Re: [PATCH v2 4/5] cachefiles: cyclic allocation of msg_id to avoid reuse

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2024-05-20 at 12:06 +0800, Baokun Li wrote:
> Hi Jeff,
> 
> Thank you very much for your review!
> 
> On 2024/5/19 19:11, Jeff Layton wrote:
> > On Wed, 2024-05-15 at 20:51 +0800, libaokun@xxxxxxxxxxxxxxx wrote:
> > > From: Baokun Li <libaokun1@xxxxxxxxxx>
> > > 
> > > Reusing the msg_id after a maliciously completed reopen request may cause
> > > a read request to remain unprocessed and result in a hung, as shown below:
> > > 
> > >         t1       |      t2       |      t3
> > > -------------------------------------------------
> > > cachefiles_ondemand_select_req
> > >   cachefiles_ondemand_object_is_close(A)
> > >   cachefiles_ondemand_set_object_reopening(A)
> > >   queue_work(fscache_object_wq, &info->work)
> > >                  ondemand_object_worker
> > >                   cachefiles_ondemand_init_object(A)
> > >                    cachefiles_ondemand_send_req(OPEN)
> > >                      // get msg_id 6
> > >                      wait_for_completion(&req_A->done)
> > > cachefiles_ondemand_daemon_read
> > >   // read msg_id 6 req_A
> > >   cachefiles_ondemand_get_fd
> > >   copy_to_user
> > >                                  // Malicious completion msg_id 6
> > >                                  copen 6,-1
> > >                                  cachefiles_ondemand_copen
> > >                                   complete(&req_A->done)
> > >                                   // will not set the object to close
> > >                                   // because ondemand_id && fd is valid.
> > > 
> > >                  // ondemand_object_worker() is done
> > >                  // but the object is still reopening.
> > > 
> > >                                  // new open req_B
> > >                                  cachefiles_ondemand_init_object(B)
> > >                                   cachefiles_ondemand_send_req(OPEN)
> > >                                   // reuse msg_id 6
> > > process_open_req
> > >   copen 6,A.size
> > >   // The expected failed copen was executed successfully
> > > 
> > > Expect copen to fail, and when it does, it closes fd, which sets the
> > > object to close, and then close triggers reopen again. However, due to
> > > msg_id reuse resulting in a successful copen, the anonymous fd is not
> > > closed until the daemon exits. Therefore read requests waiting for reopen
> > > to complete may trigger hung task.
> > > 
> > > To avoid this issue, allocate the msg_id cyclically to avoid reusing the
> > > msg_id for a very short duration of time.
> > > 
> > > Fixes: c8383054506c ("cachefiles: notify the user daemon when looking up cookie")
> > > Signed-off-by: Baokun Li <libaokun1@xxxxxxxxxx>
> > > ---
> > >   fs/cachefiles/internal.h |  1 +
> > >   fs/cachefiles/ondemand.c | 20 ++++++++++++++++----
> > >   2 files changed, 17 insertions(+), 4 deletions(-)
> > > 
> > > diff --git a/fs/cachefiles/internal.h b/fs/cachefiles/internal.h
> > > index 8ecd296cc1c4..9200c00f3e98 100644
> > > --- a/fs/cachefiles/internal.h
> > > +++ b/fs/cachefiles/internal.h
> > > @@ -128,6 +128,7 @@ struct cachefiles_cache {
> > >   	unsigned long			req_id_next;
> > >   	struct xarray			ondemand_ids;	/* xarray for ondemand_id allocation */
> > >   	u32				ondemand_id_next;
> > > +	u32				msg_id_next;
> > >   };
> > >   
> > >   static inline bool cachefiles_in_ondemand_mode(struct cachefiles_cache *cache)
> > > diff --git a/fs/cachefiles/ondemand.c b/fs/cachefiles/ondemand.c
> > > index f6440b3e7368..b10952f77472 100644
> > > --- a/fs/cachefiles/ondemand.c
> > > +++ b/fs/cachefiles/ondemand.c
> > > @@ -433,20 +433,32 @@ static int cachefiles_ondemand_send_req(struct cachefiles_object *object,
> > >   		smp_mb();
> > >   
> > >   		if (opcode == CACHEFILES_OP_CLOSE &&
> > > -			!cachefiles_ondemand_object_is_open(object)) {
> > > +		    !cachefiles_ondemand_object_is_open(object)) {
> > >   			WARN_ON_ONCE(object->ondemand->ondemand_id == 0);
> > >   			xas_unlock(&xas);
> > >   			ret = -EIO;
> > >   			goto out;
> > >   		}
> > >   
> > > -		xas.xa_index = 0;
> > > +		/*
> > > +		 * Cyclically find a free xas to avoid msg_id reuse that would
> > > +		 * cause the daemon to successfully copen a stale msg_id.
> > > +		 */
> > > +		xas.xa_index = cache->msg_id_next;
> > >   		xas_find_marked(&xas, UINT_MAX, XA_FREE_MARK);
> > > +		if (xas.xa_node == XAS_RESTART) {
> > > +			xas.xa_index = 0;
> > > +			xas_find_marked(&xas, cache->msg_id_next - 1, XA_FREE_MARK);
> > > +		}
> > >   		if (xas.xa_node == XAS_RESTART)
> > >   			xas_set_err(&xas, -EBUSY);
> > > +
> > >   		xas_store(&xas, req);
> > > -		xas_clear_mark(&xas, XA_FREE_MARK);
> > > -		xas_set_mark(&xas, CACHEFILES_REQ_NEW);
> > > +		if (xas_valid(&xas)) {
> > > +			cache->msg_id_next = xas.xa_index + 1;
> > If you have a long-standing stuck request, could this counter wrap
> > around and you still end up with reuse?
> Yes, msg_id_next is declared to be of type u32 in the hope that when
> xa_index == UINT_MAX, a wrap around occurs so that msg_id_next
> goes to zero. Limiting xa_index to no more than UINT_MAX is to avoid
> the xarry being too deep.
> 
> If msg_id_next is equal to the id of a long-standing stuck request
> after the wrap-around, it is true that the reuse in the above problem
> may also occur.
> 
> But I feel that a long stuck request is problematic in itself, it means
> that after we have sent 4294967295 requests, the first one has not
> been processed yet, and even if we send a million requests per
> second, this one hasn't been completed for more than an hour.
> 
> We have a keep-alive process that pulls the daemon back up as
> soon as it exits, and there is a timeout mechanism for requests in
> the daemon to prevent the kernel from waiting for long periods
> of time. In other words, we should avoid the situation where
> a request is stuck for a long period of time.
> 
> If you think UINT_MAX is not enough, perhaps we could raise
> the maximum value of msg_id_next to ULONG_MAX?
> > Maybe this should be using
> > ida_alloc/free instead, which would prevent that too?
> > 
> The id reuse here is that the kernel has finished the open request
> req_A and freed its id_A and used it again when sending the open
> request req_B, but the daemon is still working on req_A, so the
> copen id_A succeeds but operates on req_B.
> 
> The id that is being used by the kernel will not be allocated here
> so it seems that ida _alloc/free does not prevent reuse either,
> could you elaborate a bit more how this works?
> 

ida_alloc and free absolutely prevent reuse while the id is in use.
That's sort of the point of those functions. Basically it uses a set of
bitmaps in an xarray to track which IDs are in use, so ida_alloc only
hands out values which are not in use. See the comments over
ida_alloc_range() in lib/idr.c.


> > 
> > > +			xas_clear_mark(&xas, XA_FREE_MARK);
> > > +			xas_set_mark(&xas, CACHEFILES_REQ_NEW);
> > > +		}
> > >   		xas_unlock(&xas);
> > >   	} while (xas_nomem(&xas, GFP_KERNEL));
> > >   
> 
> Thanks again!
> 

-- 
Jeff Layton <jlayton@xxxxxxxxxx>





[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [NTFS 3]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [NTFS 3]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux