[PATCH 5/5] selftests/bpf: a simple benchmark tool for /proc/<pid>/maps APIs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Implement a simple tool/benchmark for comparing address "resolution"
logic based on textual /proc/<pid>/maps interface and new binary
ioctl-based PROCFS_PROCMAP_QUERY command.

The tool expects a file with a list of hex addresses, relevant PID, and
then provides control over whether textual or binary ioctl-based ways to
process VMAs should be used.

The overall logic implements as efficient way to do batched processing
of a given set of (unsorted) addresses. We first sort them in increasing
order (remembering their original position to restore original order, if
necessary), and then process all VMAs from /proc/<pid>/maps, matching
addresses to VMAs and calculating file offsets, if matched. For
ioctl-based approach the idea is similar, but is implemented even more
efficiently, requesting only VMAs that cover all given addresses,
skipping all the irrelevant VMAs altogether.

To be able to compare efficiency of both APIs tool has "benchark" mode.
User provides a number of processing runs to run in a tight loop, timing
specifically /proc/<pid>/maps parsing and processing parts of the logic
only. Address sorting and re-sorting is excluded. This gives a more
direct way to compare ioctl- vs text-based APIs.

We used a medium-sized production application to do representative
benchmark. A bunch of stack traces were captured, resulting in 4435
user space addresses (699 unique ones, but we didn't deduplicate them).
Application itself had 702 VMAs reported in /proc/<pid>/maps.

Averaging time taken to process all addresses 10000 times, showed that:
  - text-based approach took 380 microseconds *per one batch run*;
  - ioctl-based approach took 10 microseconds *per identical batch run*.

This gives about ~35x speed up to do exactly the same amoun of work
(build IDs were not fetched for ioctl-based benchmark; fetching build
IDs resulted in 2x slowdown compared to no-build-ID case).

I also did an strace run of both cases. In text-based one the tool did
68 read() syscalls, fetching up to 4KB of data in one go. In comparison,
ioctl-based implementation had to do only 6 ioctl() calls to fetch all
relevant VMAs.

It is projected that savings from processing big production applications
would only widen the gap in favor of binary-based querying ioctl API, as
bigger applications will tend to have even more non-executable VMA
mappings relative to executable ones.

Signed-off-by: Andrii Nakryiko <andrii@xxxxxxxxxx>
---
 tools/testing/selftests/bpf/.gitignore     |   1 +
 tools/testing/selftests/bpf/Makefile       |   2 +-
 tools/testing/selftests/bpf/procfs_query.c | 366 +++++++++++++++++++++
 3 files changed, 368 insertions(+), 1 deletion(-)
 create mode 100644 tools/testing/selftests/bpf/procfs_query.c

diff --git a/tools/testing/selftests/bpf/.gitignore b/tools/testing/selftests/bpf/.gitignore
index f1aebabfb017..7eaa8f417278 100644
--- a/tools/testing/selftests/bpf/.gitignore
+++ b/tools/testing/selftests/bpf/.gitignore
@@ -45,6 +45,7 @@ test_cpp
 /veristat
 /sign-file
 /uprobe_multi
+/procfs_query
 *.ko
 *.tmp
 xskxceiver
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index ba28d42b74db..07e17bb89767 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -131,7 +131,7 @@ TEST_GEN_PROGS_EXTENDED = test_sock_addr test_skb_cgroup_id_user \
 	flow_dissector_load test_flow_dissector test_tcp_check_syncookie_user \
 	test_lirc_mode2_user xdping test_cpp runqslower bench bpf_testmod.ko \
 	xskxceiver xdp_redirect_multi xdp_synproxy veristat xdp_hw_metadata \
-	xdp_features bpf_test_no_cfi.ko
+	xdp_features bpf_test_no_cfi.ko procfs_query
 
 TEST_GEN_FILES += liburandom_read.so urandom_read sign-file uprobe_multi
 
diff --git a/tools/testing/selftests/bpf/procfs_query.c b/tools/testing/selftests/bpf/procfs_query.c
new file mode 100644
index 000000000000..8ca3978244ad
--- /dev/null
+++ b/tools/testing/selftests/bpf/procfs_query.c
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause)
+#include <argp.h>
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <time.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <sys/ioctl.h>
+#include <linux/fs.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <time.h>
+
+static bool verbose;
+static bool quiet;
+static bool use_ioctl;
+static bool request_build_id;
+static char *addrs_path;
+static int pid;
+static int bench_runs;
+
+const char *argp_program_version = "procfs_query 0.0";
+const char *argp_program_bug_address = "<bpf@xxxxxxxxxxxxxxx>";
+
+static inline uint64_t get_time_ns(void)
+{
+	struct timespec t;
+
+	clock_gettime(CLOCK_MONOTONIC, &t);
+
+	return (uint64_t)t.tv_sec * 1000000000 + t.tv_nsec;
+}
+
+static const struct argp_option opts[] = {
+	{ "verbose", 'v', NULL, 0, "Verbose mode" },
+	{ "quiet", 'q', NULL, 0, "Quiet mode (no output)" },
+	{ "pid", 'p', "PID", 0, "PID of the process" },
+	{ "addrs-path", 'f', "PATH", 0, "File with addresses to resolve" },
+	{ "benchmark", 'B', "RUNS", 0, "Benchmark mode" },
+	{ "query", 'Q', NULL, 0, "Use ioctl()-based point query API (by default text parsing is done)" },
+	{ "build-id", 'b', NULL, 0, "Fetch build ID, if available (only for ioctl mode)" },
+	{},
+};
+
+static error_t parse_arg(int key, char *arg, struct argp_state *state)
+{
+	switch (key) {
+	case 'v':
+		verbose = true;
+		break;
+	case 'q':
+		quiet = true;
+		break;
+	case 'i':
+		use_ioctl = true;
+		break;
+	case 'b':
+		request_build_id = true;
+		break;
+	case 'p':
+		pid = strtol(arg, NULL, 10);
+		break;
+	case 'f':
+		addrs_path = strdup(arg);
+		break;
+	case 'B':
+		bench_runs = strtol(arg, NULL, 10);
+		if (bench_runs <= 0) {
+			fprintf(stderr, "Invalid benchmark run count: %s\n", arg);
+			return -EINVAL;
+		}
+		break;
+	case ARGP_KEY_ARG:
+		argp_usage(state);
+		break;
+	default:
+		return ARGP_ERR_UNKNOWN;
+	}
+	return 0;
+}
+
+static const struct argp argp = {
+	.options = opts,
+	.parser = parse_arg,
+};
+
+struct addr {
+	unsigned long long addr;
+	int idx;
+};
+
+static struct addr *addrs;
+static size_t addr_cnt, addr_cap;
+
+struct resolved_addr {
+	unsigned long long file_off;
+	const char *vma_name;
+	int build_id_sz;
+	char build_id[20];
+};
+
+static struct resolved_addr *resolved;
+
+static int resolve_addrs_ioctl(void)
+{
+	char buf[32], build_id_buf[20], vma_name[PATH_MAX];
+	struct procfs_procmap_query q;
+	int fd, err, i;
+	struct addr *a = &addrs[0];
+	struct resolved_addr *r;
+
+	snprintf(buf, sizeof(buf), "/proc/%d/maps", pid);
+	fd = open(buf, O_RDONLY);
+	if (fd < 0) {
+		err = -errno;
+		fprintf(stderr, "Failed to open process map file (%s): %d\n", buf, err);
+		return err;
+	}
+
+	memset(&q, 0, sizeof(q));
+	q.size = sizeof(q);
+	q.query_flags = PROCFS_PROCMAP_EXACT_OR_NEXT_VMA;
+	q.vma_name_addr = (__u64)vma_name;
+	if (request_build_id)
+		q.build_id_addr = (__u64)build_id_buf;
+
+	for (i = 0; i < addr_cnt; ) {
+		char *name = NULL;
+
+		q.query_addr = (__u64)a->addr;
+		q.vma_name_size = sizeof(vma_name);
+		if (request_build_id)
+			q.build_id_size = sizeof(build_id_buf);
+
+		err = ioctl(fd, PROCFS_PROCMAP_QUERY, &q);
+		if (err < 0 && errno == ENOTTY) {
+			close(fd);
+			fprintf(stderr, "PROCFS_PROCMAP_QUERY ioctl() command is not supported on this kernel!\n");
+			return -EOPNOTSUPP; /* ioctl() not implemented yet */
+		}
+		if (err < 0 && errno == ENOENT) {
+			fprintf(stderr, "ENOENT\n");
+			i++;
+			a++;
+			continue; /* unresolved address */
+		}
+		if (err < 0) {
+			err = -errno;
+			close(fd);
+			fprintf(stderr, "PROCFS_PROCMAP_QUERY ioctl() returned error: %d\n", err);
+			return err;
+		}
+
+		/* skip addrs falling before current VMA */
+		for (; i < addr_cnt && a->addr < q.vma_start; i++, a++) {
+		}
+		/* process addrs covered by current VMA */
+		for (; i < addr_cnt && a->addr < q.vma_end; i++, a++) {
+			r = &resolved[a->idx];
+			r->file_off = a->addr - q.vma_start + q.vma_offset;
+
+			/* reuse name, if it was already strdup()'ed */
+			if (q.vma_name_size)
+				name = name ?: strdup(vma_name);
+			r->vma_name = name;
+
+			if (q.build_id_size) {
+				r->build_id_sz = q.build_id_size;
+				memcpy(r->build_id, build_id_buf, q.build_id_size);
+			}
+		}
+	}
+
+	close(fd);
+	return 0;
+}
+
+static int resolve_addrs_parse(void)
+{
+	size_t vma_start, vma_end, vma_offset, ino;
+	uint32_t dev_major, dev_minor;
+	char perms[4], buf[32], vma_name[PATH_MAX];
+	FILE *f;
+	int err, idx = 0;
+	struct addr *a = &addrs[idx];
+	struct resolved_addr *r;
+
+	snprintf(buf, sizeof(buf), "/proc/%d/maps", pid);
+	f = fopen(buf, "r");
+	if (!f) {
+		err = -errno;
+		fprintf(stderr, "Failed to open process map file (%s): %d\n", buf, err);
+		return err;
+	}
+
+	while ((err = fscanf(f, "%zx-%zx %c%c%c%c %zx %x:%x %zu %[^\n]\n",
+			     &vma_start, &vma_end,
+			     &perms[0], &perms[1], &perms[2], &perms[3],
+			     &vma_offset, &dev_major, &dev_minor, &ino, vma_name)) >= 10) {
+		const char *name = NULL;
+
+		/* skip addrs before current vma, they stay unresolved */
+		for (; idx < addr_cnt && a->addr < vma_start; idx++, a++) {
+		}
+
+		/* resolve all addrs within current vma now */
+		for (; idx < addr_cnt && a->addr < vma_end; idx++, a++) {
+			r = &resolved[a->idx];
+			r->file_off = a->addr - vma_start + vma_offset;
+
+			/* reuse name, if it was already strdup()'ed */
+			if (err > 10)
+				name = name ?: strdup(vma_name);
+			else
+				name = NULL;
+			r->vma_name = name;
+		}
+
+		/* ran out of addrs to resolve, stop early */
+		if (idx >= addr_cnt)
+			break;
+	}
+
+	fclose(f);
+	return 0;
+}
+
+static int cmp_by_addr(const void *a, const void *b)
+{
+	const struct addr *x = a, *y = b;
+
+	if (x->addr != y->addr)
+		return x->addr < y->addr ? -1 : 1;
+	return x->idx < y->idx ? -1 : 1;
+}
+
+static int cmp_by_idx(const void *a, const void *b)
+{
+	const struct addr *x = a, *y = b;
+
+	return x->idx < y->idx ? -1 : 1;
+}
+
+int main(int argc, char **argv)
+{
+	FILE* f;
+	int err, i;
+	unsigned long long addr;
+	uint64_t start_ns;
+	double total_ns;
+
+	/* Parse command line arguments */
+	err = argp_parse(&argp, argc, argv, 0, NULL, NULL);
+	if (err)
+		return err;
+
+	if (pid <= 0 || !addrs_path) {
+		fprintf(stderr, "Please provide PID and file with addresses to process!\n");
+		exit(1);
+	}
+
+	if (verbose) {
+		fprintf(stderr, "PID: %d\n", pid);
+		fprintf(stderr, "PATH: %s\n", addrs_path);
+	}
+
+	f = fopen(addrs_path, "r");
+	if (!f) {
+		err = -errno;
+		fprintf(stderr, "Failed to open '%s': %d\n", addrs_path, err);
+		goto out;
+	}
+
+	while ((err = fscanf(f, "%llx\n", &addr)) == 1) {
+		if (addr_cnt == addr_cap) {
+			addr_cap = addr_cap == 0 ? 16 : (addr_cap * 3 / 2);
+			addrs = realloc(addrs, sizeof(*addrs) * addr_cap);
+			memset(addrs + addr_cnt, 0, (addr_cap - addr_cnt) * sizeof(*addrs));
+		}
+
+		addrs[addr_cnt].addr = addr;
+		addrs[addr_cnt].idx = addr_cnt;
+
+		addr_cnt++;
+	}
+	if (verbose)
+		fprintf(stderr, "READ %zu addrs!\n", addr_cnt);
+	if (!feof(f)) {
+		fprintf(stderr, "Failure parsing full list of addresses at '%s'!\n", addrs_path);
+		err = -EINVAL;
+		fclose(f);
+		goto out;
+	}
+	fclose(f);
+	if (addr_cnt == 0) {
+		fprintf(stderr, "No addresses provided, bailing out!\n");
+		err = -ENOENT;
+		goto out;
+	}
+
+	resolved = calloc(addr_cnt, sizeof(*resolved));
+
+	qsort(addrs, addr_cnt, sizeof(*addrs), cmp_by_addr);
+	if (verbose) {
+		fprintf(stderr, "SORTED ADDRS (%zu):\n", addr_cnt);
+		for (i = 0; i < addr_cnt; i++) {
+			fprintf(stderr, "ADDR #%d: %#llx\n", addrs[i].idx, addrs[i].addr);
+		}
+	}
+
+	start_ns = get_time_ns();
+	for (i = bench_runs ?: 1; i > 0; i--) {
+		if (use_ioctl) {
+			err = resolve_addrs_ioctl();
+		} else {
+			err = resolve_addrs_parse();
+		}
+		if (err) {
+			fprintf(stderr, "Failed to resolve addrs: %d!\n", err);
+			goto out;
+		}
+	}
+	total_ns = get_time_ns() - start_ns;
+
+	if (bench_runs) {
+		fprintf(stderr, "BENCHMARK MODE. RUNS: %d TOTAL TIME (ms): %.3lf TIME/RUN (ms): %.3lf TIME/ADDR (us): %.3lf\n",
+			bench_runs, total_ns / 1000000.0, total_ns / bench_runs / 1000000.0,
+			total_ns / bench_runs / addr_cnt / 1000.0);
+	}
+
+	/* sort them back into the original order */
+	qsort(addrs, addr_cnt, sizeof(*addrs), cmp_by_idx);
+
+	if (!quiet) {
+		printf("RESOLVED ADDRS (%zu):\n", addr_cnt);
+		for (i = 0; i < addr_cnt; i++) {
+			const struct addr *a = &addrs[i];
+			const struct resolved_addr *r = &resolved[a->idx];
+
+			if (r->file_off) {
+				printf("RESOLVED   #%d: %#llx -> OFF %#llx",
+					a->idx, a->addr, r->file_off);
+				if (r->vma_name)
+					printf(" NAME %s", r->vma_name);
+				if (r->build_id_sz) {
+					char build_id_str[41];
+					int j;
+
+					for (j = 0; j < r->build_id_sz; j++)
+						sprintf(&build_id_str[j * 2], "%02hhx", r->build_id[j]);
+					printf(" BUILDID %s", build_id_str);
+				}
+				printf("\n");
+			} else {
+				printf("UNRESOLVED #%d: %#llx\n", a->idx, a->addr);
+			}
+		}
+	}
+out:
+	free(addrs);
+	free(addrs_path);
+	free(resolved);
+
+	return err < 0 ? -err : 0;
+}
-- 
2.43.0





[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [NTFS 3]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [NTFS 3]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux