_next_ordseq(struct request_queue *q)
 {
-	struct request *rq = *rqp;
-	unsigned skip = 0;
+	struct request *rq = &q->bar_rq;

-	q->orderr = 0;
-	q->ordered = q->next_ordered;
-	q->ordseq |= QUEUE_ORDSEQ_STARTED;
-
-	/*
-	 * For an empty barrier, there's no actual BAR request, which
-	 * in turn makes POSTFLUSH unnecessary.  Mask them off.
-	 */
-	if (!blk_rq_sectors(rq)) {
-		q->ordered &= ~(QUEUE_ORDERED_DO_BAR |
-				QUEUE_ORDERED_DO_POSTFLUSH);
-		/*
-		 * Empty barrier on a write-through device w/ ordered
-		 * tag has no command to issue and without any command
-		 * to issue, ordering by tag can't be used.  Drain
-		 * instead.
-		 */
-		if ((q->ordered & QUEUE_ORDERED_BY_TAG) &&
-		    !(q->ordered & QUEUE_ORDERED_DO_PREFLUSH)) {
-			q->ordered &= ~QUEUE_ORDERED_BY_TAG;
-			q->ordered |= QUEUE_ORDERED_BY_DRAIN;
-		}
-	}
-
-	/* stash away the original request */
-	blk_dequeue_request(rq);
-	q->orig_bar_rq = rq;
-	rq = NULL;
-
-	/*
-	 * Queue ordered sequence.  As we stack them at the head, we
-	 * need to queue in reverse order.  Note that we rely on that
-	 * no fs request uses ELEVATOR_INSERT_FRONT and thus no fs
-	 * request gets inbetween ordered sequence.
-	 */
-	if (q->ordered & QUEUE_ORDERED_DO_POSTFLUSH) {
-		queue_flush(q, QUEUE_ORDERED_DO_POSTFLUSH);
-		rq = &q->post_flush_rq;
-	} else
-		skip |= QUEUE_ORDSEQ_POSTFLUSH;
-
-	if (q->ordered & QUEUE_ORDERED_DO_BAR) {
-		rq = &q->bar_rq;
+	switch (blk_ordered_cur_seq(q)) {
+	case QUEUE_ORDSEQ_PREFLUSH:
+		queue_flush(q, rq, pre_flush_end_io);
+		break;

+	case QUEUE_ORDSEQ_BAR:
 		/* initialize proxy request and queue it */
 		blk_rq_init(q, rq);
-		if (bio_data_dir(q->orig_bar_rq->bio) == WRITE)
-			rq->cmd_flags |= REQ_RW;
+		init_request_from_bio(rq, q->orig_bar_rq->bio);
+		rq->cmd_flags &= ~REQ_HARDBARRIER;
 		if (q->ordered & QUEUE_ORDERED_DO_FUA)
 			rq->cmd_flags |= REQ_FUA;
-		init_request_from_bio(rq, q->orig_bar_rq->bio);
 		rq->end_io = bar_end_io;

 		elv_insert(q, rq, ELEVATOR_INSERT_FRONT);
-	} else
-		skip |= QUEUE_ORDSEQ_BAR;
+		break;

-	if (q->ordered & QUEUE_ORDERED_DO_PREFLUSH) {
-		queue_flush(q, QUEUE_ORDERED_DO_PREFLUSH);
-		rq = &q->pre_flush_rq;
-	} else
-		skip |= QUEUE_ORDSEQ_PREFLUSH;
+	case QUEUE_ORDSEQ_POSTFLUSH:
+		queue_flush(q, rq, post_flush_end_io);
+		break;

-	if ((q->ordered & QUEUE_ORDERED_BY_DRAIN) && queue_in_flight(q))
-		rq = NULL;
-	else
-		skip |= QUEUE_ORDSEQ_DRAIN;
-
-	*rqp = rq;
-
-	/*
-	 * Complete skipped sequences.  If whole sequence is complete,
-	 * return false to tell elevator that this request is gone.
-	 */
-	return !blk_ordered_complete_seq(q, skip, 0);
+	default:
+		BUG();
+	}
+	return rq;
 }

-bool blk_do_ordered(struct request_queue *q, struct request **rqp)
+struct request *blk_do_ordered(struct request_queue *q, struct request *rq)
 {
-	struct request *rq = *rqp;
-	const int is_barrier = blk_fs_request(rq) && blk_barrier_rq(rq);
+	unsigned skip = 0;

-	if (!q->ordseq) {
-		if (!is_barrier)
-			return true;
-
-		if (q->next_ordered != QUEUE_ORDERED_NONE)
-			return start_ordered(q, rqp);
-		else {
-			/*
-			 * Queue ordering not supported.  Terminate
-			 * with prejudice.
-			 */
-			blk_dequeue_request(rq);
-			__blk_end_request_all(rq, -EOPNOTSUPP);
-			*rqp = NULL;
-			return false;
-		}
+	if (!blk_barrier_rq(rq))
+		return rq;
+
+	if (q->ordseq) {
+		/*
+		 * Barrier is already in progress and they can't be
+		 * processed in parallel.  Queue for later processing.
+		 */
+		list_move_tail(&rq->queuelist, &q->pending_barriers);
+		return NULL;
+	}
+
+	if (unlikely(q->next_ordered == QUEUE_ORDERED_NONE)) {
+		/*
+		 * Queue ordering not supported.  Terminate
+		 * with prejudice.
+		 */
+		blk_dequeue_request(rq);
+		__blk_end_request_all(rq, -EOPNOTSUPP);
+		return NULL;
 	}

 	/*
-	 * Ordered sequence in progress
+	 * Start a new ordered sequence
 	 */
+	q->orderr = 0;
+	q->ordered = q->next_ordered;
+	q->ordseq |= QUEUE_ORDSEQ_STARTED;

-	/* Special requests are not subject to ordering rules. */
-	if (!blk_fs_request(rq) &&
-	    rq != &q->pre_flush_rq && rq != &q->post_flush_rq)
-		return true;
-
-	if (q->ordered & QUEUE_ORDERED_BY_TAG) {
-		/* Ordered by tag.  Blocking the next barrier is enough. */
-		if (is_barrier && rq != &q->bar_rq)
-			*rqp = NULL;
-	} else {
-		/* Ordered by draining.  Wait for turn. */
-		WARN_ON(blk_ordered_req_seq(rq) < blk_ordered_cur_seq(q));
-		if (blk_ordered_req_seq(rq) > blk_ordered_cur_seq(q))
-			*rqp = NULL;
-	}
+	/*
+	 * For an empty barrier, there's no actual BAR request, which
+	 * in turn makes POSTFLUSH unnecessary.  Mask them off.
+	 */
+	if (!blk_rq_sectors(rq))
+		q->ordered &= ~(QUEUE_ORDERED_DO_BAR |
+				QUEUE_ORDERED_DO_POSTFLUSH);
+
+	/* stash away the original request */
+	blk_dequeue_request(rq);
+	q->orig_bar_rq = rq;
+
+	if (!(q->ordered & QUEUE_ORDERED_DO_PREFLUSH))
+		skip |= QUEUE_ORDSEQ_PREFLUSH;
+
+	if (!(q->ordered & QUEUE_ORDERED_DO_BAR))
+		skip |= QUEUE_ORDSEQ_BAR;
+
+	if (!(q->ordered & QUEUE_ORDERED_DO_POSTFLUSH))
+		skip |= QUEUE_ORDSEQ_POSTFLUSH;

-	return true;
+	/* complete skipped sequences and return the first sequence */
+	return blk_ordered_complete_seq(q, skip, 0);
 }

 static void bio_end_empty_barrier(struct bio *bio, int err)
Index: work/include/linux/blkdev.h
===================================================================
--- work.orig/include/linux/blkdev.h
+++ work/include/linux/blkdev.h
@@ -106,7 +106,6 @@ enum rq_flag_bits {
 	__REQ_FAILED,		/* set if the request failed */
 	__REQ_QUIET,		/* don't worry about errors */
 	__REQ_PREEMPT,		/* set for "ide_preempt" requests */
-	__REQ_ORDERED_COLOR,	/* is before or after barrier */
 	__REQ_RW_SYNC,		/* request is sync (sync write or read) */
 	__REQ_ALLOCED,		/* request came from our alloc pool */
 	__REQ_RW_META,		/* metadata io request */
@@ -135,7 +134,6 @@ enum rq_flag_bits {
 #define REQ_FAILED	(1 << __REQ_FAILED)
 #define REQ_QUIET	(1 << __REQ_QUIET)
 #define REQ_PREEMPT	(1 << __REQ_PREEMPT)
-#define REQ_ORDERED_COLOR	(1 << __REQ_ORDERED_COLOR)
 #define REQ_RW_SYNC	(1 << __REQ_RW_SYNC)
 #define REQ_ALLOCED	(1 << __REQ_ALLOCED)
 #define REQ_RW_META	(1 << __REQ_RW_META)
@@ -437,9 +435,10 @@ struct request_queue
 	 * reserved for flush operations
 	 */
 	unsigned int		ordered, next_ordered, ordseq;
-	int			orderr, ordcolor;
-	struct request		pre_flush_rq, bar_rq, post_flush_rq;
-	struct request		*orig_bar_rq;
+	int			orderr;
+	struct request		bar_rq;
+	struct request          *orig_bar_rq;
+	struct list_head	pending_barriers;

 	struct mutex		sysfs_lock;

@@ -543,49 +542,33 @@ enum {
 	 * Hardbarrier is supported with one of the following methods.
 	 *
 	 * NONE		: hardbarrier unsupported
-	 * DRAIN	: ordering by draining is enough
-	 * DRAIN_FLUSH	: ordering by draining w/ pre and post flushes
-	 * DRAIN_FUA	: ordering by draining w/ pre flush and FUA write
-	 * TAG		: ordering by tag is enough
-	 * TAG_FLUSH	: ordering by tag w/ pre and post flushes
-	 * TAG_FUA	: ordering by tag w/ pre flush and FUA write
-	 */
-	QUEUE_ORDERED_BY_DRAIN		= 0x01,
-	QUEUE_ORDERED_BY_TAG		= 0x02,
-	QUEUE_ORDERED_DO_PREFLUSH	= 0x10,
-	QUEUE_ORDERED_DO_BAR		= 0x20,
-	QUEUE_ORDERED_DO_POSTFLUSH	= 0x40,
-	QUEUE_ORDERED_DO_FUA		= 0x80,
-
-	QUEUE_ORDERED_NONE		= 0x00,
-
-	QUEUE_ORDERED_DRAIN		= QUEUE_ORDERED_BY_DRAIN |
-					  QUEUE_ORDERED_DO_BAR,
-	QUEUE_ORDERED_DRAIN_FLUSH	= QUEUE_ORDERED_DRAIN |
-					  QUEUE_ORDERED_DO_PREFLUSH |
-					  QUEUE_ORDERED_DO_POSTFLUSH,
-	QUEUE_ORDERED_DRAIN_FUA		= QUEUE_ORDERED_DRAIN |
-					  QUEUE_ORDERED_DO_PREFLUSH |
-					  QUEUE_ORDERED_DO_FUA,
+	 * BAR		: writing out barrier is enough
+	 * FLUSH	: barrier and surrounding pre and post flushes
+	 * FUA		: FUA barrier w/ pre flush
+	 */
+	QUEUE_ORDERED_DO_PREFLUSH	= 1 << 0,
+	QUEUE_ORDERED_DO_BAR		= 1 << 1,
+	QUEUE_ORDERED_DO_POSTFLUSH	= 1 << 2,
+	QUEUE_ORDERED_DO_FUA		= 1 << 3,
+
+	QUEUE_ORDERED_NONE		= 0,

-	QUEUE_ORDERED_TAG		= QUEUE_ORDERED_BY_TAG |
-					  QUEUE_ORDERED_DO_BAR,
-	QUEUE_ORDERED_TAG_FLUSH		= QUEUE_ORDERED_TAG |
+	QUEUE_ORDERED_BAR		= QUEUE_ORDERED_DO_BAR,
+	QUEUE_ORDERED_FLUSH		= QUEUE_ORDERED_DO_BAR |
 					  QUEUE_ORDERED_DO_PREFLUSH |
 					  QUEUE_ORDERED_DO_POSTFLUSH,
-	QUEUE_ORDERED_TAG_FUA		= QUEUE_ORDERED_TAG |
+	QUEUE_ORDERED_FUA		= QUEUE_ORDERED_DO_BAR |
 					  QUEUE_ORDERED_DO_PREFLUSH |
 					  QUEUE_ORDERED_DO_FUA,

 	/*
 	 * Ordered operation sequence
 	 */
-	QUEUE_ORDSEQ_STARTED	= 0x01,	/* flushing in progress */
-	QUEUE_ORDSEQ_DRAIN	= 0x02,	/* waiting for the queue to be drained */
-	QUEUE_ORDSEQ_PREFLUSH	= 0x04,	/* pre-flushing in progress */
-	QUEUE_ORDSEQ_BAR	= 0x08,	/* original barrier req in progress */
-	QUEUE_ORDSEQ_POSTFLUSH	= 0x10,	/* post-flushing in progress */
-	QUEUE_ORDSEQ_DONE	= 0x20,
+	QUEUE_ORDSEQ_STARTED	= (1 << 0), /* flushing in progress */
+	QUEUE_ORDSEQ_PREFLUSH	= (1 << 1), /* pre-flushing in progress */
+	QUEUE_ORDSEQ_BAR	= (1 << 2), /* barrier write in progress */
+	QUEUE_ORDSEQ_POSTFLUSH	= (1 << 3), /* post-flushing in progress */
+	QUEUE_ORDSEQ_DONE	= (1 << 4),
 };

 #define blk_queue_plugged(q)	test_bit(QUEUE_FLAG_PLUGGED, &(q)->queue_flags)
@@ -967,10 +950,8 @@ extern void blk_queue_rq_timed_out(struc
 extern void blk_queue_rq_timeout(struct request_queue *, unsigned int);
 extern struct backing_dev_info *blk_get_backing_dev_info(struct block_device *bdev);
 extern int blk_queue_ordered(struct request_queue *, unsigned, prepare_flush_fn *);
-extern bool blk_do_ordered(struct request_queue *, struct request **);
 extern unsigned blk_ordered_cur_seq(struct request_queue *);
 extern unsigned blk_ordered_req_seq(struct request *);
-extern bool blk_ordered_complete_seq(struct request_queue *, unsigned, int);

 extern int blk_rq_map_sg(struct request_queue *, struct request *, struct scatterlist *);
 extern void blk_dump_rq_flags(struct request *, char *);
Index: work/drivers/block/brd.c
===================================================================
--- work.orig/drivers/block/brd.c
+++ work/drivers/block/brd.c
@@ -479,7 +479,7 @@ static struct brd_device *brd_alloc(int
 	if (!brd->brd_queue)
 		goto out_free_dev;
 	blk_queue_make_request(brd->brd_queue, brd_make_request);
-	blk_queue_ordered(brd->brd_queue, QUEUE_ORDERED_TAG, NULL);
+	blk_queue_ordered(brd->brd_queue, QUEUE_ORDERED_BAR, NULL);
 	blk_queue_max_hw_sectors(brd->brd_queue, 1024);
 	blk_queue_bounce_limit(brd->brd_queue, BLK_BOUNCE_ANY);

Index: work/drivers/block/virtio_blk.c
===================================================================
--- work.orig/drivers/block/virtio_blk.c
+++ work/drivers/block/virtio_blk.c
@@ -368,10 +368,10 @@ static int __devinit virtblk_probe(struc

 	/* If barriers are supported, tell block layer that queue is ordered */
 	if (virtio_has_feature(vdev, VIRTIO_BLK_F_FLUSH))
-		blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH,
+		blk_queue_ordered(q, QUEUE_ORDERED_FLUSH,
 				  virtblk_prepare_flush);
 	else if (virtio_has_feature(vdev, VIRTIO_BLK_F_BARRIER))
-		blk_queue_ordered(q, QUEUE_ORDERED_TAG, NULL);
+		blk_queue_ordered(q, QUEUE_ORDERED_BAR, NULL);

 	/* If disk is read-only in the host, the guest should obey */
 	if (virtio_has_feature(vdev, VIRTIO_BLK_F_RO))
Index: work/drivers/scsi/sd.c
===================================================================
--- work.orig/drivers/scsi/sd.c
+++ work/drivers/scsi/sd.c
@@ -2103,15 +2103,13 @@ static int sd_revalidate_disk(struct gen

 	/*
 	 * We now have all cache related info, determine how we deal
-	 * with ordered requests.  Note that as the current SCSI
-	 * dispatch function can alter request order, we cannot use
-	 * QUEUE_ORDERED_TAG_* even when ordered tag is supported.
+	 * with ordered requests.
 	 */
 	if (sdkp->WCE)
 		ordered = sdkp->DPOFUA
-			? QUEUE_ORDERED_DRAIN_FUA : QUEUE_ORDERED_DRAIN_FLUSH;
+			? QUEUE_ORDERED_FUA : QUEUE_ORDERED_FLUSH;
 	else
-		ordered = QUEUE_ORDERED_DRAIN;
+		ordered = QUEUE_ORDERED_BAR;

 	blk_queue_ordered(sdkp->disk->queue, ordered, sd_prepare_flush);

Index: work/block/blk-core.c
===================================================================
--- work.orig/block/blk-core.c
+++ work/block/blk-core.c
@@ -520,6 +520,7 @@ struct request_queue *blk_alloc_queue_no
 	init_timer(&q->unplug_timer);
 	setup_timer(&q->timeout, blk_rq_timed_out_timer, (unsigned long) q);
 	INIT_LIST_HEAD(&q->timeout_list);
+	INIT_LIST_HEAD(&q->pending_barriers);
 	INIT_WORK(&q->unplug_work, blk_unplug_work);

 	kobject_init(&q->kobj, &blk_queue_ktype);
@@ -1036,22 +1037,6 @@ void blk_insert_request(struct request_q
 }
 EXPORT_SYMBOL(blk_insert_request);

-/*
- * add-request adds a request to the linked list.
- * queue lock is held and interrupts disabled, as we muck with the
- * request queue list.
- */
-static inline void add_request(struct request_queue *q, struct request *req)
-{
-	drive_stat_acct(req, 1);
-
-	/*
-	 * elevator indicated where it wants this request to be
-	 * inserted at elevator_merge time
-	 */
-	__elv_add_request(q, req, ELEVATOR_INSERT_SORT, 0);
-}
-
 static void part_round_stats_single(int cpu, struct hd_struct *part,
 				    unsigned long now)
 {
@@ -1184,6 +1169,7 @@ static int __make_request(struct request
 	const bool sync = bio_rw_flagged(bio, BIO_RW_SYNCIO);
 	const bool unplug = bio_rw_flagged(bio, BIO_RW_UNPLUG);
 	const unsigned int ff = bio->bi_rw & REQ_FAILFAST_MASK;
+	int where = ELEVATOR_INSERT_SORT;
 	int rw_flags;

 	if (bio_rw_flagged(bio, BIO_RW_BARRIER) &&
@@ -1191,6 +1177,7 @@ static int __make_request(struct request
 		bio_endio(bio, -EOPNOTSUPP);
 		return 0;
 	}
+
 	/*
 	 * low level driver can indicate that it wants pages above a
 	 * certain limit bounced to low memory (ie for highmem, or even
@@ -1200,7 +1187,12 @@ static int __make_request(struct request

 	spin_lock_irq(q->queue_lock);

-	if (unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER)) || elv_queue_empty(q))
+	if (bio_rw_flagged(bio, BIO_RW_BARRIER)) {
+		where = ELEVATOR_INSERT_ORDERED;
+		goto get_rq;
+	}
+
+	if (elv_queue_empty(q))
 		goto get_rq;

 	el_ret = elv_merge(q, &req, bio);
@@ -1297,7 +1289,10 @@ get_rq:
 		req->cpu = blk_cpu_to_group(smp_processor_id());
 	if (queue_should_plug(q) && elv_queue_empty(q))
 		blk_plug_device(q);
-	add_request(q, req);
+
+	/* insert the request into the elevator */
+	drive_stat_acct(req, 1);
+	__elv_add_request(q, req, where, 0);
 out:
 	if (unplug || !queue_should_plug(q))
 		__generic_unplug_device(q);
Index: work/block/elevator.c
===================================================================
--- work.orig/block/elevator.c
+++ work/block/elevator.c
@@ -564,7 +564,7 @@ void elv_requeue_request(struct request_

 	rq->cmd_flags &= ~REQ_STARTED;

-	elv_insert(q, rq, ELEVATOR_INSERT_REQUEUE);
+	elv_insert(q, rq, ELEVATOR_INSERT_FRONT);
 }

 void elv_drain_elevator(struct request_queue *q)
@@ -611,8 +611,6 @@ void elv_quiesce_end(struct request_queu

 void elv_insert(struct request_queue *q, struct request *rq, int where)
 {
-	struct list_head *pos;
-	unsigned ordseq;
 	int unplug_it = 1;

 	trace_block_rq_insert(q, rq);
@@ -622,10 +620,14 @@ void elv_insert(struct request_queue *q,
 	switch (where) {
 	case ELEVATOR_INSERT_FRONT:
 		rq->cmd_flags |= REQ_SOFTBARRIER;
-
 		list_add(&rq->queuelist, &q->queue_head);
 		break;

+	case ELEVATOR_INSERT_ORDERED:
+		rq->cmd_flags |= REQ_SOFTBARRIER;
+		list_add_tail(&rq->queuelist, &q->queue_head);
+		break;
+
 	case ELEVATOR_INSERT_BACK:
 		rq->cmd_flags |= REQ_SOFTBARRIER;
 		elv_drain_elevator(q);
@@ -661,36 +663,6 @@ void elv_insert(struct request_queue *q,
 		q->elevator->ops->elevator_add_req_fn(q, rq);
 		break;

-	case ELEVATOR_INSERT_REQUEUE:
-		/*
-		 * If ordered flush isn't in progress, we do front
-		 * insertion; otherwise, requests should be requeued
-		 * in ordseq order.
-		 */
-		rq->cmd_flags |= REQ_SOFTBARRIER;
-
-		/*
-		 * Most requeues happen because of a busy condition,
-		 * don't force unplug of the queue for that case.
-		 */
-		unplug_it = 0;
-
-		if (q->ordseq == 0) {
-			list_add(&rq->queuelist, &q->queue_head);
-			break;
-		}
-
-		ordseq = blk_ordered_req_seq(rq);
-
-		list_for_each(pos, &q->queue_head) {
-			struct request *pos_rq = list_entry_rq(pos);
-			if (ordseq <= blk_ordered_req_seq(pos_rq))
-				break;
-		}
-
-		list_add_tail(&rq->queuelist, pos);
-		break;
-
 	default:
 		printk(KERN_ERR "%s: bad insertion point %d\n",
 		       __func__, where);
@@ -709,32 +681,14 @@ void elv_insert(struct request_queue *q,
 void __elv_add_request(struct request_queue *q, struct request *rq, int where,
 		       int plug)
 {
-	if (q->ordcolor)
-		rq->cmd_flags |= REQ_ORDERED_COLOR;
-
 	if (rq->cmd_flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER)) {
-		/*
-		 * toggle ordered color
-		 */
-		if (blk_barrier_rq(rq))
-			q->ordcolor ^= 1;
-
-		/*
-		 * barriers implicitly indicate back insertion
-		 */
-		if (where == ELEVATOR_INSERT_SORT)
-			where = ELEVATOR_INSERT_BACK;
-
-		/*
-		 * this request is scheduling boundary, update
-		 * end_sector
-		 */
+		/* barriers are scheduling boundary, update end_sector */
 		if (blk_fs_request(rq) || blk_discard_rq(rq)) {
 			q->end_sector = rq_end_sector(rq);
 			q->boundary_rq = rq;
 		}
 	} else if (!(rq->cmd_flags & REQ_ELVPRIV) &&
-		    where == ELEVATOR_INSERT_SORT)
+		   where == ELEVATOR_INSERT_SORT)
 		where = ELEVATOR_INSERT_BACK;

 	if (plug)
@@ -846,24 +800,6 @@ void elv_completed_request(struct reques
 		if (blk_sorted_rq(rq) && e->ops->elevator_completed_req_fn)
 			e->ops->elevator_completed_req_fn(q, rq);
 	}
-
-	/*
-	 * Check if the queue is waiting for fs requests to be
-	 * drained for flush sequence.
-	 */
-	if (unlikely(q->ordseq)) {
-		struct request *next = NULL;
-
-		if (!list_empty(&q->queue_head))
-			next = list_entry_rq(q->queue_head.next);
-
-		if (!queue_in_flight(q) &&
-		    blk_ordered_cur_seq(q) == QUEUE_ORDSEQ_DRAIN &&
-		    (!next || blk_ordered_req_seq(next) > QUEUE_ORDSEQ_DRAIN)) {
-			blk_ordered_complete_seq(q, QUEUE_ORDSEQ_DRAIN, 0);
-			__blk_run_queue(q);
-		}
-	}
 }

 #define to_elv(atr) container_of((atr), struct elv_fs_entry, attr)
Index: work/block/blk.h
===================================================================
--- work.orig/block/blk.h
+++ work/block/blk.h
@@ -51,6 +51,8 @@ static inline void blk_clear_rq_complete
  */
 #define ELV_ON_HASH(rq)		(!hlist_unhashed(&(rq)->hash))

+struct request *blk_do_ordered(struct request_queue *q, struct request *rq);
+
 static inline struct request *__elv_next_request(struct request_queue *q)
 {
 	struct request *rq;
@@ -58,7 +60,8 @@ static inline struct request *__elv_next
 	while (1) {
 		while (!list_empty(&q->queue_head)) {
 			rq = list_entry_rq(q->queue_head.next);
-			if (blk_do_ordered(q, &rq))
+			rq = blk_do_ordered(q, rq);
+			if (rq)
 				return rq;
 		}

Index: work/drivers/block/loop.c
===================================================================
--- work.orig/drivers/block/loop.c
+++ work/drivers/block/loop.c
@@ -831,7 +831,7 @@ static int loop_set_fd(struct loop_devic
 	lo->lo_queue->unplug_fn = loop_unplug;

 	if (!(lo_flags & LO_FLAGS_READ_ONLY) && file->f_op->fsync)
-		blk_queue_ordered(lo->lo_queue, QUEUE_ORDERED_DRAIN, NULL);
+		blk_queue_ordered(lo->lo_queue, QUEUE_ORDERED_BAR, NULL);

 	set_capacity(lo->lo_disk, size);
 	bd_set_size(bdev, size << 9);
Index: work/drivers/block/osdblk.c
===================================================================
--- work.orig/drivers/block/osdblk.c
+++ work/drivers/block/osdblk.c
@@ -446,7 +446,7 @@ static int osdblk_init_disk(struct osdbl
 	blk_queue_stack_limits(q, osd_request_queue(osdev->osd));

 	blk_queue_prep_rq(q, blk_queue_start_tag);
-	blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH, osdblk_prepare_flush);
+	blk_queue_ordered(q, QUEUE_ORDERED_FLUSH, osdblk_prepare_flush);

 	disk->queue = q;

Index: work/drivers/block/ps3disk.c
===================================================================
--- work.orig/drivers/block/ps3disk.c
+++ work/drivers/block/ps3disk.c
@@ -480,8 +480,7 @@ static int __devinit ps3disk_probe(struc
 	blk_queue_dma_alignment(queue, dev->blk_size-1);
 	blk_queue_logical_block_size(queue, dev->blk_size);

-	blk_queue_ordered(queue, QUEUE_ORDERED_DRAIN_FLUSH,
-			  ps3disk_prepare_flush);
+	blk_queue_ordered(queue, QUEUE_ORDERED_FLUSH, ps3disk_prepare_flush);

 	blk_queue_max_segments(queue, -1);
 	blk_queue_max_segment_size(queue, dev->bounce_size);
Index: work/drivers/block/xen-blkfront.c
===================================================================
--- work.orig/drivers/block/xen-blkfront.c
+++ work/drivers/block/xen-blkfront.c
@@ -373,7 +373,7 @@ static int xlvbd_barrier(struct blkfront
 	int err;

 	err = blk_queue_ordered(info->rq,
-				info->feature_barrier ? QUEUE_ORDERED_DRAIN : QUEUE_ORDERED_NONE,
+				info->feature_barrier ? QUEUE_ORDERED_BAR : QUEUE_ORDERED_NONE,
 				NULL);

 	if (err)
Index: work/drivers/ide/ide-disk.c
===================================================================
--- work.orig/drivers/ide/ide-disk.c
+++ work/drivers/ide/ide-disk.c
@@ -537,11 +537,11 @@ static void update_ordered(ide_drive_t *
 		       drive->name, barrier ? "" : "not ");

 		if (barrier) {
-			ordered = QUEUE_ORDERED_DRAIN_FLUSH;
+			ordered = QUEUE_ORDERED_FLUSH;
 			prep_fn = idedisk_prepare_flush;
 		}
 	} else
-		ordered = QUEUE_ORDERED_DRAIN;
+		ordered = QUEUE_ORDERED_BAR;

 	blk_queue_ordered(drive->queue, ordered, prep_fn);
 }
Index: work/drivers/md/dm.c
===================================================================
--- work.orig/drivers/md/dm.c
+++ work/drivers/md/dm.c
@@ -1912,8 +1912,7 @@ static struct mapped_device *alloc_dev(i
 	blk_queue_softirq_done(md->queue, dm_softirq_done);
 	blk_queue_prep_rq(md->queue, dm_prep_fn);
 	blk_queue_lld_busy(md->queue, dm_lld_busy);
-	blk_queue_ordered(md->queue, QUEUE_ORDERED_DRAIN_FLUSH,
-			  dm_rq_prepare_flush);
+	blk_queue_ordered(md->queue, QUEUE_ORDERED_FLUSH, dm_rq_prepare_flush);

 	md->disk = alloc_disk(1);
 	if (!md->disk)
Index: work/drivers/mmc/card/queue.c
===================================================================
--- work.orig/drivers/mmc/card/queue.c
+++ work/drivers/mmc/card/queue.c
@@ -128,7 +128,7 @@ int mmc_init_queue(struct mmc_queue *mq,
 	mq->req = NULL;

 	blk_queue_prep_rq(mq->queue, mmc_prep_request);
-	blk_queue_ordered(mq->queue, QUEUE_ORDERED_DRAIN, NULL);
+	blk_queue_ordered(mq->queue, QUEUE_ORDERED_BAR, NULL);
 	queue_flag_set_unlocked(QUEUE_FLAG_NONROT, mq->queue);

 #ifdef CONFIG_MMC_BLOCK_BOUNCE
Index: work/drivers/s390/block/dasd.c
===================================================================
--- work.orig/drivers/s390/block/dasd.c
+++ work/drivers/s390/block/dasd.c
@@ -2196,7 +2196,7 @@ static void dasd_setup_queue(struct dasd
 	 */
 	blk_queue_max_segment_size(block->request_queue, PAGE_SIZE);
 	blk_queue_segment_boundary(block->request_queue, PAGE_SIZE - 1);
-	blk_queue_ordered(block->request_queue, QUEUE_ORDERED_DRAIN, NULL);
+	blk_queue_ordered(block->request_queue, QUEUE_ORDERED_BAR, NULL);
 }

 /*
Index: work/include/linux/elevator.h
===================================================================
--- work.orig/include/linux/elevator.h
+++ work/include/linux/elevator.h
@@ -162,9 +162,9 @@ extern struct request *elv_rb_find(struc
  * Insertion selection
  */
 #define ELEVATOR_INSERT_FRONT	1
-#define ELEVATOR_INSERT_BACK	2
-#define ELEVATOR_INSERT_SORT	3
-#define ELEVATOR_INSERT_REQUEUE	4
+#define ELEVATOR_INSERT_ORDERED	2
+#define ELEVATOR_INSERT_BACK	3
+#define ELEVATOR_INSERT_SORT	4

 /*
  * return values from elevator_may_queue_fn
Index: work/drivers/block/pktcdvd.c
===================================================================
--- work.orig/drivers/block/pktcdvd.c
+++ work/drivers/block/pktcdvd.c
@@ -752,7 +752,6 @@ static int pkt_generic_packet(struct pkt

 	rq->timeout = 60*HZ;
 	rq->cmd_type = REQ_TYPE_BLOCK_PC;
-	rq->cmd_flags |= REQ_HARDBARRIER;
 	if (cgc->quiet)
 		rq->cmd_flags |= REQ_QUIET;

--
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [Samba]     [Device Mapper]     [CEPH Development]
  Powered by Linux