I had attached the wrong file - reattaching the correct patch (ie that
updates the previous version to use PAGE_SIZE instead of 4096)
On Wed, Feb 7, 2024 at 1:12 AM Steve French <smfrench@xxxxxxxxx> wrote:
>
> Updated patch - now use PAGE_SIZE instead of hard coding to 4096.
>
> See attached
>
> On Tue, Feb 6, 2024 at 11:32 PM Steve French <smfrench@xxxxxxxxx> wrote:
> >
> > Attached updated patch which also adds check to make sure max write
> > size is at least 4K
> >
> > On Tue, Feb 6, 2024 at 10:58 PM Steve French <smfrench@xxxxxxxxx> wrote:
> > >
> > > > his netfslib work looks like quite a big refactor. Is there any plans to land this in 6.8? Or will this be 6.9 / later?
> > >
> > > I don't object to putting them in 6.8 if there was additional review
> > > (it is quite large), but I expect there would be pushback, and am
> > > concerned that David's status update did still show some TODOs for
> > > that patch series. I do plan to upload his most recent set to
> > > cifs-2.6.git for-next later in the week and target would be for
> > > merging the patch series would be 6.9-rc1 unless major issues were
> > > found in review or testing
> > >
> > > On Tue, Feb 6, 2024 at 9:42 PM Matthew Ruffell
> > > <matthew.ruffell@xxxxxxxxxxxxx> wrote:
> > > >
> > > > I have bisected the issue, and found the commit that introduces the problem:
> > > >
> > > > commit d08089f649a0cfb2099c8551ac47eef0cc23fdf2
> > > > Author: David Howells <dhowells@xxxxxxxxxx>
> > > > Date: Mon Jan 24 21:13:24 2022 +0000
> > > > Subject: cifs: Change the I/O paths to use an iterator rather than a page list
> > > > Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d08089f649a0cfb2099c8551ac47eef0cc23fdf2
> > > >
> > > > $ git describe --contains d08089f649a0cfb2099c8551ac47eef0cc23fdf2
> > > > v6.3-rc1~136^2~7
> > > >
> > > > David, I also tried your cifs-netfs tree available here:
> > > >
> > > > https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs.git/log/?h=cifs-netfs
> > > >
> > > > This tree solves the issue. Specifically:
> > > >
> > > > commit 34efb2a814f1882ddb4a518c2e8a54db119fd0d8
> > > > Author: David Howells <dhowells@xxxxxxxxxx>
> > > > Date: Fri Oct 6 18:29:59 2023 +0100
> > > > Subject: cifs: Cut over to using netfslib
> > > > Link: https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs.git/commit/?h=cifs-netfs&id=34efb2a814f1882ddb4a518c2e8a54db119fd0d8
> > > >
> > > > This netfslib work looks like quite a big refactor. Is there any plans to land this in 6.8? Or will this be 6.9 / later?
> > > >
> > > > Do you have any suggestions on how to fix this with a smaller delta in 6.3 -> 6.8-rc3 that the stable kernels can use?
> > > >
> > > > Thanks,
> > > > Matthew
> > >
> > >
> > >
> > > --
> > > Thanks,
> > >
> > > Steve
> >
> >
> >
> > --
> > Thanks,
> >
> > Steve
>
>
>
> --
> Thanks,
>
> Steve
--
Thanks,
Steve
From f2ca862debd8b9875b5448553be0f2178fc4231f Mon Sep 17 00:00:00 2001
From: Steve French <stfrench@xxxxxxxxxxxxx>
Date: Tue, 6 Feb 2024 16:34:22 -0600
Subject: [PATCH 01/26] smb: Fix regression in writes when non-standard maximum
write size negotiated
The conversion to netfs in the 6.3 kernel caused a regression when
maximum write size is set by the server to an unexpected value which is
not a multiple of 4096 (similarly if the user overrides the maximum
write size by setting mount parm "wsize", but sets it to a value that
is not a multiple of 4096). When negotiated write size is not a
multiple of 4096 the netfs code can skip the end of the final
page when doing large sequential writes, causing data corruption.
This section of code is being rewritten/removed due to a large
netfs change, but until that point (ie for the 6.3 kernel until now)
we can not support non-standard maximum write sizes.
Add a warning if a user specifies a wsize on mount that is not
a multiple of 4096, and also add a change where we round down the
maximum write size if the server negotiates a value that is not
a multiple of 4096 (we also have to check to make sure that
we do not round it down to zero).
Reported-by: R. Diez" <rdiez-2006@xxxxxxx>
Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Suggested-by: Ronnie Sahlberg <ronniesahlberg@xxxxxxxxx>
Acked-by: Ronnie Sahlberg <ronniesahlberg@xxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx # v6.3+
Cc: David Howells <dhowells@xxxxxxxxxx>
Signed-off-by: Steve French <stfrench@xxxxxxxxxxxxx>
---
fs/smb/client/connect.c | 13 +++++++++++--
fs/smb/client/fs_context.c | 2 ++
2 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/fs/smb/client/connect.c b/fs/smb/client/connect.c
index bfd568f89710..46b3aeebfbf2 100644
--- a/fs/smb/client/connect.c
+++ b/fs/smb/client/connect.c
@@ -3438,8 +3438,17 @@ int cifs_mount_get_tcon(struct cifs_mount_ctx *mnt_ctx)
* the user on mount
*/
if ((cifs_sb->ctx->wsize == 0) ||
- (cifs_sb->ctx->wsize > server->ops->negotiate_wsize(tcon, ctx)))
- cifs_sb->ctx->wsize = server->ops->negotiate_wsize(tcon, ctx);
+ (cifs_sb->ctx->wsize > server->ops->negotiate_wsize(tcon, ctx))) {
+ cifs_sb->ctx->wsize = round_down(server->ops->negotiate_wsize(tcon, ctx), PAGE_SIZE);
+ /*
+ * in the very unlikely event that the server sent a max write size under PAGE_SIZE,
+ * (which would get rounded down to 0) then reset wsize to absolute minimum eg 4096
+ */
+ if (cifs_sb->ctx->wsize == 0) {
+ cifs_sb->ctx->wsize = PAGE_SIZE;
+ cifs_dbg(VFS, "wsize too small, reset to minimum ie PAGE_SIZE, usually 4096\n");
+ }
+ }
if ((cifs_sb->ctx->rsize == 0) ||
(cifs_sb->ctx->rsize > server->ops->negotiate_rsize(tcon, ctx)))
cifs_sb->ctx->rsize = server->ops->negotiate_rsize(tcon, ctx);
diff --git a/fs/smb/client/fs_context.c b/fs/smb/client/fs_context.c
index 52cbef2eeb28..600a77052c3b 100644
--- a/fs/smb/client/fs_context.c
+++ b/fs/smb/client/fs_context.c
@@ -1111,6 +1111,8 @@ static int smb3_fs_context_parse_param(struct fs_context *fc,
case Opt_wsize:
ctx->wsize = result.uint_32;
ctx->got_wsize = true;
+ if (round_up(ctx->wsize, PAGE_SIZE) != ctx->wsize)
+ cifs_dbg(VFS, "wsize should be a multiple of 4096 (PAGE_SIZE)\n");
break;
case Opt_acregmax:
ctx->acregmax = HZ * result.uint_32;
--
2.40.1
