On Tuesday, May 14, 2024 02:50 EEST, Kees Cook <keescook@xxxxxxxxxxxx> wrote:
> On Fri, May 03, 2024 at 11:57:56AM +0200, Christian Brauner wrote:
> > On Fri, Apr 26, 2024 at 04:10:49PM -0700, Kees Cook wrote:
> > > On Tue, Apr 09, 2024 at 08:57:49PM +0300, Adrian Ratiu wrote:
> > > > Prior to v2.6.39 write access to /proc/<pid>/mem was restricted,
> > > > after which it got allowed in commit 198214a7ee50 ("proc: enable
> > > > writing to /proc/pid/mem"). Famous last words from that patch:
> > > > "no longer a security hazard". :)
> > > >
> > > > Afterwards exploits started causing drama like [1]. The exploits
> > > > using /proc/*/mem can be rather sophisticated like [2] which
> > > > installed an arbitrary payload from noexec storage into a running
> > > > process then exec'd it, which itself could include an ELF loader
> > > > to run arbitrary code off noexec storage.
> > > >
> > > > One of the well-known problems with /proc/*/mem writes is they
> > > > ignore page permissions via FOLL_FORCE, as opposed to writes via
> > > > process_vm_writev which respect page permissions. These writes can
> > > > also be used to bypass mode bits.
> > > >
> > > > To harden against these types of attacks, distrbutions might want
> > > > to restrict /proc/pid/mem accesses, either entirely or partially,
> > > > for eg. to restrict FOLL_FORCE usage.
> > > >
> > > > Known valid use-cases which still need these accesses are:
> > > >
> > > > * Debuggers which also have ptrace permissions, so they can access
> > > > memory anyway via PTRACE_POKEDATA & co. Some debuggers like GDB
> > > > are designed to write /proc/pid/mem for basic functionality.
> > > >
> > > > * Container supervisors using the seccomp notifier to intercept
> > > > syscalls and rewrite memory of calling processes by passing
> > > > around /proc/pid/mem file descriptors.
> > > >
> > > > There might be more, that's why these params default to disabled.
> > > >
> > > > Regarding other mechanisms which can block these accesses:
> > > >
> > > > * seccomp filters can be used to block mmap/mprotect calls with W|X
> > > > perms, but they often can't block open calls as daemons want to
> > > > read/write their runtime state and seccomp filters cannot check
> > > > file paths, so plain write calls can't be easily blocked.
> > > >
> > > > * Since the mem file is part of the dynamic /proc/<pid>/ space, we
> > > > can't run chmod once at boot to restrict it (and trying to react
> > > > to every process and run chmod doesn't scale, and the kernel no
> > > > longer allows chmod on any of these paths).
> > > >
> > > > * SELinux could be used with a rule to cover all /proc/*/mem files,
> > > > but even then having multiple ways to deny an attack is useful in
> > > > case one layer fails.
> > > >
> > > > Thus we introduce three kernel parameters to restrict /proc/*/mem
> > > > access: read, write and foll_force. All three can be independently
> > > > set to the following values:
> > > >
> > > > all => restrict all access unconditionally.
> > > > ptracer => restrict all access except for ptracer processes.
> > > >
> > > > If left unset, the existing behaviour is preserved, i.e. access
> > > > is governed by basic file permissions.
> > > >
> > > > Examples which can be passed by bootloaders:
> > > >
> > > > restrict_proc_mem_foll_force=all
> > > > restrict_proc_mem_write=ptracer
> > > > restrict_proc_mem_read=ptracer
> > > >
> > > > Each distribution needs to decide what restrictions to apply,
> > > > depending on its use-cases. Embedded systems might want to do
> > > > more, while general-purpouse distros might want a more relaxed
> > > > policy, because for e.g. foll_force=all and write=all both break
> > > > break GDB, so it might be a bit excessive.
> > > >
> > > > Based on an initial patch by Mike Frysinger <vapier@xxxxxxxxxxxx>.
> > >
> > > Thanks for this new version!
> > >
> > > >
> > > > Link: https://lwn.net/Articles/476947/ [1]
> > > > Link: https://issues.chromium.org/issues/40089045 [2]
> > > > Cc: Guenter Roeck <groeck@xxxxxxxxxxxx>
> > > > Cc: Doug Anderson <dianders@xxxxxxxxxxxx>
> > > > Cc: Kees Cook <keescook@xxxxxxxxxxxx>
> > > > Cc: Jann Horn <jannh@xxxxxxxxxx>
> > > > Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
> > > > Cc: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
> > > > Cc: Christian Brauner <brauner@xxxxxxxxxx>
> > > > Co-developed-by: Mike Frysinger <vapier@xxxxxxxxxxxx>
> > > > Signed-off-by: Mike Frysinger <vapier@xxxxxxxxxxxx>
> > > > Signed-off-by: Adrian Ratiu <adrian.ratiu@xxxxxxxxxxxxx>
> > > > ---
> > > > .../admin-guide/kernel-parameters.txt | 27 +++++
> > > > fs/proc/base.c | 103 +++++++++++++++++-
> > > > include/linux/jump_label.h | 5 +
> > > > 3 files changed, 133 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> > > > index 6e62b8cb19c8d..d7f7db41369c7 100644
> > > > --- a/Documentation/admin-guide/kernel-parameters.txt
> > > > +++ b/Documentation/admin-guide/kernel-parameters.txt
> > > > @@ -5665,6 +5665,33 @@
> > > > reset_devices [KNL] Force drivers to reset the underlying device
> > > > during initialization.
> > > >
> > > > + restrict_proc_mem_read= [KNL]
> > > > + Format: {all | ptracer}
> > > > + Allows restricting read access to /proc/*/mem files.
> > > > + Depending on restriction level, open for reads return -EACCESS.
> > > > + Can be one of:
> > > > + - 'all' restricts all access unconditionally.
> > > > + - 'ptracer' allows access only for ptracer processes.
> > > > + If not specified, then basic file permissions continue to apply.
> > > > +
> > > > + restrict_proc_mem_write= [KNL]
> > > > + Format: {all | ptracer}
> > > > + Allows restricting write access to /proc/*/mem files.
> > > > + Depending on restriction level, open for writes return -EACCESS.
> > > > + Can be one of:
> > > > + - 'all' restricts all access unconditionally.
> > > > + - 'ptracer' allows access only for ptracer processes.
> > > > + If not specified, then basic file permissions continue to apply.
> > > > +
> > > > + restrict_proc_mem_foll_force= [KNL]
> > > > + Format: {all | ptracer}
> > > > + Restricts the use of the FOLL_FORCE flag for /proc/*/mem access.
> > > > + If restricted, the FOLL_FORCE flag will not be added to vm accesses.
> > > > + Can be one of:
> > > > + - 'all' restricts all access unconditionally.
> > > > + - 'ptracer' allows access only for ptracer processes.
> > > > + If not specified, FOLL_FORCE is always used.
> > >
> > > bike shedding: I wonder if this should be a fake namespace (adding a dot
> > > just to break it up for reading more easily), and have words reordered
> > > to the kernel's more common subject-verb-object: proc_mem.restrict_read=...
> > >
> > > > +
> > > > resume= [SWSUSP]
> > > > Specify the partition device for software suspend
> > > > Format:
> > > > diff --git a/fs/proc/base.c b/fs/proc/base.c
> > > > index 18550c071d71c..c733836c42a65 100644
> > > > --- a/fs/proc/base.c
> > > > +++ b/fs/proc/base.c
> > > > @@ -152,6 +152,41 @@ struct pid_entry {
> > > > NULL, &proc_pid_attr_operations, \
> > > > { .lsmid = LSMID })
> > > >
> > > > +/*
> > > > + * each restrict_proc_mem_* param controls the following static branches:
> > > > + * key[0] = restrict all writes
> > > > + * key[1] = restrict writes except for ptracers
> > > > + * key[2] = restrict all reads
> > > > + * key[3] = restrict reads except for ptracers
> > > > + * key[4] = restrict all FOLL_FORCE usage
> > > > + * key[5] = restrict FOLL_FORCE usage except for ptracers
> > > > + */
> > > > +DEFINE_STATIC_KEY_ARRAY_FALSE_RO(restrict_proc_mem, 6);
> > >
> > > So, I don't like having open-coded numbers. And I'm not sure there's a
> > > benefit to stuffing these all into an array? So:
> > >
> > > DEFINE_STATIC_KEY_FALSE_RO(proc_mem_restrict_read);
> > > DEFINE_STATIC_KEY_FALSE_RO(proc_mem_restrict_write);
> > > DEFINE_STATIC_KEY_FALSE_RO(proc_mem_restrict_foll_force);
> > >
> > > > +
> > > > +static int __init early_restrict_proc_mem(char *buf, int offset)
> > > > +{
> > > > + if (!buf)
> > > > + return -EINVAL;
> > > > +
> > > > + if (strncmp(buf, "all", 3) == 0)
> > >
> > > I'd use strcmp() to get exact matches. That way "allalksdjflas" doesn't
> > > match. :)
> > >
> > > > + static_branch_enable(&restrict_proc_mem[offset]);
> > > > + else if (strncmp(buf, "ptracer", 7) == 0)
> > > > + static_branch_enable(&restrict_proc_mem[offset + 1]);
> > > > +
> > > > + return 0;
> > > > +}
> > >
> > > Then don't bother with a common helper since you've got a macro, and
> > > it'll all get tossed after __init anyway.
> > >
> > > > +
> > > > +#define DEFINE_EARLY_RESTRICT_PROC_MEM(name, offset) \
> > > > +static int __init early_restrict_proc_mem_##name(char *buf) \
> > > > +{ \
> > > > + return early_restrict_proc_mem(buf, offset); \
> > > > +} \
> > > > +early_param("restrict_proc_mem_" #name, early_restrict_proc_mem_##name)
> > > > +
> > > > +DEFINE_EARLY_RESTRICT_PROC_MEM(write, 0);
> > > > +DEFINE_EARLY_RESTRICT_PROC_MEM(read, 2);
> > > > +DEFINE_EARLY_RESTRICT_PROC_MEM(foll_force, 4);
> > >
> > > #define DEFINE_EARLY_PROC_MEM_RESTRICT(name) \
> > > static int __init early_proc_mem_restrict_##name(char *buf) \
> > > { \
> > > if (!buf) \
> > > return -EINVAL; \
> > > \
> > > if (strcmp(buf, "all") == 0) \
> > > static_branch_enable(&proc_mem_restrict_##name); \
> > > else if (strcmp(buf, "ptracer") == 0) \
> > > static_branch_enable(&proc_mem_restrict_##name); \
> > > \
> > > return 0; \
> > > } \
> > > early_param("proc_mem_restrict_" #name, early_proc_mem_restrict_##name)
> > >
> > >
> > > > +
> > > > /*
> > > > * Count the number of hardlinks for the pid_entry table, excluding the .
> > > > * and .. links.
> > > > @@ -825,9 +860,58 @@ static int __mem_open(struct inode *inode, struct file *file, unsigned int mode)
> > > > return 0;
> > > > }
> > > >
> > > > +static bool __mem_open_current_is_ptracer(struct file *file)
> > > > +{
> > > > + struct inode *inode = file_inode(file);
> > > > + struct task_struct *task = get_proc_task(inode);
> > > > + int ret = false;
> > > > +
> > > > + if (task) {
> > > > + rcu_read_lock();
> > > > + if (current == ptrace_parent(task))
> > > > + ret = true;
> > > > + rcu_read_unlock();
> > > > + put_task_struct(task);
> > > > + }
> > >
> > > This creates a ToCToU race between this check (which releases the task)
> > > and the later memopen which make get a different task (and mm).
> > >
> > > To deal with this, I think you need to add a new mode flag for
> > > proc_mem_open(), and add the checking there.
> > >
> > > > +
> > > > + return ret;
> > > > +}
> > > > +
> > > > +static int __mem_open_check_access_restriction(struct file *file)
> > > > +{
> > > > + if (file->f_mode & FMODE_WRITE) {
> > > > + /* Deny if writes are unconditionally disabled via param */
> > > > + if (static_branch_unlikely(&restrict_proc_mem[0]))
> > > > + return -EACCES;
> > > > +
> > > > + /* Deny if writes are allowed only for ptracers via param */
> > > > + if (static_branch_unlikely(&restrict_proc_mem[1]) &&
> > > > + !__mem_open_current_is_ptracer(file))
> > > > + return -EACCES;
> > > > +
> > > > + } else if (file->f_mode & FMODE_READ) {
> > >
> > > I think this "else" means that O_RDWR opens will only check the write
> > > flag, so drop the "else".
> > >
> > > > + /* Deny if reads are unconditionally disabled via param */
> > > > + if (static_branch_unlikely(&restrict_proc_mem[2]))
> > > > + return -EACCES;
> > > > +
> > > > + /* Deny if reads are allowed only for ptracers via param */
> > > > + if (static_branch_unlikely(&restrict_proc_mem[3]) &&
> > > > + !__mem_open_current_is_ptracer(file))
> > > > + return -EACCES;
> > > > + }
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > static int mem_open(struct inode *inode, struct file *file)
> > > > {
> > > > - int ret = __mem_open(inode, file, PTRACE_MODE_ATTACH);
> > > > + int ret;
> > > > +
> > > > + ret = __mem_open_check_access_restriction(file);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + ret = __mem_open(inode, file, PTRACE_MODE_ATTACH);
> > > >
> > > > /* OK to pass negative loff_t, we can catch out-of-range */
> > > > file->f_mode |= FMODE_UNSIGNED_OFFSET;
> > > > @@ -835,6 +919,20 @@ static int mem_open(struct inode *inode, struct file *file)
> > > > return ret;
> > > > }
> > > >
> > > > +static unsigned int __mem_rw_get_foll_force_flag(struct file *file)
> > > > +{
> > > > + /* Deny if FOLL_FORCE is disabled via param */
> > > > + if (static_branch_unlikely(&restrict_proc_mem[4]))
> > > > + return 0;
> > > > +
> > > > + /* Deny if FOLL_FORCE is allowed only for ptracers via param */
> > > > + if (static_branch_unlikely(&restrict_proc_mem[5]) &&
> > > > + !__mem_open_current_is_ptracer(file))
> > >
> > > This is like the ToCToU: the task may have changed out from under us
> > > between the open the read/write.
> >
> > But why would you care? As long as the task is the ptracer it doesn't
> > really matter afaict.
>
> Because the mm you're writing to may no longer be associated with the
> task.
>
> proc_mem_operations.open() will take a reference to the current task's
> mm, via proc_mem_open() through __mem_open():
>
> struct task_struct *task = get_proc_task(inode);
> ...
> mm = mm_access(task, mode | PTRACE_MODE_FSCREDS);
> ...
> file->private_data = mm;
>
>
> And in the proposed check added to mem_rw(), if get_proc_task(inode)
> returns a different task (i.e. the pid got recycled and the original mm
> is still associated with a forked task), then it could write to the
> forked task using the ptrace check against the new task.
>
> Looking at it again now, I think it should be possible to just revalidate
> the mm in __mem_open_current_is_ptracer(), though. i.e. it would be
> allowed if ptrace check passes and file->private_data == mm_access(...),
> for the mem_rw case...
Ack, I'll do this in v4, thanks again!
