On Mon, Apr 01, 2024 at 12:09:08PM +0000, Alice Ryhl wrote: > Christian Brauner <brauner@xxxxxxxxxx> wrote: > > On Wed, Mar 20, 2024 at 06:09:05PM +0000, Alice Ryhl wrote: > >> Christian Brauner <brauner@xxxxxxxxxx> wrote: > >>> On Fri, Feb 09, 2024 at 11:18:16AM +0000, Alice Ryhl wrote: > >>>> +/// Wraps the kernel's `struct file`. > >>>> +/// > >>>> +/// This represents an open file rather than a file on a filesystem. Processes generally reference > >>>> +/// open files using file descriptors. However, file descriptors are not the same as files. A file > >>>> +/// descriptor is just an integer that corresponds to a file, and a single file may be referenced > >>>> +/// by multiple file descriptors. > >>>> +/// > >>>> +/// # Refcounting > >>>> +/// > >>>> +/// Instances of this type are reference-counted. The reference count is incremented by the > >>>> +/// `fget`/`get_file` functions and decremented by `fput`. The Rust type `ARef<File>` represents a > >>>> +/// pointer that owns a reference count on the file. > >>>> +/// > >>>> +/// Whenever a process opens a file descriptor (fd), it stores a pointer to the file in its `struct > >>>> +/// files_struct`. This pointer owns a reference count to the file, ensuring the file isn't > >>>> +/// prematurely deleted while the file descriptor is open. In Rust terminology, the pointers in > >>>> +/// `struct files_struct` are `ARef<File>` pointers. > >>>> +/// > >>>> +/// ## Light refcounts > >>>> +/// > >>>> +/// Whenever a process has an fd to a file, it may use something called a "light refcount" as a > >>>> +/// performance optimization. Light refcounts are acquired by calling `fdget` and released with > >>>> +/// `fdput`. The idea behind light refcounts is that if the fd is not closed between the calls to > >>>> +/// `fdget` and `fdput`, then the refcount cannot hit zero during that time, as the `struct > >>>> +/// files_struct` holds a reference until the fd is closed. This means that it's safe to access the > >>>> +/// file even if `fdget` does not increment the refcount. > >>>> +/// > >>>> +/// The requirement that the fd is not closed during a light refcount applies globally across all > >>>> +/// threads - not just on the thread using the light refcount. For this reason, light refcounts are > >>>> +/// only used when the `struct files_struct` is not shared with other threads, since this ensures > >>>> +/// that other unrelated threads cannot suddenly start using the fd and close it. Therefore, > >>>> +/// calling `fdget` on a shared `struct files_struct` creates a normal refcount instead of a light > >>>> +/// refcount. > >>> > >>> When the fdget() calling task doesn't have a shared file descriptor > >>> table fdget() will not increment the reference count, yes. This > >>> also implies that you cannot have task A use fdget() and then pass > >>> f.file to task B that holds on to it while A returns to userspace. It's > >>> irrelevant that task A won't drop the reference count or that task B > >>> won't drop the reference count. Because task A could return back to > >>> userspace and immediately close the fd via a regular close() system call > >>> at which point task B has a UAF. In other words a file that has been > >>> gotten via fdget() can't be Send to another task without the Send > >>> implying taking a reference to it. > >> > >> That matches my understanding. > >> > >> I suppose that technically you can still send it to another thread *if* you > >> ensure that the current thread waits until that other thread stops using the > >> file before returning to userspace. > > > > _Technically_ yes, but it would be brittle as hell. The problem is that > > fdget() _relies_ on being single-threaded for the time that fd is used > > until fdput(). There's locking assumptions that build on that e.g., for > > concurrent read/write. So no, that shouldn't be allowed. > > > > Look at how this broke our back when we introduced pidfd_getfd() where > > we steal an fd from another task. I have a lengthy explanation how that > > can be used to violate our elided-locking which is based on assuming > > that we're always single-threaded and the file can't be suddenly shared > > with another task. So maybe doable but it would make the semantics even > > more intricate. > > Hmm, the part about elided locking is surprising to me, and may be an > issue. Can you give more details on that? Because the current So what I referred to was that we do have fdget_pos(). Roughly, if there's more than one reference on the file then we need to acquire a mutex but if it's only a single reference then we can avoid taking the mutex because we know that we're the only one that has a reference to that file and no one else can acquire one. Whether or not that mutex was taken is taken track of in struct fd. So you can't share a file after fdget_pos() has been called on it and you haven't taken the position mutex. So let's say you had: * Tread A that calls fdget_pos() on file1 and the reference count is one. So Thread A doesn't acquire the file position mutex for file1. * Now somehow that file1 becomes shared, e.g., Thread B calls fget() on it and now Thread B does some operation that requires the file position mutex. => Thread A and Thread B race on the file position. So just because you have a reference to a file from somewhere it doesn't mean you can just share it with another thread. So if yo have an arbitrary reference to a file in Rust and that somehow can be shared with another thread you risk races here. > abstractions here *do* actually allow what I described, since we > implement Sync for File. > > I'm not familiar with the pidfd_getfd discussion you are referring to. > Do you have a link? https://lore.kernel.org/linux-fsdevel/20230724-vfs-fdget_pos-v1-1-a4abfd7103f3@xxxxxxxxxx pidfd_getfd() can be used to steal a file descriptor from another task. It's like a non-cooperative SCM_RIGHTS. That means you can have exactly the scenario described above where a file assumed to be non-shared is suddenly shared and you have racing reads/writes. For readdir we nowadays always take the file position mutex because of the pidfd_getfd() business because that might corrupt internal state. > > I'm thinking that we may have to provide two different `struct file` > wrappers to accurately model this API in Rust. Perhaps they could be > called File and LocalFile, where one is marked as thread safe and the > other isn't. I can make all LocalFile methods available on File to avoid > having to duplicate methods that are available on both. But isn't that just struct file and struct fd? Ideally we'd stay close to something like this. > > But it's not clear to me that this is even enough. Even if we give you a > &LocalFile to prevent you from moving it across threads, you can just > call File::fget to get an ARef<File> to the same file and then move > *that* across threads. Yes, absolutely. > > This kind of global requirement is not so easy to model. Maybe klint [1] > could do it ... atomic context violations are a similar kind of global > check. But having klint do it would be far out. > > Or maybe File::fget should also return a LocalFile? > > But this raises a different question to me. Let's say process A uses > Binder to send its own fd to process B, and the following things happen: > > 1. Process A enters the ioctl and takes fdget on the fd. > 2. Process A calls fget on the same fd to send it to another process. > 3. Process A goes to sleep, waiting for process B to respond. > 4. Process B receives the message, installs the fd, and returns to userspace. > 5. Process B responds to the transaction, but does not close the fd. The fd just installed in 4. and the fd you're referring to in 5. are identical, right? IOW, we're not talking about two different fd (dup) for the same file, right? > 6a. Process A finishes sleeping, and returns to userspace from the ioctl. > 6b. Process B tries to do an operation (e.g. read) on the fd. > > Let's say that 6a and 6b run in parallel. > > Could this potentially result in a data race between step 6a and 6b? I'm > guessing that step 6a probably doesn't touch any of the code that has > elided locking assumptions, so in practice I guess there's not a problem > ... but if you make any sort of elided locking assumption as you exit > from the ioctl (before reaching the fdput), then it seems to me that you > have a problem. Yes, 6a doesn't touch any code that has elided locking assumptions. 1'. Process A enters the ioctl and takes fdget() on the fd. Process A holds the only reference to that file and the file descriptor table isn't shared. Therefore, f_count is left untouched and remains at 1. 2'. Process A calls fget() which unconditionally bumps f_count bringing it to 2 and sending it another process (Presumably you intend to imply that this reference is now owned by the second process.). 3'. [as 3.] 4'. Process B installs the file into it's file descriptor table consuming that reference from 2'. The f_count remains at 2 with the reference from 2' now being owned by Process B. 5'. Since Process B isn't closing the fd and has just called fd_install() it returns to userspace with f_count untouched and still at 2. 6'a. Process A finishes sleeping and returns to userspace calling fdput(). Since the original fdget() was done without bumping the reference count the fdput() of Process A will not decrement the reference count. So f_count remains at 2. 6'b. Process B performs a read/write syscall and calls fdget_pos(). fdget_pos() sees that this file has f_count > 1 and takes the file position mutex. So this isn't a problem. The problem is when a file becomes shared implicitly without the original owner of the file knowing. > > >>>> +/// > >>>> +/// Light reference counts must be released with `fdput` before the system call returns to > >>>> +/// userspace. This means that if you wait until the current system call returns to userspace, then > >>>> +/// all light refcounts that existed at the time have gone away. > >>>> +/// > >>>> +/// ## Rust references > >>>> +/// > >>>> +/// The reference type `&File` is similar to light refcounts: > >>>> +/// > >>>> +/// * `&File` references don't own a reference count. They can only exist as long as the reference > >>>> +/// count stays positive, and can only be created when there is some mechanism in place to ensure > >>>> +/// this. > >>>> +/// > >>>> +/// * The Rust borrow-checker normally ensures this by enforcing that the `ARef<File>` from which > >>>> +/// a `&File` is created outlives the `&File`. > >>> > >>> The section confuses me a little: Does the borrow-checker always ensure > >>> that a &File stays valid or are there circumstances where it doesn't or > >>> are you saying it doesn't enforce it? > >> > >> The borrow-checker always ensures it. > > > > Ok, thanks. > > > >> > >> A &File is actually short-hand for &'a File, where 'a is some > >> unspecified lifetime. We say that &'a File is annotated with 'a. The > >> borrow-checker rejects any code that tries to use a reference after the > >> end of the lifetime annotated on it. > > > > Thanks for the explanation. > > > >> > >> So as long as you annotate the reference with a sufficiently short > >> lifetime, the borrow checker will prevent UAF. And outside of cases like > > > > Sorry, but can you explain "sufficiently short lifetime"? > > By "sufficiently short lifetime" I mean "lifetime that ends before the > object is destroyed". Ah, ok. It sounded like it was a specific concept that Rust is implementing in contrast to long-term lifetime or sm. Thanks! > > Idea being that if the lifetime ends before the object is freed, and the > borrow-checker rejects attempts to use it after the lifetime ends, then > it follows that the borrow-checker prevents use-after-frees. > > >> from_ptr, the borrow-checker also takes care of ensuring that the > >> lifetimes are sufficiently short. > >> > >> (Technically &'a File and &'b File are two completely different types, > >> so &File is technically a class of types and not a single type. Rust > >> will automatically convert &'long File to &'short File.) > >> > >>>> +/// > >>>> +/// * Using the unsafe [`File::from_ptr`] means that it is up to the caller to ensure that the > >>>> +/// `&File` only exists while the reference count is positive. > >>> > >>> What is this used for in binder? If it's not used don't add it. > >> > >> This is used on the boundary between the Rust part of Binder and the > >> binderfs component that is implemented in C. For example: > > > > I see, I'm being foiled by my own code... > > > >> > >> unsafe extern "C" fn rust_binder_open( > >> inode: *mut bindings::inode, > >> file_ptr: *mut bindings::file, > >> ) -> core::ffi::c_int { > >> // SAFETY: The `rust_binderfs.c` file ensures that `i_private` is set to the return value of a > >> // successful call to `rust_binder_new_device`. > >> let ctx = unsafe { Arc::<Context>::borrow((*inode).i_private) }; > >> > >> // SAFETY: The caller provides a valid file pointer to a new `struct file`. > >> let file = unsafe { File::from_ptr(file_ptr) }; > > > > We need a better name for this helper than from_ptr() imho. I think > > from_ptr() and as_ptr() is odd for C. How weird would it be to call > > that from_raw_file() and as_raw_file()? > > That's a reasonable name. I would be happy to rename to that, and I > don't think it is unidiomatic. Thanks! > > > But bigger picture I somewhat struggle with the semantics of this > > because this is not an interface that we have in C and this is really > > about a low-level contract between C and Rust. Specifically this states > > that this pointer is _somehow_ guaranteed valid. And really, this seems > > a bit of a hack. > > Indeed ... but I think it's a quite common hack. After all, any time you > dereference a raw pointer in Rust, you are making the same assumption. > > > Naively, I think this should probably not be necessary if > > file_operations are properly wrapped. Or it should at least be demotable > > to a purely internal method that can't be called directly or something. > > Yes, the usage here of File::from_ptr could probably be hidden inside a > suitably designed file_operations wrapper. The thing is, Rust Binder > doesn't currently use such a wrapper at all. It just exports a global of > type file_operations and the C code in binderfs then references that > global. Yeah. > > Rust Binder used to use such an abstraction, but I ripped it out before > sending the Rust Binder RFC because it didn't actually help. It was > designed for cases where the file system is also implemented in Rust, so > to get it to expose a file_operations global to the C code in binderfs, > I had to reach inside its internal implementation. It did not save me > from doing stuff such as using File::from_ptr from Binder. > > Now, you could most likely modify those file_operations abstractions to > support my use-case better. But calling into C is already unsafe, so > unless we get multiple drivers that have a similar C/Rust split, it's > not clear that it's useful to extract the logic from Binder. I would > prefer to wait for the file_operations abstraction to get upstreamed by > the people working on VFS bindings, and then we can decide whether we > should rewrite binderfs into Rust and get rid of the logic, or whether > it's worth to expand the file_operations abstraction to support split > C/Rust drivers like the current binderfs. > > > So what I mean is. fdget() may or may not take a reference. The C > > interface internally knows whether a reference is owned or not by > > abusing the lower two bits in a pointer to keep track of that. Naively, > > I would expect the same information to be available to rust so that it's > > clear to Rust wheter it's dealing with an explicitly referenced file or > > an elided-reference file. Maybe that's not possible and I'm not > > well-versed enough to see that yet. > > I'm sure Rust can access the same information, but I don't think I'm > currently doing anything that cares about the distinction? Ok. My main goal is that we end up with an almost 1:1 correspondence between the Rust and C interface so it's easy for current maintainers and developers that don't want to care about Rust to continue to do so and also just somewhat verify that changes they do are sane. > > >> let process = match Process::open(ctx, file) { > >> Ok(process) => process, > >> Err(err) => return err.to_errno(), > >> }; > >> // SAFETY: This file is associated with Rust binder, so we own the `private_data` field. > >> unsafe { > >> (*file_ptr).private_data = process.into_foreign().cast_mut(); > >> } > >> 0 > >> } > >> > >> Here, rust_binder_open is the open function in a struct file_operations > >> vtable. In this case, file_ptr is guaranteed by the caller to be valid > > > > Where's the code that wraps struct file_operations? > > Please see drivers/android/rust_binder.rs in the binderfs patch [2] in > the Rust Binder RFC. Ok, I need to just find time to do that...:) > > >> for the duration of the call to rust_binder_open. Binder uses from_ptr > >> to get a &File from the raw pointer. > >> > >> As far as I understand, the caller of rust_binder_open uses fdget to > >> ensure that file_ptr is valid for the duration of the call, but the Rust > >> code doesn't assume that it does this with fdget. As long as file_ptr is > >> valid for the duration of the rust_binder_open call, this use of > >> from_ptr is okay. It will continue to work even if the caller is changed > >> to use fget. > > > > Ok. > > > > [1]: https://rust-for-linux.com/klint > [2]: https://lore.kernel.org/rust-for-linux/20231101-rust-binder-v1-2-08ba9197f637@xxxxxxxxxx/ > > Alice
