Re: [PATCH v9 13/39] KVM: arm64: Manage GCS registers for guests

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 25 Jun 2024 15:57:41 +0100,
Mark Brown <broonie@xxxxxxxxxx> wrote:
> 
> GCS introduces a number of system registers for EL1 and EL0, on systems
> with GCS we need to context switch them and expose them to VMMs to allow
> guests to use GCS, as well as describe their fine grained traps to
> nested virtualisation.  Traps are already disabled.

I don't see anything related to FGTs at all.

> 
> Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@xxxxxxxxxx>
> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
> ---
>  arch/arm64/include/asm/kvm_host.h          | 14 +++++++++
>  arch/arm64/include/asm/vncr_mapping.h      |  2 ++
>  arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h | 48 +++++++++++++++++++++++-------
>  arch/arm64/kvm/sys_regs.c                  | 25 +++++++++++++++-
>  4 files changed, 78 insertions(+), 11 deletions(-)
> 
> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
> index 36b8e97bf49e..316fb412f355 100644
> --- a/arch/arm64/include/asm/kvm_host.h
> +++ b/arch/arm64/include/asm/kvm_host.h
> @@ -411,6 +411,10 @@ enum vcpu_sysreg {
>  	GCR_EL1,	/* Tag Control Register */
>  	TFSRE0_EL1,	/* Tag Fault Status Register (EL0) */
>  
> +	/* Guarded Control Stack registers */
> +	GCSCRE0_EL1,	/* Guarded Control Stack Control (EL0) */
> +	GCSPR_EL0,	/* Guarded Control Stack Pointer (EL0) */
> +
>  	/* 32bit specific registers. */
>  	DACR32_EL2,	/* Domain Access Control Register */
>  	IFSR32_EL2,	/* Instruction Fault Status Register */
> @@ -481,6 +485,10 @@ enum vcpu_sysreg {
>  	VNCR(PIR_EL1),	 /* Permission Indirection Register 1 (EL1) */
>  	VNCR(PIRE0_EL1), /*  Permission Indirection Register 0 (EL1) */
>  
> +	/* Guarded Control Stack registers */
> +	VNCR(GCSPR_EL1),	/* Guarded Control Stack Pointer (EL1) */
> +	VNCR(GCSCR_EL1),	/* Guarded Control Stack Control (EL1) */
> +
>  	VNCR(HFGRTR_EL2),
>  	VNCR(HFGWTR_EL2),
>  	VNCR(HFGITR_EL2),
> @@ -1343,6 +1351,12 @@ static inline bool __vcpu_has_feature(const struct kvm_arch *ka, int feature)
>  
>  #define kvm_vcpu_initialized(v) vcpu_get_flag(vcpu, VCPU_INITIALIZED)
>  
> +static inline bool has_gcs(void)
> +{
> +	return IS_ENABLED(CONFIG_ARM64_GCS) &&
> +		cpus_have_final_cap(ARM64_HAS_GCS);
> +}

This is mostly useless, see below.

> +
>  int kvm_trng_call(struct kvm_vcpu *vcpu);
>  #ifdef CONFIG_KVM
>  extern phys_addr_t hyp_mem_base;
> diff --git a/arch/arm64/include/asm/vncr_mapping.h b/arch/arm64/include/asm/vncr_mapping.h
> index df2c47c55972..5e83e6f579fd 100644
> --- a/arch/arm64/include/asm/vncr_mapping.h
> +++ b/arch/arm64/include/asm/vncr_mapping.h
> @@ -88,6 +88,8 @@
>  #define VNCR_PMSIRR_EL1         0x840
>  #define VNCR_PMSLATFR_EL1       0x848
>  #define VNCR_TRFCR_EL1          0x880
> +#define VNCR_GCSPR_EL1		0x8C0
> +#define VNCR_GCSCR_EL1		0x8D0
>  #define VNCR_MPAM1_EL1          0x900
>  #define VNCR_MPAMHCR_EL2        0x930
>  #define VNCR_MPAMVPMV_EL2       0x938
> diff --git a/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h b/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h
> index 4be6a7fa0070..b20212d80e9b 100644
> --- a/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h
> +++ b/arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h
> @@ -16,6 +16,27 @@
>  #include <asm/kvm_hyp.h>
>  #include <asm/kvm_mmu.h>
>  
> +static inline struct kvm_vcpu *ctxt_to_vcpu(struct kvm_cpu_context *ctxt)
> +{
> +	struct kvm_vcpu *vcpu = ctxt->__hyp_running_vcpu;
> +
> +	if (!vcpu)
> +		vcpu = container_of(ctxt, struct kvm_vcpu, arch.ctxt);
> +
> +	return vcpu;
> +}
> +
> +static inline bool ctxt_has_gcs(struct kvm_cpu_context *ctxt)
> +{
> +	struct kvm_vcpu *vcpu;
> +
> +	if (!cpus_have_final_cap(ARM64_HAS_GCS))
> +		return false;
> +
> +	vcpu = ctxt_to_vcpu(ctxt);
> +	return kvm_has_feat(kern_hyp_va(vcpu->kvm), ID_AA64PFR1_EL1, GCS, IMP);
> +}
> +
>  static inline void __sysreg_save_common_state(struct kvm_cpu_context *ctxt)
>  {
>  	ctxt_sys_reg(ctxt, MDSCR_EL1)	= read_sysreg(mdscr_el1);
> @@ -25,16 +46,8 @@ static inline void __sysreg_save_user_state(struct kvm_cpu_context *ctxt)
>  {
>  	ctxt_sys_reg(ctxt, TPIDR_EL0)	= read_sysreg(tpidr_el0);
>  	ctxt_sys_reg(ctxt, TPIDRRO_EL0)	= read_sysreg(tpidrro_el0);
> -}
> -
> -static inline struct kvm_vcpu *ctxt_to_vcpu(struct kvm_cpu_context *ctxt)
> -{
> -	struct kvm_vcpu *vcpu = ctxt->__hyp_running_vcpu;
> -
> -	if (!vcpu)
> -		vcpu = container_of(ctxt, struct kvm_vcpu, arch.ctxt);
> -
> -	return vcpu;
> +	if (ctxt_has_gcs(ctxt))
> +		ctxt_sys_reg(ctxt, GCSPR_EL0) = read_sysreg_s(SYS_GCSPR_EL0);
>  }
>  
>  static inline bool ctxt_has_mte(struct kvm_cpu_context *ctxt)
> @@ -80,6 +93,12 @@ static inline void __sysreg_save_el1_state(struct kvm_cpu_context *ctxt)
>  	ctxt_sys_reg(ctxt, PAR_EL1)	= read_sysreg_par();
>  	ctxt_sys_reg(ctxt, TPIDR_EL1)	= read_sysreg(tpidr_el1);
>  
> +	if (ctxt_has_gcs(ctxt)) {

Since this is conditioned on S1PIE, it should be only be evaluated
when PIE is enabled in the guest.

> +		ctxt_sys_reg(ctxt, GCSPR_EL1)	= read_sysreg_el1(SYS_GCSPR);
> +		ctxt_sys_reg(ctxt, GCSCR_EL1)	= read_sysreg_el1(SYS_GCSCR);
> +		ctxt_sys_reg(ctxt, GCSCRE0_EL1)	= read_sysreg_s(SYS_GCSCRE0_EL1);

Why is this part of the EL1 context? It clearly only matters to EL0
execution, so it could be switched in load/put on nVHE as well. And
actually, given that the whole thing is strictly for userspace, why do
we switch *anything* eagerly at all?

> +	}
> +
>  	if (ctxt_has_mte(ctxt)) {
>  		ctxt_sys_reg(ctxt, TFSR_EL1) = read_sysreg_el1(SYS_TFSR);
>  		ctxt_sys_reg(ctxt, TFSRE0_EL1) = read_sysreg_s(SYS_TFSRE0_EL1);
> @@ -113,6 +132,8 @@ static inline void __sysreg_restore_user_state(struct kvm_cpu_context *ctxt)
>  {
>  	write_sysreg(ctxt_sys_reg(ctxt, TPIDR_EL0),	tpidr_el0);
>  	write_sysreg(ctxt_sys_reg(ctxt, TPIDRRO_EL0),	tpidrro_el0);
> +	if (ctxt_has_gcs(ctxt))
> +		write_sysreg_s(ctxt_sys_reg(ctxt, GCSPR_EL0), SYS_GCSPR_EL0);
>  }
>  
>  static inline void __sysreg_restore_el1_state(struct kvm_cpu_context *ctxt)
> @@ -156,6 +177,13 @@ static inline void __sysreg_restore_el1_state(struct kvm_cpu_context *ctxt)
>  	write_sysreg(ctxt_sys_reg(ctxt, PAR_EL1),	par_el1);
>  	write_sysreg(ctxt_sys_reg(ctxt, TPIDR_EL1),	tpidr_el1);
>  
> +	if (ctxt_has_gcs(ctxt)) {
> +		write_sysreg_el1(ctxt_sys_reg(ctxt, GCSPR_EL1),	SYS_GCSPR);
> +		write_sysreg_el1(ctxt_sys_reg(ctxt, GCSCR_EL1),	SYS_GCSCR);
> +		write_sysreg_s(ctxt_sys_reg(ctxt, GCSCRE0_EL1),
> +			       SYS_GCSCRE0_EL1);
> +	}
> +
>  	if (ctxt_has_mte(ctxt)) {
>  		write_sysreg_el1(ctxt_sys_reg(ctxt, TFSR_EL1), SYS_TFSR);
>  		write_sysreg_s(ctxt_sys_reg(ctxt, TFSRE0_EL1), SYS_TFSRE0_EL1);
> diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
> index 22b45a15d068..cf068dcfbd49 100644
> --- a/arch/arm64/kvm/sys_regs.c
> +++ b/arch/arm64/kvm/sys_regs.c
> @@ -2015,6 +2015,23 @@ static unsigned int mte_visibility(const struct kvm_vcpu *vcpu,
>  	.visibility = mte_visibility,		\
>  }
>  
> +static unsigned int gcs_visibility(const struct kvm_vcpu *vcpu,
> +				   const struct sys_reg_desc *rd)
> +{
> +	if (has_gcs())
> +		return 0;

No. we've been here before.

> +
> +	return REG_HIDDEN;
> +}
> +
> +#define GCS_REG(name) {				\
> +	SYS_DESC(SYS_##name),			\
> +	.access = undef_access,			\
> +	.reset = reset_unknown,			\
> +	.reg = name,				\
> +	.visibility = gcs_visibility,		\
> +}
> +
>  static unsigned int el2_visibility(const struct kvm_vcpu *vcpu,
>  				   const struct sys_reg_desc *rd)
>  {
> @@ -2306,7 +2323,8 @@ static const struct sys_reg_desc sys_reg_descs[] = {
>  		   ID_AA64PFR0_EL1_GIC |
>  		   ID_AA64PFR0_EL1_AdvSIMD |
>  		   ID_AA64PFR0_EL1_FP), },
> -	ID_SANITISED(ID_AA64PFR1_EL1),
> +	ID_WRITABLE(ID_AA64PFR1_EL1, ~(ID_AA64PFR1_EL1_RES0 |
> +				       ID_AA64PFR1_EL1_BT)),

I don't know what you're trying to do here, but that's not right. If
you want to make this register writable, here's the shopping list:

https://lore.kernel.org/all/87ikxsi0v9.wl-maz@xxxxxxxxxx/

>  	ID_UNALLOCATED(4,2),
>  	ID_UNALLOCATED(4,3),
>  	ID_WRITABLE(ID_AA64ZFR0_EL1, ~ID_AA64ZFR0_EL1_RES0),
> @@ -2390,6 +2408,10 @@ static const struct sys_reg_desc sys_reg_descs[] = {
>  	PTRAUTH_KEY(APDB),
>  	PTRAUTH_KEY(APGA),
>  
> +	GCS_REG(GCSCR_EL1),
> +	GCS_REG(GCSPR_EL1),
> +	GCS_REG(GCSCRE0_EL1),
> +
>  	{ SYS_DESC(SYS_SPSR_EL1), access_spsr},
>  	{ SYS_DESC(SYS_ELR_EL1), access_elr},
>  
> @@ -2476,6 +2498,7 @@ static const struct sys_reg_desc sys_reg_descs[] = {
>  	{ SYS_DESC(SYS_SMIDR_EL1), undef_access },
>  	{ SYS_DESC(SYS_CSSELR_EL1), access_csselr, reset_unknown, CSSELR_EL1 },
>  	{ SYS_DESC(SYS_CTR_EL0), access_ctr },
> +	GCS_REG(GCSPR_EL0),
>  	{ SYS_DESC(SYS_SVCR), undef_access },
>  
>  	{ PMU_SYS_REG(PMCR_EL0), .access = access_pmcr, .reset = reset_pmcr,

I don't see the vcpu's hcrx_el2 being updated to enable GCS. How does
it work then? I also don't see the FGU updates when GCS is disabled,
nor the corresponding FGT bits being marked as RES0.

	M.

-- 
Without deviation from the norm, progress is not possible.




[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [NTFS 3]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [NTFS 3]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux