On Tue, Dec 10, 2024 at 06:57:41PM -0800, Joanne Koong wrote:
> On Tue, Dec 10, 2024 at 9:53 AM Malte Schröder <malte.schroeder@xxxxxxxx> wrote:
> >
> > On 10/12/2024 06:14, Joanne Koong wrote:
> > > On Mon, Dec 9, 2024 at 11:52 AM Joanne Koong <joannelkoong@xxxxxxxxx> wrote:
> > >> On Mon, Dec 9, 2024 at 10:47 AM Joanne Koong <joannelkoong@xxxxxxxxx> wrote:
> > >>> On Mon, Dec 9, 2024 at 9:07 AM Malte Schröder <malte.schroeder@xxxxxxxx> wrote:
> > >>>> On 09/12/2024 16:48, Josef Bacik wrote:
> > >>>>> On Mon, Dec 09, 2024 at 03:28:14PM +0000, Matthew Wilcox wrote:
> > >>>>>> On Mon, Dec 09, 2024 at 09:49:48AM -0500, Josef Bacik wrote:
> > >>>>>>>> Ha! This time I bisected from f03b296e8b51 to d1dfb5f52ffc. I ended up
> > >>>>>>>> with 3b97c3652d91 as the culprit.
> > >>>>>>> Willy, I've looked at this code and it does indeed look like a 1:1 conversion,
> > >>>>>>> EXCEPT I'm fuzzy about how how this works with large folios. Previously, if we
> > >>>>>>> got a hugepage in, we'd get each individual struct page back for the whole range
> > >>>>>>> of the hugepage, so if for example we had a 2M hugepage, we'd fill in the
> > >>>>>>> ->offset for each "middle" struct page as 0, since obviously we're consuming
> > >>>>>>> PAGE_SIZE chunks at a time.
> > >>>>>>>
> > >>>>>>> But now we're doing this
> > >>>>>>>
> > >>>>>>> for (i = 0; i < nfolios; i++)
> > >>>>>>> ap->folios[i + ap->num_folios] = page_folio(pages[i]);
> > >>>>>>>
> > >>>>>>> So if userspace handed us a 2M hugepage, page_folio() on each of the
> > >>>>>>> intermediary struct page's would return the same folio, correct? So we'd end up
> > >>>>>>> with the wrong offsets for our fuse request, because they should be based from
> > >>>>>>> the start of the folio, correct?
> > >>>>>> I think you're 100% right. We could put in some nice asserts to check
> > >>>>>> this is what's happening, but it does seem like a rather incautious
> > >>>>>> conversion. Yes, all folios _in the page cache_ for fuse are small, but
> > >>>>>> that's not guaranteed to be the case for folios found in userspace for
> > >>>>>> directio. At least the comment is wrong, and I'd suggest the code is too.
> > >>>>> Ok cool, Malte can you try the attached only compile tested patch and see if the
> > >>>>> problem goes away? Thanks,
> > >>>>>
> > >>>>> Josef
> > >>>>>
> > >>>>> diff --git a/fs/fuse/file.c b/fs/fuse/file.c
> > >>>>> index 88d0946b5bc9..c4b93ead99a5 100644
> > >>>>> --- a/fs/fuse/file.c
> > >>>>> +++ b/fs/fuse/file.c
> > >>>>> @@ -1562,9 +1562,19 @@ static int fuse_get_user_pages(struct fuse_args_pages *ap, struct iov_iter *ii,
> > >>>>> nfolios = DIV_ROUND_UP(ret, PAGE_SIZE);
> > >>>>>
> > >>>>> ap->descs[ap->num_folios].offset = start;
> > >>>>> - fuse_folio_descs_length_init(ap->descs, ap->num_folios, nfolios);
> > >>>>> - for (i = 0; i < nfolios; i++)
> > >>>>> - ap->folios[i + ap->num_folios] = page_folio(pages[i]);
> > >>>>> + for (i = 0; i < nfolios; i++) {
> > >>>>> + struct folio *folio = page_folio(pages[i]);
> > >>>>> + unsigned int offset = start +
> > >>>>> + (folio_page_idx(folio, pages[i]) << PAGE_SHIFT);
> > >>>>> + unsigned int len = min_t(unsigned int, ret, folio_size(folio) - offset);
> > >>>>> +
> > >>>>> + len = min_t(unsigned int, len, PAGE_SIZE);
> > >>>>> +
> > >>>>> + ap->descs[ap->num_folios + i].offset = offset;
> > >>>>> + ap->descs[ap->num_folios + i].length = len;
> > >>>>> + ap->folios[i + ap->num_folios] = folio;
> > >>>>> + start = 0;
> > >>>>> + }
> > >>>>>
> > >>>>> ap->num_folios += nfolios;
> > >>>>> ap->descs[ap->num_folios - 1].length -=
> > >>>> The problem persists with this patch.
> > >>>>
> > >> Malte, could you try Josef's patch except with that last line
> > >> "ap->descs[ap->num_pages - 1].length -= (PAGE_SIZE - ret) &
> > >> (PAGE_SIZE - 1);" also removed? I think we need that line removed as
> > >> well since that does a "-=" instead of a "=" and
> > >> ap->descs[ap->num_folios - 1].length gets set inside the for loop.
> > >>
> > >> In the meantime, I'll try to get a local repro running on fsx so that
> > >> you don't have to keep testing out repos for us.
> > > I was able to repro this locally by doing:
> > >
> > > -- start libfuse server --
> > > sudo ./libfuse/build/example/passthrough_hp --direct-io ~/src ~/fuse_mount
> > >
> > > -- patch + compile this (rough / ugly-for-now) code snippet --
> > > diff --git a/ltp/fsx.c b/ltp/fsx.c
> > > index 777ba0de..9f040bc4 100644
> > > --- a/ltp/fsx.c
> > > +++ b/ltp/fsx.c
> > > @@ -1049,7 +1049,8 @@ dowrite(unsigned offset, unsigned size)
> > > }
> > > }
> > >
> > > -
> > > +#define TWO_MIB (1 << 21) // 2 MiB in bytes
> > >
> > > void
> > > domapwrite(unsigned offset, unsigned size)
> > > {
> > > @@ -1057,6 +1058,8 @@ domapwrite(unsigned offset, unsigned size)
> > > unsigned map_size;
> > > off_t cur_filesize;
> > > char *p;
> > > + int ret;
> > > + unsigned size_2mib_aligned;
> > >
> > > offset -= offset % writebdy;
> > > if (size == 0) {
> > > @@ -1101,6 +1104,41 @@ domapwrite(unsigned offset, unsigned size)
> > > pg_offset = offset & PAGE_MASK;
> > > map_size = pg_offset + size;
> > >
> > > + size_2mib_aligned = (size + TWO_MIB - 1) & ~(TWO_MIB - 1);
> > > + void *placeholder_map = mmap(NULL, size_2mib_aligned * 2, PROT_NONE,
> > > + MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
> > > + if (!placeholder_map) {
> > > + prterr("domapwrite: placeholder map");
> > > + exit(202);
> > > + }
> > > +
> > > + /* align address to nearest 2 MiB */
> > > + void *aligned_address =
> > > + (void *)(((uintptr_t)placeholder_map + TWO_MIB - 1) &
> > > ~(TWO_MIB - 1));
> > > +
> > > + void *map = mmap(aligned_address, size_2mib_aligned, PROT_READ
> > > | PROT_WRITE,
> > > + MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED |
> > > MAP_POPULATE, -1, 0);
> > > +
> > > + ret = madvise(map, size_2mib_aligned, MADV_COLLAPSE);
> > > + if (ret) {
> > > + prterr("domapwrite: madvise collapse");
> > > + exit(203);
> > > + }
> > > +
> > > + memcpy(map, good_buf + offset, size);
> > > +
> > > + if (lseek(fd, offset, SEEK_SET) == -1) {
> > > + prterr("domapwrite: lseek");
> > > + exit(204);
> > > + }
> > > +
> > > + ret = write(fd, map, size);
> > > + if (ret == -1) {
> > > + prterr("domapwrite: write");
> > > + exit(205);
> > > + }
> > > +
> > > + /*
> > > if ((p = (char *)mmap(0, map_size, PROT_READ | PROT_WRITE,
> > > MAP_FILE | MAP_SHARED, fd,
> > > (off_t)(offset - pg_offset))) == (char *)-1) {
> > > @@ -1119,6 +1157,15 @@ domapwrite(unsigned offset, unsigned size)
> > > prterr("domapwrite: munmap");
> > > report_failure(204);
> > > }
> > > + */
> > > + if (munmap(map, size_2mib_aligned) != 0) {
> > > + prterr("domapwrite: munmap map");
> > > + report_failure(206);
> > > + }
> > > + if (munmap(placeholder_map, size_2mib_aligned * 2) != 0) {
> > > + prterr("domapwrite: munmap placeholder_map");
> > > + report_failure(207);
> > > + }
> > > }
> > >
> > > -- run fsx test --
> > > sudo ./fsx -b 3 ~/fuse_mount/example.txt -N 5000
> > >
> > > On the offending commit 3b97c3652, I'm seeing:
> > > [user]$ sudo ./fsx -b 3 ~/fuse_mount/example.txt -N 5000
> > > Will begin at operation 3
> > > Seed set to 1
> > > ...
> > > READ BAD DATA: offset = 0x1925f, size = 0xf7a3, fname =
> > > /home/user/fuse_mount/example.txt
> > > OFFSET GOOD BAD RANGE
> > > 0x1e43f 0x4b4a 0x114a 0x0
> > > operation# (mod 256) for the bad data may be 74
> > > 0x1e441 0xa64a 0xeb4a 0x1
> > > operation# (mod 256) for the bad data may be 74
> > > 0x1e443 0x264a 0xe44a 0x2
> > > operation# (mod 256) for the bad data may be 74
> > > 0x1e445 0x254a 0x9e4a 0x3
> > > ...
> > > Correct content saved for comparison
> > > (maybe hexdump "/home/user/fuse_mount/example.txt" vs
> > > "/home/user/fuse_mount/example.txt.fsxgood")
> > >
> > >
> > > I tested Josef's patch with the "ap->descs[ap->num_pages - 1].length
> > > -= (PAGE_SIZE - ret) & (PAGE_SIZE - 1);" line removed and it fixed the
> > > issue:
> > >
> > > [user]$ sudo ./fsx -b 3 ~/fuse_mount/example.txt -N 5000
> > > Will begin at operation 3
> > > Seed set to 1
> > > ...
> > > copying to largest ever: 0x3e19b
> > > copying to largest ever: 0x3e343
> > > fallocating to largest ever: 0x40000
> > > All 5000 operations completed A-OK!
> > >
> > >
> > > Malte, would you mind double-checking whether this fixes the issue
> > > you're seeing on your end?
> >
> > My test still fails.
>
> Hi Malte,
>
> I simulated your repro with installing bcachefs as the root filesystem
> on a VM running Arch, then running "sudo pacman -S flatpak" and then
> installing FreeCAD with "flatpak install flathub org.freecad.FreeCAD".
>
> On base commit 3b97c3652, I see the same corruption you noted:
>
> error: Failed to install org.kde.Platform: Error pulling from repo:
> While pulling runtime/org.kde.Platform/x86_64/6.7 from remote flathub:
> fsck content object
> 886fd60617b81e81475db5e62beda5846d3e85fe77562eae536d2dd2a7af5b33:
> Corrupted file object; checksum
> expected='886fd60617b81e81475db5e62beda5846d3e85fe77562eae536d2dd2a7af5b33'
> actual='67f5a60d19f7a65e1ee272d455fed138b864be73399816ad18fa71319614a418'
>
>
> i tried this patch on top of commit 3b97c3652 and it fixed it for me:
>
> diff --git a/fs/fuse/file.c b/fs/fuse/file.c
> index 14af8c41fc83..0d213a22972b 100644
> --- a/fs/fuse/file.c
> +++ b/fs/fuse/file.c
> @@ -1560,18 +1560,24 @@ static int fuse_get_user_pages(struct
> fuse_args_pages *ap, struct iov_iter *ii,
>
> nbytes += ret;
>
> - ret += start;
> - /* Currently, all folios in FUSE are one page */
> - nfolios = DIV_ROUND_UP(ret, PAGE_SIZE);
> -
> - ap->folio_descs[ap->num_folios].offset = start;
> - fuse_folio_descs_length_init(ap->folio_descs,
> ap->num_folios, nfolios);
> - for (i = 0; i < nfolios; i++)
> - ap->folios[i + ap->num_folios] = page_folio(pages[i]);
> -
> - ap->num_folios += nfolios;
> - ap->folio_descs[ap->num_folios - 1].length -=
> - (PAGE_SIZE - ret) & (PAGE_SIZE - 1);
> + nfolios = DIV_ROUND_UP(ret + start, PAGE_SIZE);
> +
> + for (i = 0; i < nfolios; i++) {
> + struct folio *folio = page_folio(pages[i]);
> + unsigned int offset = start +
> + (folio_page_idx(folio, pages[i]) << PAGE_SHIFT);
> + unsigned int len = min_t(unsigned int, ret,
> folio_size(folio) - offset);
> +
> + len = min_t(unsigned int, len, PAGE_SIZE - start);
> +
> + ap->descs[ap->num_folios].offset = offset;
> + ap->descs[ap->num_folios].length = len;
> + ap->folios[ap->num_folios] = folio;
> + start = 0;
> + ret -= len;
> + ap->num_folios++;
> + }
> +
> nr_pages += nfolios;
> }
> kfree(pages);
>
> I ran this multiple times and don't see the corruption issues.
>
> However, I do see another issue crop up on some of my VMs, which is
> flatpak hanging with this corresponding stack trace:
>
> [ 368.520976] INFO: task pool-/usr/lib/f:582 blocked for more than 122 seconds.
> [ 368.521509] Not tainted 6.12.0-rc1-g86b74eb5a11e #734
> [ 368.521905] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
> disables this message.
> [ 368.522483] task:pool-/usr/lib/f state:D stack:0 pid:582
> tgid:405 ppid:1 flags:0x00000002
> [ 368.523238] Call Trace:
> [ 368.523411] <TASK>
> [ 368.523548] __schedule+0xaf0/0x27f0
> [ 368.523773] ? __pfx___schedule+0x10/0x10
> [ 368.524024] schedule+0x7e/0x300
> [ 368.524233] __wait_on_freeing_inode+0xda/0x120
> [ 368.524527] ? __pfx___wait_on_freeing_inode+0x10/0x10
> [ 368.524830] ? _raw_spin_unlock_irqrestore+0xe/0x30
> [ 368.525124] ? __pfx_wake_bit_function+0x10/0x10
> [ 368.525411] bch2_inode_hash_find+0x372/0x580
> [ 368.525700] ? __pfx_bch2_dirent_read_target+0x10/0x10
> [ 368.526023] ? bch2_dirent_hash+0x23d/0x370
> [ 368.526286] ? __pfx_bch2_inode_hash_find+0x10/0x10
> [ 368.526583] ? __pfx_dirent_cmp_key+0x10/0x10
> [ 368.526972] bch2_lookup_trans+0x61a/0x990
> [ 368.527247] ? __pfx_bch2_lookup_trans+0x10/0x10
> [ 368.527559] ? __do_sys_newfstatat+0x75/0xd0
> [ 368.527850] ? do_syscall_64+0x4b/0x110
> [ 368.528088] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e
> [ 368.528411] ? __pfx_bch2_hash_info_init+0x10/0x10
> [ 368.528720] ? __mod_memcg_state+0x102/0x390
> [ 368.529134] ? obj_cgroup_charge+0x1b4/0x4c0
> [ 368.529500] ? __memcg_slab_post_alloc_hook+0x536/0xba0
> [ 368.529913] ? kvm_sched_clock_read+0x11/0x20
> [ 368.530265] ? _raw_spin_lock+0x85/0xe0
> [ 368.530553] ? bch2_lookup_trans+0x323/0x990
> [ 368.530909] ? __asan_memset+0x24/0x50
> [ 368.531204] ? __bch2_trans_get+0x735/0xdd0
> [ 368.531525] ? bch2_lookup+0x18a/0x350
> [ 368.531859] bch2_lookup+0x18a/0x350
> [ 368.532145] ? __pfx_bch2_lookup+0x10/0x10
> [ 368.532466] ? __pfx_lockref_get_not_dead+0x10/0x10
> [ 368.532860] __lookup_slow+0x182/0x350
> [ 368.533159] ? __pfx___lookup_slow+0x10/0x10
> [ 368.533513] walk_component+0x2ab/0x4f0
> [ 368.533816] path_lookupat+0x120/0x660
> [ 368.534110] ? vfs_fstatat+0x53/0xb0
> [ 368.534413] filename_lookup+0x1aa/0x520
> [ 368.534718] ? __pfx_filename_lookup+0x10/0x10
> [ 368.535052] ? __wake_up_common+0xf2/0x170
> [ 368.535385] ? _raw_spin_unlock_irq+0xe/0x30
> [ 368.535683] ? __pfx_eventfd_write+0x10/0x10
> [ 368.536019] ? kasan_save_stack+0x24/0x50
> [ 368.536313] ? __kasan_record_aux_stack+0xad/0xc0
> [ 368.536651] ? kmem_cache_free+0x353/0x550
> [ 368.536919] ? do_syscall_64+0x4b/0x110
> [ 368.537179] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e
> [ 368.537528] vfs_statx+0xbf/0x140
> [ 368.537745] ? kmem_cache_alloc_noprof+0x12d/0x340
> [ 368.538057] ? __pfx_vfs_statx+0x10/0x10
> [ 368.538322] ? getname_flags.part.0+0xaf/0x4a0
> [ 368.538627] vfs_fstatat+0x6c/0xb0
> [ 368.538840] __do_sys_newfstatat+0x75/0xd0
> [ 368.539100] ? __pfx___do_sys_newfstatat+0x10/0x10
> [ 368.539415] ? kasan_unpoison+0x27/0x60
> [ 368.539675] ? __pfx_slab_free_after_rcu_debug+0x10/0x10
> [ 368.540081] ? fdget_pos+0x366/0x5d0
> [ 368.540355] ? fput+0x1b/0x2d0
> [ 368.540602] ? ksys_write+0x18c/0x1c0
> [ 368.540934] ? __pfx_ksys_write+0x10/0x10
> [ 368.541252] ? fpregs_assert_state_consistent+0x20/0xa0
> [ 368.541657] ? clear_bhb_loop+0x45/0xa0
> [ 368.541948] do_syscall_64+0x4b/0x110
> [ 368.542270] entry_SYSCALL_64_after_hwframe+0x76/0x7e
> [ 368.542711] RIP: 0033:0x7fef789bb94e
> [ 368.543001] RSP: 002b:00007fef713fe468 EFLAGS: 00000246 ORIG_RAX:
> 0000000000000106
> [ 368.543605] RAX: ffffffffffffffda RBX: 00007fef713fe5d0 RCX: 00007fef789bb94e
> [ 368.544129] RDX: 00007fef713fe540 RSI: 00007fef713fe5d0 RDI: 000000000000001f
> [ 368.544636] RBP: 00007fef713ff710 R08: 0000000000000073 R09: 0000000000000000
> [ 368.545130] R10: 0000000000000100 R11: 0000000000000246 R12: 000000000000001f
> [ 368.545640] R13: 00007fef713fe540 R14: 00007fef5802dc00 R15: 00007fef713ff780
> [ 368.546177] </TASK>
>
> I'm seeing this happen on commit 86b74eb5 as well, which is the commit
> that's before any of my or Josef's folio changes, and this persists
> across reboots. I've seen this happen for a couple other tasks too,
> "task:flatpak" and "task:pool-flatpak" with similar stack traces eg
>
> [ 368.505270] task:pool-flatpak in state:D stack:0 pid:568
> tgid:538 ppid:537 flags:0x00000002
> [ 368.505872] Call Trace:
> [ 368.506042] <TASK>
> [ 368.506191] __schedule+0xaf0/0x27f0
> [ 368.506430] ? __pfx___schedule+0x10/0x10
> [ 368.506715] schedule+0x7e/0x300
> [ 368.506940] __wait_on_freeing_inode+0xda/0x120
> [ 368.507490] ? __pfx___wait_on_freeing_inode+0x10/0x10
> [ 368.507965] ? _raw_spin_unlock_irqrestore+0xe/0x30
> [ 368.508312] ? __pfx_wake_bit_function+0x10/0x10
> [ 368.508650] bch2_inode_hash_find+0x372/0x580
> [ 368.508969] ? __pfx_bch2_dirent_read_target+0x10/0x10
> [ 368.509332] ? bch2_dirent_hash+0x23d/0x370
> [ 368.509637] ? __pfx_bch2_inode_hash_find+0x10/0x10
> [ 368.509991] ? __pfx_dirent_cmp_key+0x10/0x10
> [ 368.510309] bch2_lookup_trans+0x61a/0x990
> [ 368.510662] ? __pfx_bch2_lookup_trans+0x10/0x10
> [ 368.511155] ? vfs_statx+0xbf/0x140
> [ 368.511429] ? vfs_fstatat+0x6c/0xb0
> [ 368.511731] ? do_syscall_64+0x4b/0x110
> [ 368.512014] ? __d_alloc+0x5cc/0x8f0
> [ 368.512283] ? memcg_list_lru_alloc+0x184/0x8a0
> [ 368.512612] ? __pfx_bch2_hash_info_init+0x10/0x10
> [ 368.512943] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e
> [ 368.513327] ? __memcg_slab_post_alloc_hook+0x536/0xba0
> [ 368.513753] ? kvm_sched_clock_read+0x11/0x20
> [ 368.514133] ? _raw_spin_lock+0x85/0xe0
> [ 368.515095] ? bch2_lookup_trans+0x323/0x990
> [ 368.516994] ? __asan_memset+0x24/0x50
> [ 368.517294] ? __bch2_trans_get+0x735/0xdd0
> [ 368.517675] ? bch2_lookup+0x18a/0x350
> [ 368.517987] bch2_lookup+0x18a/0x350
> [ 368.518271] ? __pfx_bch2_lookup+0x10/0x10
> [ 368.518568] ? __pfx_lockref_get_not_dead+0x10/0x10
> [ 368.518933] __lookup_slow+0x182/0x350
> [ 368.519264] ? __pfx___lookup_slow+0x10/0x10
> [ 368.519633] walk_component+0x2ab/0x4f0
> [ 368.519934] ? fput+0x1b/0x2d0
> [ 368.520206] link_path_walk.part.0.constprop.0+0x4ad/0xac0
> [ 368.520657] path_lookupat+0x72/0x660
> [ 368.521022] ? vfs_fstatat+0x53/0xb0
> [ 368.521343] filename_lookup+0x1aa/0x520
> [ 368.521664] ? __pfx_filename_lookup+0x10/0x10
> [ 368.522021] ? __pfx_xa_load+0x10/0x10
> [ 368.522319] ? ___slab_alloc+0x128/0x9d0
> [ 368.522683] ? mntput_no_expire+0xcf/0x760
> [ 368.523018] ? lockref_put_return+0xc7/0x140
> [ 368.523357] ? kmem_cache_free+0x19e/0x550
> [ 368.523686] ? __pfx_mutex_unlock+0x10/0x10
> [ 368.524035] ? do_renameat2+0x1f4/0xa50
> [ 368.524404] ? do_renameat2+0x1f4/0xa50
> [ 368.524716] vfs_statx+0xbf/0x140
> [ 368.524980] ? kmem_cache_alloc_noprof+0x12d/0x340
> [ 368.525355] ? __pfx_vfs_statx+0x10/0x10
> [ 368.525702] ? getname_flags.part.0+0xaf/0x4a0
> [ 368.526080] vfs_fstatat+0x6c/0xb0
> [ 368.526391] __do_sys_newfstatat+0x75/0xd0
> [ 368.526745] ? __pfx___do_sys_newfstatat+0x10/0x10
> [ 368.527206] ? do_symlinkat+0x15d/0x260
> [ 368.527509] ? do_mkdirat+0x19d/0x2c0
> [ 368.527807] ? kasan_save_track+0x14/0x30
> [ 368.528132] ? getname_flags.part.0+0xaf/0x4a0
> [ 368.528509] ? fpregs_assert_state_consistent+0x20/0xa0
> [ 368.529198] ? clear_bhb_loop+0x45/0xa0
> [ 368.529536] do_syscall_64+0x4b/0x110
> [ 368.529856] entry_SYSCALL_64_after_hwframe+0x76/0x7e
> [ 368.530279] RIP: 0033:0x7f592256194e
> [ 368.530610] RSP: 002b:00007f5915bfe548 EFLAGS: 00000217 ORIG_RAX:
> 0000000000000106
> [ 368.531350] RAX: ffffffffffffffda RBX: 0000000000000013 RCX: 00007f592256194e
> [ 368.531943] RDX: 00007f5915bfe570 RSI: 00007f5915bfe600 RDI: 0000000000000013
> [ 368.532491] RBP: 00007f5915bfe740 R08: 0000000000000073 R09: 0000000000000000
> [ 368.533048] R10: 0000000000000100 R11: 0000000000000217 R12: 00007f5915bfe570
> [ 368.533597] R13: 00007f5915bfe600 R14: 00007f5915bfe56c R15: 00007f5915bfe780
> [ 368.534236] </TASK>
> [ 368.534419] INFO: task pool-flatpak in:571 blocked for more than 122 seconds.
>
> This seems like something we should investigate as well. I'm happy to
> help repro this if needed. I'm able to hit this pretty consistently.
>
> Malte, would you mind applying the patch above and confirming if this
> fixes it for you on your VM? And while you've been running flatpak,
> have you also been seeing some flatpak tasks hanging on some of your
> VMs?
You're testing with snapshots? That one is fixed in my master branch.
