This patch makes it easier for IAA hardware acceleration in the iaa_crypto
driver to be loaded by default with "iaa_verify_compress" disabled, to
facilitate performance comparisons with software compressors (which also
do not run compress verification by default). Earlier, iaa_crypto compress
verification used to be enabled by default.
With this patch, if users want to enable compress verification, they can do
so with these steps:
1) disable all the IAA device/wq bindings that happen at boot time
2) rmmod iaa_crypto
3) modprobe iaa_crypto
4) echo 1 > /sys/bus/dsa/drivers/crypto/verify_compress
5) re-run initialization of the IAA devices and wqs
Signed-off-by: Kanchana P Sridhar <kanchana.p.sridhar@xxxxxxxxx>
---
drivers/crypto/intel/iaa/iaa_crypto_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/intel/iaa/iaa_crypto_main.c b/drivers/crypto/intel/iaa/iaa_crypto_main.c
index 6c262b1eb09d..8e6859c97970 100644
--- a/drivers/crypto/intel/iaa/iaa_crypto_main.c
+++ b/drivers/crypto/intel/iaa/iaa_crypto_main.c
@@ -94,7 +94,7 @@ static bool iaa_crypto_enabled;
static bool iaa_crypto_registered;
/* Verify results of IAA compress or not */
-static bool iaa_verify_compress = true;
+static bool iaa_verify_compress = false;
static ssize_t verify_compress_show(struct device_driver *driver, char *buf)
{
--
2.27.0
