Re: [PATCH v4 2/2] proc: restrict /proc/pid/mem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, May 24, 2024 at 10:28:58PM +0300, Adrian Ratiu wrote:
> Prior to v2.6.39 write access to /proc/<pid>/mem was restricted,
> after which it got allowed in commit 198214a7ee50 ("proc: enable
> writing to /proc/pid/mem"). Famous last words from that patch:
> "no longer a security hazard". :)
> 
> Afterwards exploits started causing drama like [1]. The exploits
> using /proc/*/mem can be rather sophisticated like [2] which
> installed an arbitrary payload from noexec storage into a running
> process then exec'd it, which itself could include an ELF loader
> to run arbitrary code off noexec storage.
> 
> One of the well-known problems with /proc/*/mem writes is they
> ignore page permissions via FOLL_FORCE, as opposed to writes via
> process_vm_writev which respect page permissions. These writes can
> also be used to bypass mode bits.
> 
> To harden against these types of attacks, distrbutions might want
> to restrict /proc/pid/mem accesses, either entirely or partially,
> for eg. to restrict FOLL_FORCE usage.
> 
> Known valid use-cases which still need these accesses are:
> 
> * Debuggers which also have ptrace permissions, so they can access
> memory anyway via PTRACE_POKEDATA & co. Some debuggers like GDB
> are designed to write /proc/pid/mem for basic functionality.
> 
> * Container supervisors using the seccomp notifier to intercept
> syscalls and rewrite memory of calling processes by passing
> around /proc/pid/mem file descriptors.
> 
> There might be more, that's why these params default to disabled.
> 
> Regarding other mechanisms which can block these accesses:
> 
> * seccomp filters can be used to block mmap/mprotect calls with W|X
> perms, but they often can't block open calls as daemons want to
> read/write their runtime state and seccomp filters cannot check
> file paths, so plain write calls can't be easily blocked.
> 
> * Since the mem file is part of the dynamic /proc/<pid>/ space, we
> can't run chmod once at boot to restrict it (and trying to react
> to every process and run chmod doesn't scale, and the kernel no
> longer allows chmod on any of these paths).
> 
> * SELinux could be used with a rule to cover all /proc/*/mem files,
> but even then having multiple ways to deny an attack is useful in
> case one layer fails.
> 
> Thus we introduce four kernel parameters to restrict /proc/*/mem
> access: open-read, open-write, write and foll_force. All these can
> be independently set to the following values:
> 
> all     => restrict all access unconditionally.
> ptracer => restrict all access except for ptracer processes.
> 
> If left unset, the existing behaviour is preserved, i.e. access
> is governed by basic file permissions.
> 
> Examples which can be passed by bootloaders:
> 
> proc_mem.restrict_foll_force=all
> proc_mem.restrict_open_write=ptracer
> proc_mem.restrict_open_read=ptracer
> proc_mem.restrict_write=all
> 
> These knobs can also be enabled via Kconfig like for eg:
> 
> CONFIG_PROC_MEM_RESTRICT_WRITE_PTRACE_DEFAULT=y
> CONFIG_PROC_MEM_RESTRICT_FOLL_FORCE_PTRACE_DEFAULT=y
> 
> Each distribution needs to decide what restrictions to apply,
> depending on its use-cases. Embedded systems might want to do
> more, while general-purpouse distros might want a more relaxed
> policy, because for e.g. foll_force=all and write=all both break
> break GDB, so it might be a bit excessive.
> 
> Based on an initial patch by Mike Frysinger <vapier@xxxxxxxxxxxx>.
> 
> Link: https://lwn.net/Articles/476947/ [1]
> Link: https://issues.chromium.org/issues/40089045 [2]
> Cc: Guenter Roeck <groeck@xxxxxxxxxxxx>
> Cc: Doug Anderson <dianders@xxxxxxxxxxxx>
> Cc: Kees Cook <keescook@xxxxxxxxxxxx>
> Cc: Jann Horn <jannh@xxxxxxxxxx>
> Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
> Cc: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
> Cc: Christian Brauner <brauner@xxxxxxxxxx>
> Co-developed-by: Mike Frysinger <vapier@xxxxxxxxxxxx>
> Signed-off-by: Mike Frysinger <vapier@xxxxxxxxxxxx>
> Signed-off-by: Adrian Ratiu <adrian.ratiu@xxxxxxxxxxxxx>
> ---
> Changes in v4:
> * Renamed parameters to use a fake namespace and respect
>   subject-verb-objec pattern (eg proc_mem.restrict_read)
> * Replaced static key array with individual definitions.
>   Still need 6 key definitions because we need to store 3
>   states for each parameter, eg read all/ptrace/DAC states,
>   so we need 2 keys for each parameter -- they will not fit
>   into just 1 static key.
> * Replaced strncmp -> strcmp and dropped redundant helper,
>   significantly simplified DEFINE_EARLY_PROC_MEM_RESTRICT
>   macro.
> * Dropped else from __mem_open_check_access_restriction()
> * Moved ptracer check to proc_mem_open to avoid ToCToU
> * Added extra mm_access() check for the mem_rw() case
> * Found a use case for blocking just writes independent
>   of open restrictions, so added a new param
> * Added *_DEFAULT Kconfigs
> ---
>  .../admin-guide/kernel-parameters.txt         |  38 ++++++
>  fs/proc/base.c                                | 124 +++++++++++++++++-
>  security/Kconfig                              |  68 ++++++++++
>  3 files changed, 229 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index 500cfa776225..3fdfeaefccf2 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -4792,6 +4792,44 @@
>  	printk.time=	Show timing data prefixed to each printk message line
>  			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)
>  
> +	proc_mem.restrict_foll_force= [KNL]
> +			Format: {all | ptracer}
> +			Restricts the use of the FOLL_FORCE flag for /proc/*/mem access.
> +			If restricted, the FOLL_FORCE flag will not be added to vm accesses.
> +			Can be one of:
> +			- 'all' restricts all access unconditionally.
> +			- 'ptracer' allows access only for ptracer processes.
> +			If not specified, FOLL_FORCE is always used.
> +
> +	proc_mem.restrict_open_read= [KNL]
> +			Format: {all | ptracer}
> +			Allows restricting read access to /proc/*/mem files during open().
> +			Depending on restriction level, open for reads return -EACCES.
> +			Can be one of:
> +			- 'all' restricts all access unconditionally.
> +			- 'ptracer' allows access only for ptracer processes.
> +			If not specified, then basic file permissions continue to apply.
> +
> +	proc_mem.restrict_open_write= [KNL]
> +			Format: {all | ptracer}
> +			Allows restricting write access to /proc/*/mem files during open().
> +			Depending on restriction level, open for writes return -EACCES.
> +			Can be one of:
> +			- 'all' restricts all access unconditionally.
> +			- 'ptracer' allows access only for ptracer processes.
> +			If not specified, then basic file permissions continue to apply.
> +
> +	proc_mem.restrict_write= [KNL]
> +			Format: {all | ptracer}
> +			Allows restricting write access to /proc/*/mem after the files
> +			have been opened, during the actual write calls. This is useful for
> +			systems which can't block writes earlier during open().
> +			Depending on restriction level, writes will return -EACCES.
> +			Can be one of:
> +			- 'all' restricts all access unconditionally.
> +			- 'ptracer' allows access only for ptracer processes.
> +			If not specified, then basic file permissions continue to apply.
> +
>  	processor.max_cstate=	[HW,ACPI]
>  			Limit processor to maximum C-state
>  			max_cstate=9 overrides any DMI blacklist limit.
> diff --git a/fs/proc/base.c b/fs/proc/base.c
> index 6faf1b3a4117..9223eaaf055b 100644
> --- a/fs/proc/base.c
> +++ b/fs/proc/base.c
> @@ -152,6 +152,30 @@ struct pid_entry {
>  		NULL, &proc_pid_attr_operations,	\
>  		{ .lsmid = LSMID })
>  
> +#define DEFINE_EARLY_PROC_MEM_RESTRICT(CFG, name)				\
> +DEFINE_STATIC_KEY_MAYBE_RO(CONFIG_PROC_MEM_RESTRICT_##CFG##_DEFAULT,		\
> +			   proc_mem_restrict_##name##_all);			\
> +DEFINE_STATIC_KEY_MAYBE_RO(CONFIG_PROC_MEM_RESTRICT_##CFG##_PTRACE_DEFAULT,	\
> +			   proc_mem_restrict_##name##_ptracer);			\
> +										\
> +static int __init early_proc_mem_restrict_##name(char *buf)			\
> +{										\
> +	if (!buf)								\
> +		return -EINVAL;							\
> +										\
> +	if (strcmp(buf, "all") == 0)						\
> +		static_key_slow_inc(&proc_mem_restrict_##name##_all.key);	\
> +	else if (strcmp(buf, "ptracer") == 0)					\
> +		static_key_slow_inc(&proc_mem_restrict_##name##_ptracer.key);	\
> +	return 0;								\
> +}										\
> +early_param("proc_mem.restrict_" #name, early_proc_mem_restrict_##name)
> +
> +DEFINE_EARLY_PROC_MEM_RESTRICT(OPEN_READ, open_read);
> +DEFINE_EARLY_PROC_MEM_RESTRICT(OPEN_WRITE, open_write);
> +DEFINE_EARLY_PROC_MEM_RESTRICT(WRITE, write);
> +DEFINE_EARLY_PROC_MEM_RESTRICT(FOLL_FORCE, foll_force);
> +
>  /*
>   * Count the number of hardlinks for the pid_entry table, excluding the .
>   * and .. links.
> @@ -794,12 +818,56 @@ static const struct file_operations proc_single_file_operations = {
>  };
>  
>  
> +static int __mem_open_access_permitted(struct file *file, struct task_struct *task)
> +{
> +	bool is_ptracer;
> +
> +	rcu_read_lock();
> +	is_ptracer = current == ptrace_parent(task);
> +	rcu_read_unlock();
> +
> +	if (file->f_mode & FMODE_WRITE) {
> +		/* Deny if writes are unconditionally disabled via param */
> +		if (static_branch_maybe(CONFIG_PROC_MEM_RESTRICT_OPEN_WRITE_DEFAULT,
> +					&proc_mem_restrict_open_write_all))
> +			return -EACCES;
> +
> +		/* Deny if writes are allowed only for ptracers via param */
> +		if (static_branch_maybe(CONFIG_PROC_MEM_RESTRICT_OPEN_WRITE_PTRACE_DEFAULT,
> +					&proc_mem_restrict_open_write_ptracer) &&
> +		    !is_ptracer)
> +			return -EACCES;
> +	}
> +
> +	if (file->f_mode & FMODE_READ) {
> +		/* Deny if reads are unconditionally disabled via param */
> +		if (static_branch_maybe(CONFIG_PROC_MEM_RESTRICT_OPEN_READ_DEFAULT,
> +					&proc_mem_restrict_open_read_all))
> +			return -EACCES;
> +
> +		/* Deny if reads are allowed only for ptracers via param */
> +		if (static_branch_maybe(CONFIG_PROC_MEM_RESTRICT_OPEN_READ_PTRACE_DEFAULT,
> +					&proc_mem_restrict_open_read_ptracer) &&
> +		    !is_ptracer)
> +			return -EACCES;
> +	}
> +
> +	return 0; /* R/W are not restricted */
> +}
> +
>  struct mm_struct *proc_mem_open(struct file  *file, unsigned int mode)
>  {
>  	struct task_struct *task = get_proc_task(file->f_inode);
>  	struct mm_struct *mm = ERR_PTR(-ESRCH);
> +	int ret;
>  
>  	if (task) {
> +		ret = __mem_open_access_permitted(file, task);
> +		if (ret) {
> +			put_task_struct(task);
> +			return ERR_PTR(ret);
> +		}
> +
>  		mm = mm_access(task, mode | PTRACE_MODE_FSCREDS);
>  		put_task_struct(task);
>  
> @@ -835,6 +903,56 @@ static int mem_open(struct inode *inode, struct file *file)
>  	return ret;
>  }
>  
> +static bool __mem_rw_current_is_ptracer(struct file *file)
> +{
> +	struct inode *inode = file_inode(file);
> +	struct task_struct *task = get_proc_task(inode);
> +	int is_ptracer = false, has_mm_access = false;
> +
> +	if (task) {
> +		rcu_read_lock();
> +		is_ptracer = current == ptrace_parent(task);
> +		rcu_read_unlock();
> +
> +		has_mm_access = file->private_data == mm_access(task, PTRACE_MODE_READ_FSCREDS);
> +		put_task_struct(task);
> +	}
> +
> +	return is_ptracer && has_mm_access;
> +}

This is much improved; thanks!

One resource leak is here, though: mm_access() takes a reference count
on the mm, so you'll need something like:


	...
	if (task) {
		struct mm_struct *mm;

		rcu_read_lock();
		is_ptracer = current == ptrace_parent(task);
		rcu_read_unlock();

		mm = mm_access(task, PTRACE_MODE_READ_FSCREDS);
		if (mm && file->private_data == mm) {
			has_mm_access = true;
			mmput(mm);
		}
		put_task_struct(task);
	}
	...


> +
> +static unsigned int __mem_rw_get_foll_force_flag(struct file *file)
> +{
> +	/* Deny if FOLL_FORCE is disabled via param */
> +	if (static_branch_maybe(CONFIG_PROC_MEM_RESTRICT_FOLL_FORCE_DEFAULT,
> +				&proc_mem_restrict_foll_force_all))
> +		return 0;
> +
> +	/* Deny if FOLL_FORCE is allowed only for ptracers via param */
> +	if (static_branch_maybe(CONFIG_PROC_MEM_RESTRICT_FOLL_FORCE_PTRACE_DEFAULT,
> +				&proc_mem_restrict_foll_force_ptracer) &&
> +	    !__mem_rw_current_is_ptracer(file))
> +		return 0;
> +
> +	return FOLL_FORCE;
> +}
> +
> +static bool __mem_rw_block_writes(struct file *file)
> +{
> +	/* Block if writes are disabled via param proc_mem.restrict_write=all */
> +	if (static_branch_maybe(CONFIG_PROC_MEM_RESTRICT_WRITE_DEFAULT,
> +				&proc_mem_restrict_write_all))
> +		return true;
> +
> +	/* Block with an exception only for ptracers */
> +	if (static_branch_maybe(CONFIG_PROC_MEM_RESTRICT_WRITE_PTRACE_DEFAULT,
> +				&proc_mem_restrict_write_ptracer) &&
> +	    !__mem_rw_current_is_ptracer(file))
> +		return true;
> +
> +	return false;
> +}
> +
>  static ssize_t mem_rw(struct file *file, char __user *buf,
>  			size_t count, loff_t *ppos, int write)
>  {
> @@ -847,6 +965,9 @@ static ssize_t mem_rw(struct file *file, char __user *buf,
>  	if (!mm)
>  		return 0;
>  
> +	if (write && __mem_rw_block_writes(file))
> +		return -EACCES;
> +
>  	page = (char *)__get_free_page(GFP_KERNEL);
>  	if (!page)
>  		return -ENOMEM;
> @@ -855,7 +976,8 @@ static ssize_t mem_rw(struct file *file, char __user *buf,
>  	if (!mmget_not_zero(mm))
>  		goto free;
>  
> -	flags = FOLL_FORCE | (write ? FOLL_WRITE : 0);
> +	flags = (write ? FOLL_WRITE : 0);
> +	flags |= __mem_rw_get_foll_force_flag(file);
>  
>  	while (count > 0) {
>  		size_t this_len = min_t(size_t, count, PAGE_SIZE);
> diff --git a/security/Kconfig b/security/Kconfig
> index 412e76f1575d..0cd73f848b5a 100644
> --- a/security/Kconfig
> +++ b/security/Kconfig
> @@ -183,6 +183,74 @@ config STATIC_USERMODEHELPER_PATH
>  	  If you wish for all usermode helper programs to be disabled,
>  	  specify an empty string here (i.e. "").
>  
> +menu "Procfs mem restriction options"
> +
> +config PROC_MEM_RESTRICT_FOLL_FORCE_DEFAULT
> +	bool "Restrict all FOLL_FORCE flag usage"
> +	default n
> +	help
> +	  Restrict all FOLL_FORCE usage during /proc/*/mem RW.
> +	  Debuggerg like GDB require using FOLL_FORCE for basic
> +	  functionality.
> +
> +config PROC_MEM_RESTRICT_FOLL_FORCE_PTRACE_DEFAULT
> +	bool "Restrict FOLL_FORCE usage except for ptracers"
> +	default n
> +	help
> +	  Restrict FOLL_FORCE usage during /proc/*/mem RW, except
> +	  for ptracer processes. Debuggerg like GDB require using
> +	  FOLL_FORCE for basic functionality.
> +
> +config PROC_MEM_RESTRICT_OPEN_READ_DEFAULT
> +	bool "Restrict all open() read access"
> +	default n
> +	help
> +	  Restrict all open() read access to /proc/*/mem files.
> +	  Use with caution: this can break init systems, debuggers,
> +	  container supervisors and other tasks using /proc/*/mem.
> +
> +config PROC_MEM_RESTRICT_OPEN_READ_PTRACE_DEFAULT
> +	bool "Restrict open() for reads except for ptracers"
> +	default n
> +	help
> +	  Restrict open() read access except for ptracer processes.
> +	  Use with caution: this can break init systems, debuggers,
> +	  container supervisors and other non-ptrace capable tasks
> +	  using /proc/*/mem.
> +
> +config PROC_MEM_RESTRICT_OPEN_WRITE_DEFAULT
> +	bool "Restrict all open() write access"
> +	default n
> +	help
> +	  Restrict all open() write access to /proc/*/mem files.
> +	  Debuggers like GDB and some container supervisors tasks
> +	  require opening as RW and may break.
> +
> +config PROC_MEM_RESTRICT_OPEN_WRITE_PTRACE_DEFAULT
> +	bool "Restrict open() for writes except for ptracers"
> +	default n
> +	help
> +	  Restrict open() write access except for ptracer processes,
> +	  usually debuggers.
> +
> +config PROC_MEM_RESTRICT_WRITE_DEFAULT
> +	bool "Restrict all write() calls"
> +	default n
> +	help
> +	  Restrict all /proc/*/mem direct write calls.
> +	  Open calls with RW modes are still allowed, this blocks
> +	  just the write() calls.
> +
> +config PROC_MEM_RESTRICT_WRITE_PTRACE_DEFAULT
> +	bool "Restrict write() calls except for ptracers"
> +	default n
> +	help
> +	  Restrict /proc/*/mem direct write calls except for ptracer processes.
> +	  Open calls with RW modes are still allowed, this blocks just
> +	  the write() calls.
> +
> +endmenu
> +
>  source "security/selinux/Kconfig"
>  source "security/smack/Kconfig"
>  source "security/tomoyo/Kconfig"
> -- 
> 2.44.1

I think this looks really close.

-- 
Kees Cook




[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [NTFS 3]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [NTFS 3]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux