Andreas Dilger wrote:
I've done some work to merge some of the existing fsx.c mods into a
single version. Over & above the version that is in the LTP, I've
included AKPM's O_DIRECT fixes (with a twist), the BSD mmap page and
segfault handling, and per-write fsync.
The twist for the O_DIRECT feature is that it will randomly open file
descriptors with O_DIRECT, and if you use the Lustre-inspired multi-fd
support (by specifying multiple pathnames for the output file) fsx will
be testing buffered and O_DIRECT and mmap IO on the same file.
Updated patch to have proper fallocate() handling in case glibc doesn't
have this, for non-x86 architectures from MingMing Cao, based on code
used by DB2.
Signed-off-by: Andreas Dilger <adilger@xxxxxxx>
And here's a patch on top of that to implement random fallocate
calls during the runs rather than just one at the beginning.
This was a fairly quick patch merge from one I did for xfstests'
version of fsx, but it seems to run properly.
Signed-off-by: Eric Sandeen <sandeen@xxxxxxxxxx>
--- fsx.c.orig 2009-09-29 21:40:31.045330451 -0500
+++ fsx.c 2009-09-29 22:30:25.670330430 -0500
@@ -37,11 +37,12 @@
*
* Add multi-file testing feature -- Zach Brown <zab@xxxxxxxxxxxxx>
*
+ * Add random preallocation calls - Eric Sandeen <sandeen@xxxxxxxxxx>
+ *
* $FreeBSD: src/tools/regression/fsx/fsx.c,v 1.2 2003/04/23 23:42:23 jkh Exp $
* $DragonFly: src/test/stress/fsx/fsx.c,v 1.2 2005/05/02 19:31:56 dillon Exp $
*
*/
-
#include <sys/types.h>
#include <sys/stat.h>
#if defined(_UWIN) || defined(__linux__)
@@ -95,6 +96,7 @@
#define OP_MAPREAD 5
#define OP_MAPWRITE 6
#define OP_SKIPPED 7
+#define OP_FALLOCATE 8
int page_size;
int page_mask;
@@ -127,6 +129,7 @@
int writebdy = 1; /* -w flag */
long monitorstart = -1; /* -m flag */
long monitorend = -1; /* -m flag */
+int fallocate_calls = 1; /* -F flag disables */
int lite = 0; /* -L flag */
long numops = -1; /* -N flag */
int randomoplen = 1; /* -O flag disables it */
@@ -219,6 +222,7 @@
{
int i, count, down;
struct log_entry *lp;
+ char *falloc_type[3] = {"PAST_EOF", "EXTENDING", "INTERIOR"};
prt("LOG DUMP (%d total operations):\n", logcount);
if (logcount < LOGSIZE) {
@@ -290,6 +294,14 @@
prt("CLOSE/OPEN%s",
lp->operation & O_DIRECT ? "_OD" : " ");
break;
+ case OP_FALLOCATE:
+ /* 0: offset 1: length 2: where alloced */
+ prt("FALLOCATE %s\tfrom 0x%x to 0x%x",
+ falloc_type[lp->args[2]], lp->args[0], lp->args[0] + lp->args[1]);
+ if (badoff >= lp->args[0] &&
+ badoff < lp->args[0] + lp->args[1])
+ prt("\t******FFFF");
+ break;
case OP_SKIPPED:
prt("SKIPPED (no operation)");
break;
@@ -687,6 +699,7 @@
[OP_MAPWRITE] = "mapwrite",
[OP_READ + O_DIRECT] = "read_OD",
[OP_WRITE + O_DIRECT] = "write_OD",
+ [OP_FALLOCATE] = "fallocate",
};
if (fd_policy != FD_SINGLE)
@@ -1068,6 +1081,59 @@
output_debug(size, 0, "truncate done");
}
+/* fallocate is basically a no-op unless extending, then a lot like a truncate */
+void
+dofallocate(unsigned offset, unsigned length)
+{
+ struct timeval t;
+ unsigned end_offset;
+ int keep_size;
+ struct test_file *tf = get_tf();
+ int fd = tf->fd;
+
+ gettimeofday(&t, NULL);
+ if (length == 0) {
+ if (!quiet && testcalls > simulatedopcount)
+ prt("skipping zero length fallocate\n");
+ log4(OP_SKIPPED, OP_FALLOCATE, offset, length, &t);
+ return;
+ }
+
+ keep_size = random() % 2;
+
+ end_offset = keep_size ? 0 : offset + length;
+
+ if (end_offset > biggest) {
+ biggest = end_offset;
+ if (!quiet && testcalls > simulatedopcount)
+ prt("fallocating to largest ever: 0x%x\n", end_offset);
+ }
+
+ /*
+ * last arg:
+ * 1: allocate past EOF
+ * 2: extending prealloc
+ * 3: interior prealloc
+ */
+ log4(OP_FALLOCATE, offset, length, (end_offset > file_size) ? (keep_size ? 1 : 2) : 3, &t);
+
+ if (end_offset > file_size) {
+ memset(good_buf + file_size, '\0', end_offset - file_size);
+ file_size = end_offset;
+ }
+
+ if (testcalls <= simulatedopcount)
+ return;
+
+ output_line(tf, OP_FALLOCATE, offset, length, &t);
+
+ if (do_fallocate(fd, keep_size ? FALLOC_FL_KEEP_SIZE : 0, (loff_t)offset, (loff_t)length) == -1) {
+ prt("fallocate: %x to %x\n", offset, length);
+ prterr("dofallocate: fallocate");
+ report_failure(161);
+ }
+ output_debug(offset, length, "fallocate done");
+}
void
writefileimage()
@@ -1141,7 +1207,7 @@
unsigned long offset;
unsigned long size = maxoplen;
unsigned long rv = random();
- unsigned long op = rv % (3 + !lite + mapped_writes);
+ unsigned long op = rv % (3 + !lite + mapped_writes + fallocate_calls);
/* turn off the map read if necessary */
@@ -1160,22 +1226,32 @@
prt("%lu...\n", testcalls);
/*
- * READ: op = 0
- * WRITE: op = 1
- * MAPREAD: op = 2
- * TRUNCATE: op = 3
- * MAPWRITE: op = 3 or 4
+ * lite !lite
+ * READ: op = 0 0
+ * WRITE: op = 1 1
+ * MAPREAD: op = 2 2
+ * TRUNCATE: op = - 3
+ * MAPWRITE: op = 3 4
+ * FALLOCATE: op = - 5
*/
if (lite ? 0 : op == 3 && (style & 1) == 0) /* vanilla truncate? */
dotruncate(random() % maxfilelen);
else {
if (randomoplen)
size = random() % (maxoplen+1);
+ /* truncate */
if (lite ? 0 : op == 3)
dotruncate(size);
else {
offset = random();
- if (op == 1 || op == (lite ? 3 : 4)) {
+ /* fallocate */
+ if (op == 5) {
+ offset %= maxfilelen;
+ if (offset + size > maxfilelen)
+ size = maxfilelen - offset;
+ dofallocate(offset, size);
+ /* write / mapwrite */
+ } else if (op == 1 || op == (lite ? 3 : 4)) {
offset %= maxfilelen;
if (offset + size > maxfilelen)
size = maxfilelen - offset;
@@ -1183,6 +1259,7 @@
domapwrite(offset, size);
else
dowrite(offset, size);
+ /* read / mapread */
} else {
if (file_size)
offset %= file_size;
@@ -1227,7 +1304,7 @@
void
usage(void)
{
- fprintf(stdout, "usage: fsx [-dfnqLOW] [-b opnum] [-c Prob] [-l flen]\n"
+ fprintf(stdout, "usage: fsx [-dfnqFLOW] [-b opnum] [-c Prob] [-l flen]\n"
"\t\t[-m start:end] [-o oplen] [-p progressinterval] [-r readbdy] [-s style]\n"
"\t\t[-t truncbdy] [-w writebdy] [-D startingop] [-N numops] [-P dirpath]\n"
"\t\t[-S seed] [-Z [prob]] [ -I random|rotate ] fname [more paths to fname..]\n"
@@ -1266,6 +1343,7 @@
" each operation uses a different path. Iterate through them in\n"
" order with 'rotate' or chose then at 'random'. (defaults random)\n"
/* OSX: -I: start interactive mode since operation opnum\n" */
+" -F: Do not use fallocate (preallocation) calls\n"
" -L: fsxLite - no file creations & no file size changes\n"
/* OSX: -M: slow motion mode, wait 1 second before each op\n" */
" -N numops: total # operations to do (default infinity)\n"
@@ -1332,7 +1410,7 @@
setvbuf(stdout, (char *)0, _IOLBF, 0); /* line buffered stdout */
while ((ch = getopt(argc, argv,
- "b:c:dfl:m:no:p:qr:s:t:w:x::D:I:LN:OP:RS:WZ::"))
+ "b:c:dfl:m:no:p:qr:s:t:w:x::D:FI:LN:OP:RS:WZ::"))
!= EOF)
switch (ch) {
case 'b':
@@ -1421,6 +1499,9 @@
if (debugstart < 1)
usage();
break;
+ case 'F':
+ fallocate_calls = 0;
+ break;
case 'I':
assign_fd_policy(optarg);
break;
@@ -1557,6 +1638,15 @@
check_trunc_hack();
}
+ if (!lite && fallocate_calls) {
+ int fd = get_fd();
+ if (do_fallocate(fd, 0, 0, 1) && errno == EOPNOTSUPP) {
+ warn("main: filesystem does not support fallocate, disabling");
+ fallocate_calls = 0;
+ } else
+ ftruncate(fd, 0);
+ }
+
while (numops == -1 || numops--)
test();
--
To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
