[PATCH] fuse: Enable dynamic configuration of FUSE_MAX_MAX_PAGES

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Introduce the capability to dynamically configure the FUSE_MAX_MAX_PAGES
limit through a sysctl. This enhancement allows system administrators to
adjust the value based on system-specific requirements.

This removes the previous static limit of 256 max pages, which limits
the max write size of a request to 1 MiB (on 4096 pagesize systems).
Having the ability to up the max write size beyond 1 MiB allows for the
perf improvements detailed in this thread [1].

$ sysctl -a | grep fuse_max_max_pages
fs.fuse.fuse_max_max_pages = 256

$ sysctl -n fs.fuse.fuse_max_max_pages
256

$ echo 1024 | sudo tee /proc/sys/fs/fuse/fuse_max_max_pages
1024

$ sysctl -n fs.fuse.fuse_max_max_pages
1024

[1] https://lore.kernel.org/linux-fsdevel/20240124070512.52207-1-jefflexu@xxxxxxxxxxxxxxxxx/T/#u

Signed-off-by: Joanne Koong <joannelkoong@xxxxxxxxx>
---
 Documentation/admin-guide/sysctl/fs.rst | 10 +++++++
 fs/fuse/Makefile                        |  2 +-
 fs/fuse/fuse_i.h                        | 14 +++++++---
 fs/fuse/inode.c                         | 11 +++++++-
 fs/fuse/ioctl.c                         |  4 ++-
 fs/fuse/sysctl.c                        | 35 +++++++++++++++++++++++++
 6 files changed, 70 insertions(+), 6 deletions(-)
 create mode 100644 fs/fuse/sysctl.c

diff --git a/Documentation/admin-guide/sysctl/fs.rst b/Documentation/admin-guide/sysctl/fs.rst
index 47499a1742bd..3f96e2f47b01 100644
--- a/Documentation/admin-guide/sysctl/fs.rst
+++ b/Documentation/admin-guide/sysctl/fs.rst
@@ -332,3 +332,13 @@ Each "watch" costs roughly 90 bytes on a 32-bit kernel, and roughly 160 bytes
 on a 64-bit one.
 The current default value for ``max_user_watches`` is 4% of the
 available low memory, divided by the "watch" cost in bytes.
+
+5. /proc/sys/fs/fuse - Configuration options for FUSE filesystems
+=====================================================================
+
+This directory contains the following configuration options for FUSE
+filesystems:
+
+``/proc/sys/fs/fuse/fuse_max_max_pages`` is a read/write file for
+setting/getting the maximum number of pages that can be used for servicing
+requests in FUSE.
diff --git a/fs/fuse/Makefile b/fs/fuse/Makefile
index 6e0228c6d0cb..cd4ef3e08ebf 100644
--- a/fs/fuse/Makefile
+++ b/fs/fuse/Makefile
@@ -7,7 +7,7 @@ obj-$(CONFIG_FUSE_FS) += fuse.o
 obj-$(CONFIG_CUSE) += cuse.o
 obj-$(CONFIG_VIRTIO_FS) += virtiofs.o
 
-fuse-y := dev.o dir.o file.o inode.o control.o xattr.o acl.o readdir.o ioctl.o
+fuse-y := dev.o dir.o file.o inode.o control.o xattr.o acl.o readdir.o ioctl.o sysctl.o
 fuse-y += iomode.o
 fuse-$(CONFIG_FUSE_DAX) += dax.o
 fuse-$(CONFIG_FUSE_PASSTHROUGH) += passthrough.o
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index f23919610313..0c9aaf626341 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -35,9 +35,6 @@
 /** Default max number of pages that can be used in a single read request */
 #define FUSE_DEFAULT_MAX_PAGES_PER_REQ 32
 
-/** Maximum of max_pages received in init_out */
-#define FUSE_MAX_MAX_PAGES 256
-
 /** Bias for fi->writectr, meaning new writepages must not be sent */
 #define FUSE_NOWRITE INT_MIN
 
@@ -47,6 +44,9 @@
 /** Number of dentries for each connection in the control filesystem */
 #define FUSE_CTL_NUM_DENTRIES 5
 
+/** Maximum of max_pages received in init_out */
+extern unsigned int fuse_max_max_pages;
+
 /** List of active connections */
 extern struct list_head fuse_conn_list;
 
@@ -1472,4 +1472,12 @@ ssize_t fuse_passthrough_splice_write(struct pipe_inode_info *pipe,
 				      size_t len, unsigned int flags);
 ssize_t fuse_passthrough_mmap(struct file *file, struct vm_area_struct *vma);
 
+#ifdef CONFIG_SYSCTL
+extern int fuse_sysctl_register(void);
+extern void fuse_sysctl_unregister(void);
+#else
+#define fuse_sysctl_register()		(0)
+#define fuse_sysctl_unregister()	do { } while (0)
+#endif /* CONFIG_SYSCTL */
+
 #endif /* _FS_FUSE_I_H */
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 99e44ea7d875..5d29a92389e6 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -35,6 +35,8 @@ DEFINE_MUTEX(fuse_mutex);
 
 static int set_global_limit(const char *val, const struct kernel_param *kp);
 
+unsigned int fuse_max_max_pages = 256;
+
 unsigned max_user_bgreq;
 module_param_call(max_user_bgreq, set_global_limit, param_get_uint,
 		  &max_user_bgreq, 0644);
@@ -932,7 +934,7 @@ void fuse_conn_init(struct fuse_conn *fc, struct fuse_mount *fm,
 	fc->pid_ns = get_pid_ns(task_active_pid_ns(current));
 	fc->user_ns = get_user_ns(user_ns);
 	fc->max_pages = FUSE_DEFAULT_MAX_PAGES_PER_REQ;
-	fc->max_pages_limit = FUSE_MAX_MAX_PAGES;
+	fc->max_pages_limit = fuse_max_max_pages;
 
 	if (IS_ENABLED(CONFIG_FUSE_PASSTHROUGH))
 		fuse_backing_files_init(fc);
@@ -2039,8 +2041,14 @@ static int __init fuse_fs_init(void)
 	if (err)
 		goto out3;
 
+	err = fuse_sysctl_register();
+	if (err)
+		goto out4;
+
 	return 0;
 
+ out4:
+	unregister_filesystem(&fuse_fs_type);
  out3:
 	unregister_fuseblk();
  out2:
@@ -2053,6 +2061,7 @@ static void fuse_fs_cleanup(void)
 {
 	unregister_filesystem(&fuse_fs_type);
 	unregister_fuseblk();
+	fuse_sysctl_unregister();
 
 	/*
 	 * Make sure all delayed rcu free inodes are flushed before we
diff --git a/fs/fuse/ioctl.c b/fs/fuse/ioctl.c
index 572ce8a82ceb..a6c8ee551635 100644
--- a/fs/fuse/ioctl.c
+++ b/fs/fuse/ioctl.c
@@ -10,6 +10,8 @@
 #include <linux/fileattr.h>
 #include <linux/fsverity.h>
 
+#define FUSE_VERITY_ENABLE_ARG_MAX_PAGES 256
+
 static ssize_t fuse_send_ioctl(struct fuse_mount *fm, struct fuse_args *args,
 			       struct fuse_ioctl_out *outarg)
 {
@@ -140,7 +142,7 @@ static int fuse_setup_enable_verity(unsigned long arg, struct iovec *iov,
 {
 	struct fsverity_enable_arg enable;
 	struct fsverity_enable_arg __user *uarg = (void __user *)arg;
-	const __u32 max_buffer_len = FUSE_MAX_MAX_PAGES * PAGE_SIZE;
+	const __u32 max_buffer_len = FUSE_VERITY_ENABLE_ARG_MAX_PAGES * PAGE_SIZE;
 
 	if (copy_from_user(&enable, uarg, sizeof(enable)))
 		return -EFAULT;
diff --git a/fs/fuse/sysctl.c b/fs/fuse/sysctl.c
new file mode 100644
index 000000000000..0dbcb9688f73
--- /dev/null
+++ b/fs/fuse/sysctl.c
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/fs/fuse/fuse_sysctl.c
+ *
+ * Sysctl interface to fuse parameters
+ */
+#include <linux/sysctl.h>
+
+#include "fuse_i.h"
+
+static struct ctl_table_header *fuse_table_header;
+
+static struct ctl_table fuse_sysctl_table[] = {
+	{
+		.procname	= "fuse_max_max_pages",
+		.data		= &fuse_max_max_pages,
+		.maxlen		= sizeof(fuse_max_max_pages),
+		.mode		= 0644,
+		.proc_handler	= proc_douintvec,
+	},
+};
+
+int fuse_sysctl_register(void)
+{
+	fuse_table_header = register_sysctl("fs/fuse", fuse_sysctl_table);
+	if (!fuse_table_header)
+		return -ENOMEM;
+	return 0;
+}
+
+void fuse_sysctl_unregister(void)
+{
+	unregister_sysctl_table(fuse_table_header);
+	fuse_table_header = NULL;
+}
-- 
2.43.0





[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [NTFS 3]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [NTFS 3]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux